First boot into command line.
-
I typed in all five commands but nothing happened.
-
@julian2000P Nothing at all. No errors or command not found or bash errors. Literally nothing?
-
after typing in 'sudo apt-get update' some errors occurred
-
@julian2000P Have you downloaded the correct image? i.e. Not the first one for Pi 0 and 1?
-
I'm sorry. You need to be more specific if you want help. I can't drag the information from you. Anyway, good luck. Perhaps someone else with more time and patience will offer assistance.
-
I downloaded it for pi 2/3
-
@julian2000P said in First boot into command line.:
after typing in 'sudo apt-get update' some errors occurred
What errors?
-
@columboscoat thank you anyway
-
at the end it says
some index files failed to download. they have been ignored, or old ones used instead -
@julian2000P What is your power supply?
-
I don't know the brand, but it has a 5 V output and 750mA
-
@julian2000P Then that is your problem. A Pi3 requires 5V@2.5A, you need to check the instructions for the Pi before installing stuff. You might just get away with it on a Pi1 but with stuff connected on a 3, no.
Did you read this:
Please do not post a support request without first reading and following the advice in
https://retropie.org.uk/forum/topic/3/read-this-firstPoint 4 states: If using a Raspberry Pi - make sure you have a sufficient Power Supply / power cable. Many issues are related to having a poor PSU
-
I hope that will fix the problem , thank you
-
@julian2000P Check here https://www.raspberrypi.org/help/faqs/#powerReqs. If it still does not boot, you could have a corrupt card or a faulty card. Try another.
-
I finally got a new power supply, but i have still the same problem. I use a sd-card with 8 gb, is that enough?
-
@julian2000P how many raspberries do you see during boot?
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.