Atari 5200: New version of Atari800 (Beta): two triggers (Moon Patrol!!!), hat start and exit buttons

Used2BeRX

@future.child Already saw it and replied about 3 seconds before you posted here. :)

Awesome work man. I should be able to test it out some time this week.

JLsoft

@future-child
Thanks for your fixes and additions :D

After messing around trying to figure out why Robotron 2084/Space Dungeon dual stick controls weren't working for me (shooting was always aiming northwest, and the config would always write out SDL_JOY_0_SECOND_AXIS_ENABLED=0) with a single gamepad connected to my Pi, I finally worked out that the simplest fix was to change the 2 lines in sdl/input.cthat contain "SDL_JOY_0_SECOND_AXIS_ENABLED" to something else.

I'm guessing that since the option SDL_JOY_0_SECOND_AXIS is a substring of SDL_JOY_0_SECOND_AXIS_ENABLED, that's the reason the segment where SDL_JOY_0_SECOND_AXIS_ENABLED option is read from the config file never actually got called.

future.child

@jlsoft
could you post your config, there may be an issue in there causing it not to work for you with the original code.

It is possible because SDL_JOY_0_SECOND_AXIS is a sub string of SDL_JOY_0_SECOND_AXIS_ENABLED this variable should be placed first, but since the complete string is compared, there should be no problem having it in any other order.

JLsoft

@future-child
The problem/behavior I was getting was that I would set SDL_JOY_0_SECOND_AXIS_ENABLED=1 in the config, run the emulator, it'd have no effect, and then when the emulator wrote the config back out, it'd replace it with SDL_JOY_0_SECOND_AXIS_ENABLED=0.

I don't think anything else in my config would affect that, since it works fine after I only changed the name of that option and made a new build.

SDL_JOY_0_ENABLED=1
SDL_JOY_0_LEFT=7
SDL_JOY_0_RIGHT=5
SDL_JOY_0_UP=4
SDL_JOY_0_DOWN=6
SDL_JOY_0_TRIGGER=16
SDL_JOY_1_ENABLED=0
SDL_JOY_1_LEFT=97
SDL_JOY_1_RIGHT=100
SDL_JOY_1_UP=119
SDL_JOY_1_DOWN=115
SDL_JOY_1_TRIGGER=16
SDL_JOY_0_SELECT=0
SDL_JOY_0_START=3
SDL_JOY_0_TRIGGER1=13
SDL_JOY_0_TRIGGER2=14
SDL_JOY_0_ASTERISK=12
SDL_JOY_0_OPTION=11
SDL_JOY_0_HASH=15
SDL_JOY_0_SECOND_AXIS_ENABLED=1 <= Current build resets this to 0 on exit.
SDL_JOY_0_SECOND_AXIS_INDEX=2
SDL_JOY_0_DIGIT_1=16
SDL_JOY_0_DIGIT_2=16
SDL_JOY_0_DIGIT_3=16
SDL_JOY_0_DIGIT_4=16
SDL_JOY_0_DIGIT_5=16
SDL_JOY_0_DIGIT_6=16
SDL_JOY_0_DIGIT_7=16
SDL_JOY_0_DIGIT_8=16
SDL_JOY_0_DIGIT_9=16
SDL_JOY_0_DIGIT_0=16
SDL_JOY_0_A52_PAUSE=1
SDL_JOY_0_A52_RESET=2
SDL_JOY_0_INDEX=0
SDL_JOY_1_INDEX=1
JOY_SPEED_ADJUST=10
JOY_SPEED_ADJUST=10 <=This line is written twice by sdl/input.c :P
TRUE_ANALOG_JOYSTICK=0

These are Dualshock 3 button numbers. Single controller connected.

future.child

@jlsoft so you changed:
strcmp(option, "SDL_JOY_0_SECOND_AXIS" into strcmp(option, "SDL_JOY_0_SECOND_AXIS_INDEX" and
fp, "SDL_JOY_0_SECOND_AXIS=%d\n"... into fp, "SDL_JOY_0_SECOND_AXIS_INDEX=%d\n"...?

I will update the source and binary, later today, and also fix the JOY_SPEED_ADJUST being written twice.

JLsoft

@future-child
HEH.

Ugh...

(I was about to reply to explain how during my fix attempts, adding _INDEX or adding other stuff onto the end didn't have any effect, and only until I actually changed part of the 'SDL_JOY_0_SECOND_AXIS' part would it work...)*

Okay, so I decided to start from scratch to make sure it was acting the way I was describing...went and changed the source to test, and realized I needed to also change the atari5200.py that auto-maps the RetroArch controls to the atari800.cfg...then noticed line 96:

elif line.startswith("SDL_JOY_0_SECOND_AXIS"):

'startswith'...so SDL_JOY_0_SECOND_AXIS_ENABLED was also getting set to 2 right before the executable ran...and it's looking for 1 or T(rue).

