[gamecon ]SNES Controller via GPIO, define alternative latch/clock pins
-
Hi, I would like to use a SNES controller over GPIO. Unfortunately alot of pins are already taken by my display:
GND Ground
5V 5V Power Supply
GPIO18 Display Backlight, can be set to GPIO12 with Jumper BL
GPIO23 Display Reset
GPIO24 Display Command/Data Select (DC/RS), Jumper IO24-RS
GPIO8 (CE0) Display Chip Select
GPIO7 (CE1) Touchcontroller Chip Select
GPIO25 Touchcontroller Interrupt Output
GPIO9 (MISO) SPI Master-In Slave-Out
GPIO10 (MOSI) SPI Master-Out Slave-In
GPIO11 (SCK) SPI ClockI can detach the touch panel, but I would still lack GPIO23 for latch. Is there any way to reroute it to one of the unoccupied pins? Is it possible to get the driver source anywhere? Maybe I could compile a version with different pin settings.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.