Pi in a Super Famicom Build
-
@obsidianspider Hahaha, it's pretty cool. Yeah that top image is pixel-perfect 320x240 on the splash screens. Glad you could crop them out.
-
Also, the photos look just fine. It's hard to get a good picture of what's on a little LCD screen. Let me know if you want variations or something else in it. Could put mario behind it or under it or, pfft, whatever. Yoshi. SFC logo
-
@Rookervik Thanks so much for that. I think just one with a transparent background should be good for now. I can see about tweaking a background if necessary once the label arrives.
-
Ok that works. LOL. He's some more fun. Haha.
-
@obsidianspider When you ask for a transparent background, what are you wanting transparent?
-
@Rookervik Keeping the letters colored in, but the background transparent. If that makes sense.
-
-
@obsidianspider Here you go: Template
-
@Rookervik Thanks!
Now I am even more anxious for my label to arrive.
-
My label arrived today, and I have to say, I think it turned out pretty nicely. I decided to go with the blue artwork and aside from my dodgy corners I really like it.
-
@obsidianspider looking sweet! Your idea is genius, the screen is just the perfect height
-
Your builds has given me the push to attempt something like this myself. Your work is amazing.
Thinking of possibly using a psone for my 1st attempt!
-
@danfozzy said in Pi in a Super Famicom Build:
Your builds has given me the push to attempt something like this myself. Your work is amazing.
Thanks. That's quite the compliment. It's been a lot of trial and error.
Thinking of possibly using a psone for my 1st attempt!
Go for it! That would be a really cool build. Be sure to let us know how it goes, and don't be afraid to ask for help if you get stuck.
-
@obsidianspider gone for it. Just bought a psone with a controller for £15 😊
-
@danfozzy said in Pi in a Super Famicom Build:
@obsidianspider gone for it. Just bought a psone with a controller for £15 😊
Fantastic. Some tips: as you take it apart, take a LOT of photos, because you won't always remember how things were connected.
Use plastic bags or containers to store the screws and hardware.
Do a lot of measuring and test fitting BEFORE you cut.
Test, test again, and retest as you go along.
I can't wait to see what you come up with. 🙂
-
@danfozzy is it a psone or a playstation 1? I did a playstation 1 and i can help you out.
-
@OBSIDIANSPIDER Did you ever get that STL file of the Super Famicom backplate made?
-
@elranzer My friend who was helping me, and then moved, has some time now and worked on it in the last few days. It looks promising from the photos, but I haven't seen it in person yet.
-
A Raspberry Pi build is never truly "done" but my Super Famicom build is pretty close to that point.
I met up with my friend and picked up my Super Famicom shell and the part he 3D Printed for me. It's fantastic. Printed in ABS and it fits the Super Famicom like it was from the factory. The Keystone Jacks are right at the top edge of the opening, but that was a design decision based on not wanting to modify the Super Famicom shell. If I wanted to remove the ledge from the inside the ports could be lowered, but I can plug into every port without any strain.
If you want to download the STL, my friend was nice enough to upload it to Thingiverse.
I'm really happy with how things turned out.
It's not easy to take a photo that also shows the cartridge TFT
I hadn't powered the Pi on in a few months, so now it's updating and I still want to make some tweaks to how the TFT works and what the Reset button will control (I went back to just having it turn the screen on and off) but it's finally "complete".
-
@obsidianspider congrats on finally finishing this system. Its got to feel great to finally see this done.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.