It is really sad how long I spent messing with this last night and looking at the wrong thing :D

So yeah, it's only your copy of the atari5200.py script that needs altered, since currently it'll match SDL_JOY_0_SECOND_AXIS_ENABLED= and make it's value the same as SDL_JOY_0_SECOND_AXIS=.

future.child

@jlsoft Ok, now it makes sense to me.
As i do not use the python script myself, i did not notice anything wrong.
I specify a config file in the emulators.cfg file so i can have different configurations per system/rom where this python script afaik only uses/home/pi/.atari800.cfg.

I will make changes to the python script and fix the JOY_SPEED_ADJUST being written twice.

I think changing elif line.startswith("SDL_JOY_0_SECOND_AXIS") at line 96 to
elif line.startswith("SDL_JOY_0_SECOND_AXIS=") (notice the = sign) should be enough to fix it.

Used2BeRX

@future-child Hey bud.

I still haven't had a chance to check out that new emulator on the two or three games that weren't working right with the other one.

I was wondering though if you'd had an opportunity to look into the other issue with this emulator with the two bugs? I believe at some point you had said you belived that it was due to a difference between the Atari 5200 controller and the Atari 800 keypad, but then you didn't mention anything about it afterward.

I'd like to spend some time getting back to this and wrapping everything up so I could give you the alternate configs for every game that makes the control functions as uniform as possible between all of the games.

future.child

@Used2BeRX
I did spend some time getting the inputs right but so far without success.
To get it right the sdl input should have to be rewritten to use a event driven model instead of a polling model.
The polling it now uses has timing issues causing the misfiring experienced in roms like choplifter.

The input crosstalk is another thing requiring a lot of work.
The original 5200 used multiplexers to select which joystick port places keypad (row/column) data on the bus, as far as i can tell the core does not have this implemented so all incoming data appears to come from all joystickports.

rkoster

Hey @future-child , a quick question related to the 800/XL/XE computers rather than the 5200, if I may... in several games, such as Archon or Bruce Lee, hitting the joy0 button 0 seems to pause the game as well as firing. I found reference online to hitting F7 to toggle "keyboard mode" but that didn't seem to work. I have both keyboard joysticks disabled. Normal pause is supposedly CTRL-1, and I don't understand why J0B0 would be triggering that. Since you've been in the code, any chance you could take a peek at this?

rkoster

Aha, figured it out. If you map the 5200 keypad to button 0, that will be pause on the Atari 800 for some reason. I moved it to J0B1 and now I can fire without pausing.

hansolo77

I'm eager to get Atari 5200 and Atari 800 working better on my system. Is this very hard to setup? The current method (using the one available in the Docs) really kinda sucks.

future.child

@rkoster Good to head it's working.

@hansolo77 once you have the original emulator setup all you have to do is replace the binary in a ssh shell:

cd /opt/retropie/emulators/atari800/bin/
sudo cp atari800 atari800.original
sudo wget https://github.com/futurechild/atari800-rpi/blob/master/atari800?raw=true -O atari800
sudo chmod +x atari800

and adjust the configuration files to suit your needs:

I myself use the following emulators.cfg

atari800

atari800 = "/opt/retropie/emulators/atari800/bin/atari800 -config /opt/retropie/configs/atari800/atari800.cfg %ROM%"
default = "atari800"

atari5200

atari5200="echo %ROM: -\ % > /dev/null;/opt/retropie/emulators/atari800/bin/atari800 -config /opt/retropie/configs/atari5200/atari5200.cfg -cart %ROM%" 
default = "atari5200"
atari800 = "/opt/retropie/emulators/atari800/bin/atari800 %ROM%"

and have the following config files:

