Cast / Mirror the Raspberry Pi Screen on TV

LasagnaDevil

I actually managed to get ZERO lag using android to cast. Now I'll see how to do it from the PC. Also, there are A TON videos of this on the web.

Clyde

@lasagnadevil Care to share how exactly? It might help others with the same problem.

LasagnaDevil

I used this: https://github.com/vincelwt/RaspberryCast

Then again, it does NOT allow for screen mirroring. Merely for a kind-of-cast from Youtube and some other sources.

I found this source but couldn't make it work.

Maybe someone can try it out?

Clyde

@lasagnadevil said in Cast / Mirror the Raspberry Pi Screen on TV:

I used this: https://github.com/vincelwt/RaspberryCast

Thanks.

I found this source but couldn't make it work.

What exactly did not work at what point of the tutorial?

LasagnaDevil

I run the script from Retropie, nothing happens. :(

Clyde

@lasagnadevil So, you downloaded it, made it executable, and executed it like it's shown in the video? Were there any error messages?

edit: If possible, post the commands you entered and any messages that came up here in a codeblock (see this guide how to make a codeblock).

madmodder123

@lasagnadevil Use this: https://www.adafruit.com/product/2881
The 3.5mm jack on the Pi also outputs video, so with the correct cable (not all work) you can use the Pi on an older TV

LasagnaDevil

@madmodder123: that's what I'm using. I intend to mirror my modern PC's content into it.

@clyde: when I run the sh via Retropie, after installing everything, it just exits; no error message to be seen.

Clyde

@lasagnadevil said in Cast / Mirror the Raspberry Pi Screen on TV:

@clyde: when I run the sh via Retropie, after installing everything, it just exits; no error message to be seen.

Alas, that's not enough information to work with. Please list your actions step-by-step and what happened at each step.

jebbett

You could just use a wireless video sender, if you are not using HDMI anyway, these can be had for a tenner off eBay..

Might save you some headaches trying to solve something that looks like it's not possible, and even if it was I expect it would be a significant drain on the CPU of the Pi..