basic 2 player support not working correctly

puppetj

Clyde

He means mitu's post above:

@puppetj In this case, check the controller configuration file - it should be in \\retropie\configs\all\retroarch-joypads, named probably Logitech Logitech Cordless RumblePad 2.cfg. Does it have a hotkey defined ? You can post its contents here in the topic.

puppetj

@clyde i dont know if this is a hint of the issue, but as the other person said, about the usb ports having order and controller 1 needs to be in usb port 0 and controller 2 needs to be in usb port 1, i had controller 1 in usb port 0 and controller 2 in usb 2 and they worked fine.

puppetj

@clyde

input_device = "Logitech Logitech Cordless RumblePad 2"
input_driver = "udev"
input_r3_btn = "11"
input_l_btn = "4"
input_up_axis = "-1"
input_left_axis = "-0"
input_select_btn = "8"
input_r2_btn = "7"
input_l_y_plus_btn = "h0leftanalogdown"
input_right_axis = "+0"
input_l2_btn = "6"
input_l_x_minus_btn = "h0leftanalogleft"
input_l3_btn = "10"
input_r_btn = "5"
input_l_y_minus_btn = "h0leftanalogup"
input_y_btn = "0"
input_x_btn = "3"
input_down_axis = "+1"
input_start_btn = "9"
input_b_btn = "1"
input_a_btn = "2"

puppetj

@clyde heres the "Logitech Logitech Cordless RumblePad 2.cfg" ALSO

input_device = "Logitech Logitech Cordless RumblePad 2"
input_driver = "udev"
input_enable_hotkey_btn = "8"
input_r3_btn = "11"
input_r_y_minus_axis = "-3"
input_l_btn = "4"
input_load_state_btn = "4"
input_r_y_plus_axis = "+3"
input_up_btn = "h0up"
input_left_btn = "h0left"
input_state_slot_decrease_btn = "h0left"
input_select_btn = "8"
input_r2_btn = "7"
input_r_x_minus_axis = "-2"
input_l_y_plus_axis = "+1"
input_l_x_plus_axis = "+0"
input_right_btn = "h0right"
input_state_slot_increase_btn = "h0right"
input_l2_btn = "6"
input_l_x_minus_axis = "-0"
input_r_x_plus_axis = "+2"
input_l3_btn = "10"
input_r_btn = "5"
input_save_state_btn = "5"
input_l_y_minus_axis = "-1"
input_y_btn = "0"
input_x_btn = "3"
input_menu_toggle_btn = "3"
input_down_btn = "h0down"
input_start_btn = "9"
input_exit_emulator_btn = "9"
input_b_btn = "1"
input_reset_btn = "1"
input_a_btn = "2"

lostless

@puppetj said in basic 2 player support not working correctly:

@clyde i dont know if this is a hint of the issue, but as the other person said, about the usb ports having order and controller 1 needs to be in usb port 0 and controller 2 needs to be in usb port 1, i had controller 1 in usb port 0 and controller 2 in usb 2 and they worked fine.

So are they working fine? Have you tried to reconfigure the controllers?

dankcushions

@puppetj one of these has bindings for hotkeys, etc, and one doesn’t. so i would presume that when one of your controllers is plugged in to p1 it works, and when the other works, it doesn’t? in that case you can reset the controllers and rebind via retropie-setup :

Choose Manage Packages.
Choose Manage Core Packages.
Choose emulationstation (Installed)
Choose Configurations / Options (it may also be named Configurations Tools)
Choose the option to Clear/Reset Emulation Station input configuration.
Choose Yes to proceed to clear the controller settings.

puppetj

@lostless somes they work, sometimes they dont

lostless

@puppetj Are they both wireless?

puppetj

@lostless no only one

puppetj

@dankcushions

ok i did that, i hope it fixes it