Lightgun support added to PCSX-Rearmed
-
Hi
Yes SMS/Genesis/SegaCD is sorted, just slowly getting various fixes merged in the right sequence.
Best regards
MrLightgun
-
@MrLightgun Fantastic news! Much thanks!
-
Sorry for the n00b question but I'm getting frustrated here since I can't get my gun to work. I've set up pcsx-rearmed just like you explained. When I connect my AimTrak Gun to the pi, it tells me something like "Ultimark not configure" ok. Where can I configure it? Tried to configure it in RetroArch but the Trigger isn't recognized...the A and B Buttons are. Also I cannot figure out how to open the menu in pcsx-rearmed to change the Pad Type to guncon...
Can someone please tell a noob how to get this working?
thanks in advance
My RetroArch Version is 1.8.5
-
@MasterGollom I think you have to calibrate the gun before you use it in software.
I think this was shared in the past, its not my code and no clue if this does the trick for you, but worth a test:
https://github.com/gunpadawan/gunconf -
@HurricaneFan Thx for the reply, I'll give it a try
-
Hi everyone,
I have been working and building a collection of emulators that work with Dolphinbar while I await for my Sinden light guns on my Raspberry Pi 4. Anyway, I consider NES and Master System 100% working when using the touch screen setting in RetroArch (lr-fceumm and lr-genesis-gx). MAME 2003 Plus games like Area 51, Space Gun, Egg Adventure, Aliens 3, Jurassic Park work fairly decent.
So this leaves me with Genesis, SNES, Dreamcast, and PlayStation. I can get Genesis (Mega Drive) and SNES partially working, however, I am unable to get the second trigger button working - this is the literal show stopper for some games. Has anyone figured this out?
As for Dreamcast, I can get the trigger working, but not the mouse/touch feature to move the crosshair. Any suggestions on how to get this working?
PSX - for some stupid reason, I cannot get it working at all. I know u/MrLightgun had it working and it should have been implemented by now, but I cannot for the life of me figure it out.
I appreciate any help. I feel like my research and experimentation is getting ever so closer to my goal.
I appreciate any advice or pointers on these issues, because it's been awesome being able to relive some of the glory days of gaming.
-
The latest version of PCSX-rearmed adds support for playstation mouse. This makes mouse-based guns work but quite jerky because I assume they use relative, rather than absolute coordinates. On the other hand, setting input to guncon does nothing for lightguns. So I assume the patch was never merged?
-
Hi Guys
A question for both you guys ... Just curious did you guys happen to get the Dolphen /Wii mote to work on megadrive / Genesis games
It seems like I have tried everything and haven't gotten it to work
What setting would I need to put ?
Really want to play body count with Dolphen /Wii mote support
-
@escc1986 read my post at the bottom of this thread for set up
-
Hi Andy
Thank you very much for the help !!!!
I really appreciate it
Just curious , I just talked to Mr Light Gun and he is looking for someone who will design crosshairs for the PS1 pcsx Ir-rearmed Emulator , if you know or talk to anyone , hope you can put the word out there
Hope we can get crosshairs support on PS1 games :)
-
I belive I found someone who is interested in helping out this light gun community
By willing to make a PS1 Crosshair Graphics output for the pcsx-rearmed
Not sure what to do now , he needs answers to questions that only mr LightGun could provide answer to , ... I emailed Mr LightGun and and haven't heard back from yet , but one of these days he will get around to messaging me I'm sure , but this is amazing news and potential hope for playing PS1 games with a Crosshair :) .... I'm excited
-
@escc1986 I ordered a Sinden Lightgun with recoil, in the meantime I play with an airmouse with mame2003 and Dreamcast with crosshair in the screen. Very funny.
But, any news for PCSX-rearmed crosshair?
-
This post is deleted! -
Thank you for posting this, I had actually created a topic earlier about POV shooter/light gun games and deleted it as soon as I saw this one. Anyway, I guess I'm late to the game, but has anyone had any success getting some of these games to work?
Mainly just ask because I'm brand new to the Pi world, just got a Pi4 recently and am still in the process of researching different emulators (ideally for some arcade/MAME games) and gauging the difficulty of getting some of these games to work, since I don't consider myself particularly computer savvy. So I already understand that configuring MAME games is gonna be tricky, and these shooter ones probably even more so...
