gamepad not well working
-
I have got Retropie/Kodi on my Raspberry Pi 4 but, as it has me to configure my gamepad which is a powera Mario. As i configure the buttons, I hold the button like it say to configure but some say, Not Difind- other words, it won't take the button. Is it the gamepad.
-
@raspberry79 Don't HOLD the button, just tap it. If you hold the button it will skip over it.
-
@Thorr69 I have a wire PowerA controllor
-
M mitu moved this topic from General Discussion and Gaming on
-
@Thorr69
I didn't hold them, I did what it tells just bump the buttons, but they won't take. I bought a wired powerA controller from Walmart -
Is the controller working on another system - a PC ? You can test it with something like https://gamepad-tester.com while connected to your PC.
-
@mitu On Retropie, the white screencomes up aksing for gamepad config.
and so i start doing so. I just bump the buttons and on the screen, it will take, but some, i can bump and some still says "Not Defining.
The wire powera gamepad super mario https://www.amazon.com/PowerA-EnWired-Controller-Mario-nintendo-switch/dp/B08F44N24Z/ref=sr_1_52?crid=3GUM83GAOQ11F&keywords=PowerA+Wired+Controller+Mario+Punch+Nintendo+Switch+(NS)&qid=1653292035&sprefix=powera+%2Caps%2C253&sr=8-52 got from Walmart, I noticed later that it has buttons on the backside, one of the buttons in the center is a program button. -
@raspberry79 Yes, we have the idea where the issue appears in the mapping dialog.
What I'm asking if the controller is compatible with a PC, since it's a Nintendo Switch controller and it may not work correctly on a PC. Can you perfom a test as I indicated above ?
-
M mitu referenced this topic on
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.