atari800.cfg

Atari 800 Emulator, Version 3.1.0
ROM_OS_A_PAL=/home/pi/RetroPie/BIOS/ATARIOSA.ROM
ROM_OS_BB01R2=/home/pi/RetroPie/BIOS/ATARIXL.ROM
ROM_5200=/home/pi/RetroPie/BIOS/5200.ROM
ROM_BASIC_C=/home/pi/RetroPie/BIOS/ATARIBAS.ROM
ROM_400/800_CUSTOM=/home/pi/RetroPie/BIOS/ATARIOSB.ROM
OS_400/800_VERSION=AUTO
OS_XL/XE_VERSION=AUTO
OS_5200_VERSION=AUTO
BASIC_VERSION=AUTO
XEGS_GAME_VERSION=AUTO
ATARI_FILES_DIR=/home/pi/RetroPie/BIOS
HD_READ_ONLY=1
PRINT_COMMAND=lpr %s
SCREEN_REFRESH_RATIO=1
MACHINE_TYPE=Atari XL/XE
RAM_SIZE=64
DEFAULT_TV_MODE=PAL
MOSAIC_RAM_NUM_BANKS=0
AXLON_RAM_NUM_BANKS=0
ENABLE_MAPRAM=1
DISABLE_BASIC=1
ENABLE_SIO_PATCH=1
ENABLE_H_PATCH=1
ENABLE_P_PATCH=1
ENABLE_NEW_POKEY=1
STEREO_POKEY=0
SPEAKER_SOUND=1
BUILTIN_BASIC=1
KEYBOARD_LEDS=0
F_KEYS=0
BUILTIN_GAME=0
KEYBOARD_DETACHED=0
1200XL_JUMPER=0
CFG_SAVE_ON_EXIT=0
CARTRIDGE_TYPE=0
CARTRIDGE_PIGGYBACK_TYPE=0
CARTRIDGE_AUTOREBOOT=1
CASSETTE_LOADED=0
CASSETTE_WRITE_PROTECT=0
RTIME=1
COLOURS_NTSC_SATURATION=0
COLOURS_NTSC_CONTRAST=0
COLOURS_NTSC_BRIGHTNESS=0
COLOURS_NTSC_GAMMA=0.3
COLOURS_NTSC_HUE=0
COLOURS_NTSC_GTIA_DELAY=26.8
COLOURS_NTSC_EXTERNAL_PALETTE_LOADED=0
COLOURS_NTSC_ADJUST_EXTERNAL_PALETTE=0
COLOURS_PAL_SATURATION=0
COLOURS_PAL_CONTRAST=0
COLOURS_PAL_BRIGHTNESS=0
COLOURS_PAL_GAMMA=0.3
COLOURS_PAL_HUE=0
COLOURS_PAL_GTIA_DELAY=23.2
COLOURS_PAL_EXTERNAL_PALETTE=
COLOURS_PAL_EXTERNAL_PALETTE_LOADED=0
COLOURS_PAL_ADJUST_EXTERNAL_PALETTE=0
ARTIFACT_NTSC=NONE
ARTIFACT_PAL=NONE
ARTIFACT_NTSC_MODE=0
SCREEN_SHOW_SPEED=0
SCREEN_SHOW_IO_ACTIVITY=1
SCREEN_SHOW_IO_COUNTER=0
SCREEN_SHOW_1200XL_LEDS=1
SOUND_ENABLED=1
SOUND_RATE=44100
SOUND_BITS=16
SOUND_FRAG_FRAMES=0
SOUND_LATENCY=20
VIDEO_FILTERING=1
VIDEO_ZOOM=1.00
SDL_JOY_0_ENABLED=1
SDL_JOY_0_LEFT=276
SDL_JOY_0_RIGHT=275
SDL_JOY_0_UP=273
SDL_JOY_0_DOWN=274
SDL_JOY_0_TRIGGER=306
SDL_JOY_USE_HAT=1
SDL_JOY_0_SELECT=8
SDL_JOY_0_START=9
SDL_JOY_0_TRIGGER1=1
SDL_JOY_0_TRIGGER2=2
SDL_JOY_0_ASTERISK=0
SDL_JOY_0_HASH=4
SDL_JOY_0_OPTION=5
SDL_JOY_0_SECOND_AXIS=2
SDL_JOY_1_ENABLED=0
SDL_JOY_1_LEFT=97
SDL_JOY_1_RIGHT=100
SDL_JOY_1_UP=119
SDL_JOY_1_DOWN=115
SDL_JOY_1_TRIGGER=306

atari5200.cfg has the following different settings:

MACHINE_TYPE=Atari 5200
RAM_SIZE=16
BUILTIN_BASIC=0

You may want to read this thread trough as there are some interesting posts regarding configuration options and known bugs.

If you run into problems, this forum is a good place to ask for help.

Used2BeRX

@future-child How does the new emulator you ported over handle these issues?

It's been a while now, but I believe that the list of games the two bugs effected was rather small overall. Since I already have all of the controls mapped out on the spreadsheet, I'd just have to figure out how to get them working on the new emulator for the buggy games.

future.child

@used2berx as far as i have tested all controls work as intended in kat5200, even analog.

I think the work you've done with configs is great and could also be used as a template to create controller mappings for other emulators as well, or at least as a lookup table to link roms to desired controller configurations.

GreyRhino

@rkoster , I'm having a similar issue where several of my buttons pause the game in Bruce Lee. I'm using a PS3 controller and the 4 primary action buttons pause the game (but still work as mapped to *, # and punch/kick). I have the option / select working, just cant figure out where you remap the 5200 keypad to something other than button 0. Can you provide some details on that? I've read through the thread and poked around in a few files but am missing something. Your help would be appreciated.

rkoster

@greyrhino My Pi setup is currently disconnected but soon as I reconnect it I will post my config file here.

Used2BeRX

@future-child Cool man. I haven't forgotten about this. I just got pulled way in another direction and then some real life stuff came up the last 3 or so weeks. I should be able to get back to this and give you more feedback soon. :)

zerojay

I created a script to install @future.child's version of atari800 and put it into my repo tonight: https://github.com/zerojay/RetroPie-Extra/blob/master/scriptmodules/emulators/atari800.sh

I'm not using the automatic controller updating script (atari5200.py) because for some reason, I get very strange permissions errors when I use the script to try copying it to the right place and for some reason runcommand can't see the script either.

Used2BeRX

@zerojay Not sure what you mean man. What did you do?

I don't know anything about how repos work.