Speaking of console shooters, I DO remember trying to plug in my old SNES/Super Scope to my flatscreen to play its light gun games like Battle Clash 1 & 2 (what can I say, I love sci-fi & giant robots), but through my lack of success was lead to understand that the light guns were mainly designed for old cathode ray/CRTVs. So, if any fixes have gotten around this hardware/tech issue, I'm very curious.
I've managed to play some basic POV shooter games before on MAME like Operation Wolf (but fortunately with that one, you had an on-screen cursor that you could move around/aim and shoot even if you were using a keyboard/mouse). However I did run into others-- like Beast Busters-- where what you were aiming at WASN'T as clear, and by the time you'd reached the 2nd level or so, the aim was so off/you were basically just shooting off-screen the entire time as to make the game unplayable. Guess it was a configuration issue, but I never managed to figure it out (which is a bummer, because I also dig horror/zombie-type content).
Complicating things further are these modern POV shooters like Area 51, House Of The Dead etc where-- unlike those 2 arcade ones I mentioned-- you had an unmounted, loose pistol setup where you had to point/shoot off screen to reload... so I'd be curious if any light gun peripherals/configurations have solved this issue as well??
-
@technofox I'm in the exact same spot you are...NES works, MAME works with config mapped for each game, SNES trigger works, but not cursor or turbo button no matter how I remap in the Input config menu.....hotd2 for Naomi/Dreamcast almost works on redream, but I only can move the cursor in the upper-left corner of the screen (it has something to do with the resolution multiplier I believe)....I'm on a Pi4
-
@danman said in Lightgun support added to PCSX-Rearmed:
hotd2 for Naomi/Dreamcast almost works on redream, but I only can move the cursor in the upper-left corner of the screen (it has something to do with the resolution multiplier I believe)....I'm on a Pi4
i use ir-flycast only for HOTD2, Confidential Mission, Death Crimson... redream for others.
-
@danman how do you have your snes config? I can't get anything to work using snes9x2010 and any light gun game for snes. I have a pi3b+, fresh sd card image from retro pie website, a white wii remote non motion plus and an oem Nintendo light bar that I removed 4 of the leds out of and put a usb type a and on. Works great for nes and most Sega master system games (two sms games don't fully work, can see/move the cross hairs and fire but the cross hairs in the game don't sync with the emulators cross hairs).
I can play most Sega genesis light gun games but can't shoot off screen to reload in the games that use the justifier guns rather than menecer gun and if there is a second trigger on the menecer like technofox talked about above, I don't think that works either.
I have the Wii remote working as a mouse using wminput and setting button b to mouse button 1 and button a to mouse button 2. The res of the Wii remote buttons are mapped to keyboard keys which don't work when in game which sucks to say the least
Anyway I know it's not my equipment because nes works perfect and as I said most of the sms library works perfectly also. So hopefully you can help me out with snes config so i can get somewhere with that. I'll get the name of the two sms games that wouldn't work later today if maybe someone wants to test them and see what they can come up with.
-
@polygaryd You need to use lr-snes9x to use light gun games, 2010 doesn't support light guns. At least that was the case last time I checked.
-
@g30ff ok I didn't see that as an emulator option. I have to add it to my systems file. I made my own light guns system in retropie and put multiple different system roms in it such as nes, snes, sms, atari 2600, atari 7200, atari xe, dreamcast, ps1, Sega genesis, meme.
So I have a long list of emulators so I must have missed that snes9x emulator. I'll take a look and report back. I now understand that non of the atari emulators support the light gun games.
-
I added lr-snes9x from the core packages and then into my lightgun system emulator.cfg file. I changed all the snes games to the lr-snes9x and I do have light gun support now. A couple games work but only with the fire button and for games like yoshi safari where you need other buttons obviously its not very playable. Other games like tinstar are not only are not synced up with the cross hairs but won't get past the test fire screen. T2 arcade, Lamborghini challenge, and xzone seem to work fine. I never had a superscope with a real snes console so I'm not sure if I'd need the other buttons later in the game.
Also the two Sega master system games That don't work with the light gun (fire button works and retroarch crosshair moves but won't sync with in game crosshair are assault city and lazer ghost.
We need a way to implement key mapping to the mouse button 2 and 3(click wheel) for alternate trigger buttons for menecer and superscope. Mouse button 1 is fire button by default and works in every game. And of course fix the sync issues in the few games that don't work to sync patriarch crosshair with in game crosshair. Then this would be amazing.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.