(REQUEST) Add Daphne Singe emulator?

Darksavior

@saturnx thanks, looking forward to it. I couldn't get Daphne to compile back when I tried it. I'm fine without the splash since my setup boots in around 30sec.

SaturnX

@darksavior I'm hoping I'll have some time in the next week or so to dive into the details (especially when it comes to hooking everything in with EmulationStation).

The main quirk I had was just selecting the correct makefile (which for the pi is Makefile.linux_x64), then it should be as simple as:

Ensure you've got the right dependencies:

sudo apt install libsdl-dev libglew-dev libvorbis-dev libsdl-image1.2-dev libsdl-ttf2.0-dev

Then clone the repo:

git clone https://github.com/DirtBagXon/daphne.git daphne

Compile with the following steps:

cd daphne/src/vldp2
./configure --disable-accel-detect
make -f Makefile.linux_x64
cd ../game/singe
make -f Makefile.linux_x64
cd ../..
ln -s Makefile.vars.linux_x64 Makefile.vars
make
cd ..
mkdir -p ~/.daphne
cp -a pics sound ~/.daphne/

I then opted to use @DirtBagXon custom run scripts for greater flexibility, you can find them here (see run.sh):
https://github.com/DirtBagXon/daphne/tree/master/custom

Then it's a matter of setting up all the symlinks, as this build expects the following:

roms: ~/.daphne/roms/
video files: ~/.daphne/vldp_dl/[game]

Once I set those up, everything booted up perfectly from the command line.

Now that I think about it, and maybe @DirtBagXon could confirm - but instead of symlinks, could we not simply modify the run.sh script to target the typical locations on a RetroPie install?

I'm assuming it's hardcoded that for the rom files, daphne will look under $DATADIR/roms/[game].zip?

If that's the case then I can put together a modified version of the run script to map back to how daphne games would typically be installed on RetroPie.

DirtBagXon

@saturnx said in (REQUEST) Add Daphne Singe emulator?:

@dirtbagxon Once again... a HUGE thanks!

I find it extremely interesting there is such a stark difference between the RetroPie build of daphne and yours. It's a shame, it would be great if your enhancements were pulled into the RetroPie build so this was a far less manual exercise.

I think this demonstrates the issues arising in porting software. As I stated my version is far closer to original source than that of RetroPie, libretro and hypseus ports.
All of which seem to have different issues.

If I can find the time, I'll see about putting together another guide for your daphne build.

I'm certain many users would appreciate that.

I have made some discoveries on the hypseus port, and have some games running better. I may delve more if I find some time.....

Thanks to both you guys for your help in testing all this too...

DirtBagXon

@saturnx said in (REQUEST) Add Daphne Singe emulator?:

Now that I think about it, and maybe @DirtBagXon could confirm - but instead of symlinks, could we not simply modify the run.sh script to target the typical locations on a RetroPie install?

Absolutely, you can write a custom run.sh for Daphne and Singe.

I would be happy to merge into my repos if you create a pull request.

SaturnX

@dirtbagxon said in (REQUEST) Add Daphne Singe emulator?:

@saturnx said in (REQUEST) Add Daphne Singe emulator?:

Now that I think about it, and maybe @DirtBagXon could confirm - but instead of symlinks, could we not simply modify the run.sh script to target the typical locations on a RetroPie install?

Absolutely, you can write a custom run.sh for Daphne and Singe.

I would be happy to merge into my repos if you create a pull request.

Excellent! I'll put some time into that with the end goal of making it extremely easy for other RetroPie users. I'll play around and see what I can come up with.

DirtBagXon

Some movement on the Hypseus (Daphne SDL2 replacement) working with 64bit Kernel + KMS for those interested:

https://retropie.org.uk/forum/post/254871

TreasureFingers

@saturnx said in (REQUEST) Add Daphne Singe emulator?:

@dirtbagxon said in (REQUEST) Add Daphne Singe emulator?:

@saturnx said in (REQUEST) Add Daphne Singe emulator?:

Now that I think about it, and maybe @DirtBagXon could confirm - but instead of symlinks, could we not simply modify the run.sh script to target the typical locations on a RetroPie install?

Absolutely, you can write a custom run.sh for Daphne and Singe.

I would be happy to merge into my repos if you create a pull request.

Excellent! I'll put some time into that with the end goal of making it extremely easy for other RetroPie users. I'll play around and see what I can come up with.

