Reicast - BIOS not found
-
Here ‘ s what i did:
Latest retropie build 4.8;
Updated retropie script;
Installed Reicast;
Checked BIOS sha according retropie docs;
Put dc_flash.bin and dc_boot.bin in BIOS/dc folder (home and root folders);
Built game list with chd and cdi games;
Configured reicast inputs.Flycast works ok, however it needs a pi4 to run smooth (i have a pi3+).
Any tips?? What more can i do??
-
Can you post a log file from the emulator - get the contents of
/dev/shm/runcommand.log
and post them here between code tags. -
Parameters: Executing: /opt/retropie/emulators/reicast/bin/reicast.sh omx "/home/pi/RetroPie/roms/dreamcast/Super Street Fighter II X.cdi" glGetError 0x500 Compiled Compiled
-
Can you try re-installing
reicast
?I have the same files under
BIOS/dc
and I can run Dreamcast games fine. Did you check if the checksums are correct for the BIOS files ? I tested the SF III 3rd Strike (.gdi
format) and it worked without issues. -
@mitu
I ve tried to reinstall, no sucess...always the same message "BIOS not found".
With daytona usa, soul calibur both .chd, the error persists.dc_boot .bin - e10c53c2f8b90bab96ead2d368858623
dc_flash.bin - 0a93f7940c455905bea6e392dfde92a4BIOS/dc folder (both home and root folders) with this files.
I dont know what to do...
-
The checksums seem ok. Is the message from your
runcommand.log
complete ? When I run a game, I see where the BIOS files is searched and when it's been found:.... Config dir is: /home/pi/.reicast/ Data dir is: /home/pi/.reicast/ Personality: 00800000 Updated personality: 00800000 found libbcm_host rpi2: bcm_init ARM VFP-Run Fast (NFP) enabled ! Linux paging: 4096 00001000 00000FFF Info: nvmem is enabled, with addr space of size 512MB Info: p_sh4rcb: 0x4faf0000 virt_ram_base: 0x53bf0000 Virtual cfg config:homedir=/home/pi Virtual cfg x11:fullscreen=1 Virtual cfg audio:backend=omx Virtual cfg audio:disable=0 Virtual cfg config:image=/home/pi/RetroPie/roms/dreamcast/Street Fighter III - 3rd Strike v1.001 (2000)(Capcom)(US)[!].gdi evdev: Opened device 'PS3 Controller' using custom mapping 'PS3 Controller' EGL config: 0x1, 0x1, 0x1 640x480 OpenGL version: OpenGL ES 2.0 Packed depth/stencil not supported: no modifier volumes when rendering to a texture Screen DPI is 96, size 640 x 480. Scaling by 1.00 Loaded /home/pi/.reicast/data/dc_boot.bin as bootrom ...
What's the output of the command
ls -l $HOME/.reicast/data
-
@mitu said in Reicast - BIOS not found:
ls -l $HOME/.reicast/data
root@retropie:~# ls -l $HOME/.reicast/data total 0 lrwxrwxrwx 1 root root 34 May 10 17:54 dc_boot.bin -> /root/RetroPie/BIOS/dc/dc_boot.bin lrwxrwxrwx 1 root root 35 May 10 17:54 dc_flash.bin -> /root/RetroPie/BIOS/dc/dc_flash.bin
The log is complete....
I ll try to do a nfresh install on another sdcard and try to configure it before any update. -
flashed retropie image from official site, configured keyboard and wifi, installed reicast and put bios on dc/bios (home folder) and...worked!!
Update image doesn´t works a good choice.
Now i ll do it in my main SD card.Thanks anyway!
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.