ScummVM Controlller Issues
-
@ExarKunIv said in ScummVM Controlller Issues:
if [ "$1" = "scummvm" ]
then
sudo killall > /dev/null 2>&1 xboxdrv
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv > /dev/null 2>&1
--evdev /dev/input/event0
--silent
--detach-kernel-driver
--force-feedback
--mimic-xpad
--trigger-as-button
--evdev-absmap ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y
--evdev-keymap BTN_EAST=a,BTN_SOUTH=b,BTN_[•]=x,BTN_[•]=y,BTN_[•]=lb,BTN_[•]=rb,BTN_TL2=back,BTN_TR2=start
--ui-axismap dpad_x=REL_X:10,dpad_y=REL_Y:10
--ui-buttonmap a=BTN_LEFT,b=BTN_RIGHT,start=KEY_F5,back=KEY_ESC
--ui-buttonmap guide=void,x=void,y=void,lb=void,rb=void,tl=void,tr=void,lt=void,rt=void,
&
filet me test it .... lets see .. fingers crossed
-
unfortunately it did not work
dPad was not working
-
dang, well im working on getting my drivers up and going again, till then i dont have much else i can offer.
, but ill keep digging a very long guidehttps://retropie.org.uk/forum/topic/2861/guide-advanced-controller-mappings/133?_=1581437532429
-
im sorry to be a big bother ... i apprecite the help .. its ok i will wai for as long as you could get your drivers up ...
something is overiding the controllers possiblty
i just changed my start key assainged to my B button
and changed my A key assigned it to my space key ...
no matte what changes and combonations
my controller
L = f5
R = space
i know the biggest issue is the dpad .... but any idea ...
-
post what you changed
-
#!/bin/sh if [ "$1" = "scummvm" ] then sudo killall > /dev/null 2>&1 xboxdrv sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv > /dev/null 2>&1 \ --evdev /dev/input/event0 \ --silent \ --detach-kernel-driver \ --force-feedback \ --mimic-xpad \ --trigger-as-button \ --evdev-absmap ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y \ --evdev-keymap BTN_TL2=a,BTN_TR2=b,BTN_[•]=x,BTN_[•]=y,BTN_WEST=lb,BTN_Z=rb,BTN_EAST=back,BTN_SOUTH=start / --ui-axismap dpad_x=REL_X:10,dpad_y=REL_Y:10 \ --ui-buttonmap a=BTN_LEFT,b=BTN_RIGHT,start=KEY_F5,back=KEY_ESC \ --ui-buttonmap guide=void,x=void,y=void,lb=void,rb=void,tl=void,tr=void,lt=void,rt=void, \ & fi -
@escc1986 said in ScummVM Controlller Issues:
--evdev-keymap BTN_TL2=a,BTN_TR2=b,BTN_[•]=x,BTN_[•]=y,BTN_WEST=lb,BTN_Z=rb,BTN_EAST=back,BTN_SOUTH=start /
--evdev-keymap BTN_TL2=a,BTN_TR2=b,BTN_[•]=x,BTN_[•]=y,BTN_WEST=lb,BTN_Z=rb,BTN_EAST=back,BTN_SOUTH=start / -
ok this might be a pain for you, and im sorry.
but wipe everything out of the runcommmand.save it in a txt file of course.