Seriously can't wait to see the script. i've been following this but keep getting stuck on things. I've been dying to finally play these games.
thank you

DirtBagXon

@treasurefingers said in (REQUEST) Add Daphne Singe emulator?:

@saturnx said in (REQUEST) Add Daphne Singe emulator?:

@dirtbagxon said in (REQUEST) Add Daphne Singe emulator?:

@saturnx said in (REQUEST) Add Daphne Singe emulator?:

Now that I think about it, and maybe @DirtBagXon could confirm - but instead of symlinks, could we not simply modify the run.sh script to target the typical locations on a RetroPie install?

Absolutely, you can write a custom run.sh for Daphne and Singe.

I would be happy to merge into my repos if you create a pull request.

Excellent! I'll put some time into that with the end goal of making it extremely easy for other RetroPie users. I'll play around and see what I can come up with.

Seriously can't wait to see the script. i've been following this but keep getting stuck on things. I've been dying to finally play these games.
thank you

@SaturnX

Can I suggest that you hold off a little on doing too much work on documenting/scripting this version of Daphne/Singe. I am making good progress on getting Hypseus Singe working which should be a big improvement and far easier to create an installation, as it will twin as a SDLv2 Daphne replacement too. It is a monolithic statically linked binary so doesn't require dealing with the libvldp2.so and libsinge.so shared libraries. Which means you can drop it anywhere and run it.

I don't think ActionMax games (if they are important to you ) are going to be implemented in Hypseus Singe at this point.
The overlay indexes will need some work to transfer to SDLv2.

https://retropie.org.uk/forum/post/255510

I just need to find time now....

SaturnX

@dirtbagxon Thanks for the heads up!

I just got your daphne build up and running on my Pi4 (Kernel 5.10.17 w/ Full KMS driver). It's running like a dream.

I quickly put together a a small script just for it to hook in nicely with EmulationStation and to allow me to keep the ROM structure identical to the RetroPie build of Daphne. It's still rough since it meets my needs (also needs a couple symlinks), so I'll hold off on polishing it up.

I'm excited to see the developments on hypseus - I'm actively watching that thread.

I completely agree about finding time... haha. There just never seems to be enough!

TreasureFingers

@dirtbagxon said in (REQUEST) Add Daphne Singe emulator?:

@treasurefingers said in (REQUEST) Add Daphne Singe emulator?:

@saturnx said in (REQUEST) Add Daphne Singe emulator?:

@dirtbagxon said in (REQUEST) Add Daphne Singe emulator?:

@saturnx said in (REQUEST) Add Daphne Singe emulator?:

Now that I think about it, and maybe @DirtBagXon could confirm - but instead of symlinks, could we not simply modify the run.sh script to target the typical locations on a RetroPie install?

Absolutely, you can write a custom run.sh for Daphne and Singe.

I would be happy to merge into my repos if you create a pull request.

Excellent! I'll put some time into that with the end goal of making it extremely easy for other RetroPie users. I'll play around and see what I can come up with.

Seriously can't wait to see the script. i've been following this but keep getting stuck on things. I've been dying to finally play these games.
thank you

@SaturnX

Can I suggest that you hold off a little on doing too much work on documenting/scripting this version of Daphne/Singe. I am making good progress on getting Hypseus Singe working which should be a big improvement and far easier to create an installation, as it will twin as a SDLv2 Daphne replacement too. It is a monolithic statically linked binary so doesn't require dealing with the libvldp2.so and libsinge.so shared libraries. Which means you can drop it anywhere and run it.

I don't think ActionMax games (if they are important to you ) are going to be implemented in Hypseus Singe at this point.
The overlay indexes will need some work to transfer to SDLv2.

https://retropie.org.uk/forum/post/255510

I just need to find time now....

so are action max games out of the question?

DirtBagXon

@treasurefingers said in [(REQUEST) Add Daphne Singe emulator?]

so are action max games out of the question?

Nothing is out of the question, I am just not sure how best to do it at this point :)

DirtBagXon

https://retropie.org.uk/forum/post/255510

DirtBagXon

Hypseus Singe now a direct drop-in replacement for RetroPie Daphne plugin:

https://github.com/DirtBagXon/hypseus-singe/blob/master/src/3rdparty/retropie/RETROPIE.md

Requires RetroPie scripts to extent the Singe element....

TreasureFingers

@dirtbagxon said in (REQUEST) Add Daphne Singe emulator?:

Hypseus Singe now a direct drop-in replacement for RetroPie Daphne plugin:

https://github.com/DirtBagXon/hypseus-singe/blob/master/RETROPIE.md

Requires RetroPie scripts to extent the Singe element....

I saw the script in the link you posted does that mean @SaturnX doesnt need to write a script now? Also it does it run all the aforementioned games you were talking about Time Gal ,Mad Dog McCree, bega , road blaster etc. exluding action max . lastly would do we have to add it to the menu or does the script do that aswell. (just asking)

Great job!