i want to see if there is something overriding what we are trying to do, cuz what you posted should of changed when you changed the mapping
also you have xboxdrv installed
reboot after you wiped the file
-
ok sure
no problem
will let you know when done
-
#!/bin/sh if [ "$1" = "scummvm" ] then sudo killall >> /dev/shm/runcommand.log 2>&1 xboxdrv sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv >> /dev/shm/runcommand.log 2>&1 \ --evdev /dev/input/event0 \ --silent --detach-kernel-driver --force-feedback --deadzone-trigger 15% --deadzone 4000 --mimic-xpad --evdev-absmap ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y --evdev-keymap BTN_TL2=a,BTN_TR2=b,BTN_[•]=x,BTN_[•]=y,BTN_WEST=lb,BTN_Z=rb,BTN_EAST=back,BTN_SOUTH=start --dpad-only --ui-axismap lt=void,rt=void --ui-buttonmap a=BTN_EAST,b=BTN_SOUTH,start=KEY_F5,back=KEY_ESC \ & f1 omxplayer -b "/home/pi/video/intro.mp4" > /dev/null & # the line below is needed to use the joystick selection by name method bash "/opt/retropie/supplementary/joystick-selection/js-onstart.sh" "$@" [[ $2 == openbor ]] && filename=$(basename "$3") && cp "/opt/retropie/ports/openbor/Saves/master.cfg" "/opt/retropie/ports/openbor/Sav$ -
ok
wiped the runcommand
rebooted
now what would you like me to do
-
start scrumm get in a game and see if the controller does anything like before
it should not do athing not even the triggers with f5 and space
-
just tested now
same
R - f5
L- space
so what is taking over
i have xboxdrv installed
-
perhaps ... do you need me to send you any config files in my pi ?
-
no clue.
at with what you showed me. those keys should not do anything.
unless our setup is not working and those are just set up from the devs of scummso since you have nothing in the run command
we can do a different way of testingwith a game running
put this in putty
/opt/retropie/supplementary/xboxdrv/bin/xboxdrv \ --evdev /dev/input/event0 \ --silent \ --detach-kernel-driver \ --force-feedback \ --mimic-xpad \ --trigger-as-button \ --evdev-absmap ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y \ --evdev-keymap KEY_#305=a,KEY_#304=b,KEY_#307=x,KEY_#308=y,KEY_#310=tl,KEY_#311=tr,KEY_#314=back,KEY_#315=start \ --ui-axismap dpad_x=REL_X:10,dpad_y=REL_Y:10 \ --ui-buttonmap a=BTN_LEFT,b=BTN_RIGHT,start=KEY_F5,back=KEY_ESC \ --ui-buttonmap guide=void,x=void,y=void,lb=void,rb=void,tl=void,tr=void,lt=void,rt=void,back=void \ --ui-axismap x2=voidthis a shortcut on testing
-
@ExarKunIv said in ScummVM Controlller Issues:
/opt/retropie/supplementary/xboxdrv/bin/xboxdrv
--evdev /dev/input/event0
--silent
--detach-kernel-driver
--force-feedback
--mimic-xpad
--trigger-as-button
--evdev-absmap ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y
--evdev-keymap KEY_#305=a,KEY_#304=b,KEY_#307=x,KEY_#308=y,KEY_#310=tl,KEY_#311=tr,KEY_#314=back,KEY_#315=start
--ui-axismap dpad_x=REL_X:10,dpad_y=REL_Y:10
--ui-buttonmap a=BTN_LEFT,b=BTN_RIGHT,start=KEY_F5,back=KEY_ESC
--ui-buttonmap guide=void,x=void,y=void,lb=void,rb=void,tl=void,tr=void,lt=void,rt=void,back=void
--ui-axismap x2=voidxboxdrv 0.8.8 - http://pingus.seul.org/~grumbel/xboxdrv/ Copyright © 2008-2011 Ingo Ruhnke <grumbel@gmail.com> Licensed under GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details. -- [ ERROR ] ------------------------------------------------------ Error: No stuitable uinput device found, tried: /dev/input/uinput: No such file or directory /dev/uinput: Permission denied /dev/misc/uinput: No such file or directory Troubleshooting: * make sure uinput kernel module is loaded * make sure joydev kernel module is loaded * make sure you have permissions to access the uinput device * start the driver with ./xboxdrv -v --no-uinput to see if the driver itself works -
ok that is what im getting too.
i think we need some more help on this
i just hope he is still coming here
-
hope we may get the help on here
hope its a simple fix
im sorry for the trouble ,
hummm i wonder , whats wrong
-
@escc1986 no trouble, im having the same thing so its a problem for me too
-
hope we may get the hep :)
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.