rpie-art: easy way to install art on your RetroPie

[meleu]

@hansolo77 said in rpie-art: easy way to install art on your RetroPie:

I just tried to do the install of this. Followed the instructions in the 1st post. I ran RetroPie-Setup and updated the script (now at 4.2.15). I then existed ES. In the terminal I cloned the repo, then I went into the directory and tried the ./rpie-art.sh --install command. It said this:

chmod: changing permissions of '/home/pi/RetroPie/retropiemenu/rpie-art.sh': Operation not permitted
FAIL: failt to install "rpie-art.sh" on RetroPie Menu.

Not sure what I could have done wrong... don't want to try a sudo ./rpie-art.sh --install until you say to..

Everything is fine with the script. All files/directories under ~/RetroPie/ should be owned by user pi. Are you mounting a non-Linux partition in ~/RetroPie/?

Try sudo chown -R pi:pi /home/pi/RetroPie and then try ./rpie-art.sh --install again (without sudo!).

[hansolo77]

@meleu said in rpie-art: easy way to install art on your RetroPie:

Everything is fine with the script. All files/directories under ~/RetroPie/ should be owned by user pi. Are you mounting a non-Linux partition in ~/RetroPie/?

Try sudo chown -R pi:pi /home/pi/RetroPie and then try ./rpie-art.sh --install again (without sudo!).

Yeah my whole /RetroPie sub-folder is owned by root. I will try this soon as I get a chance.

[hansolo77]

Seems to still be giving me trouble..

chmod: changing permissions of '/home/pi/RetroPie/retropiemenu/rpie-art.sh': Operation not permitted
FAIL: failed to install "rpie-art.sh" on RetroPie Menu.

Prior to cloning from github I did the sudo chown -R pi:pi /home/pi/RetroPie and then ran ls -l /home/pi/RetroPie and saw that ownership was still root:root... not sure what else there is to do....

---

EDIT - Trying something different. I ran a chown --help and read that the -c flag makes it display when a change occurs. So I decided to try and run sudo chown -c -R pi:pi /home/pi/Retropie and have been watching for the last couple of minutes as its displaying changes from root:root to pi:pi

GRR - ls -l /home/pi/RetroPie still shows root:root

---

EDIT - Did a little more research..
https://www.raspberrypi.org/forums/viewtopic.php?f=91&t=40402
I asked google how to change ownership of folders in Raspbian. This led me to a search result "chown not working?". A brief read through had me thinking about fstab. According to that thread, the ownership of the drive is assigned during bootup when the drive is mounted. Since my build uses a USB hard drive, I had an a-ha moment and looked at my own fstab settings. Sure enough, I wasn't assigning a proper username at all, so it was defaulting to root. I took out the bit that said user, and replaced it with uid=pi,gid=pi like it says to use in the RetroPie Docs. That doc must have been updated since I installed all this. When I first started, I didn't know ANYTHING about Linux and everything. So I did this a a complete cut/paste job. Had that info been there, it would have been there now too.

Anyway, I rebooted, exited to terminal, did the ls -l /home/pi/Retropie but and confirmed it now reads as pi:pi for all the folders. I then rand the ./rpie-art.sh --install command and it says SUCCESS. Now I just have to play around with it. :)

---

EDIT - It said SUCCESS, but it didn't install it. Where is it supposed to be? I looked in the RetroPie menu inside ES but it's not there. I also looked inside the RetroPie-Setup menus. Did I miss something?

---

EDIT - I looked at the source for the script and saw what it's basically doing (copying an entry to the script in to the retropiemenu folder) and started thinking "what if it needs to be ran as a root?" So I ran sudo ./rpie-art.sh --install. This was my result:

pi@retropie:~/rpie-art $ sudo ./rpie-art.sh --install
ls: cannot access /root/RetroPie/roms/mame-libretro: No such file or directory
ls: cannot access /root/RetroPie/roms/arcade: No such file or directory
ls: cannot access /root/RetroPie/roms/fba: No such file or directory
ls: cannot access /root/RetroPie/roms/neogeo: No such file or directory
cp: target ‘/root/RetroPie/retropiemenu/’ is not a directory
FAIL: failed to install "rpie-art.sh" on RetroPie Menu.

Just for kicks, I went into the /home/pi/RetroPie/retropiemenu folder and confirmed there IS a file named rpie-art.sh file in there, but the entry just isn't showing up in ES. There is also a gamelist.xml file here, and when I checked it, it does NOT have the rpie-art entry listed... so maybe that's where it's failing, because it's not updating the gamelist?

[hansolo77]

@meleu Did you get a chance yet to read through my (unsuccessful) process above? If you have any suggestions I can try further, let me know!

[meleu]

@hansolo77 said in rpie-art: easy way to install art on your RetroPie:

Just for kicks, I went into the /home/pi/RetroPie/retropiemenu folder and confirmed there IS a file named rpie-art.sh file in there, but the entry just isn't showing up in ES. There is also a gamelist.xml file here, and when I checked it, it does NOT have the rpie-art entry listed... so maybe that's where it's failing, because it's not updating the gamelist?

If it doesn't showing up in ES I suspect it can be related with the "PARSE GAMELIST ONLY" option in EmulationStation "OTHER SETTINGS". It must be turned off.

[hansolo77]

It's not.. Because we were playing with the Mausberry Shutdown Script, I made sure both of those settings were turned on.

[nasp2000]

Great script...

But it is possible to add a generic Arcade overlays for Vertical oriented cabinets ? Overlays for the top and the bottom of the screen only.

[meleu]

@nasp2000 it is an overlay creation task. Once the overlay is ready, the script can install it.

[UDb23]

@nasp2000 what screen resolution would you need ? If your display is vertical why do you have top and bottom bars?

[hansolo77]

@meleu said in rpie-art: easy way to install art on your RetroPie:

If it doesn't showing up in ES I suspect it can be related with the "PARSE GAMELIST ONLY" option in EmulationStation "OTHER SETTINGS". It must be turned off.

"It has to be turned off" I think mine is turned on. I will double check this. I'm not sure what this feature does. If it's OFF, that means it will scan your ROM folders when it's loading right? If that's the case, will it overwrite the existing gamelists? I think that's why I have it turned ON, so it will only use the gamelists created through the scraper. I will have to test this out and see.

[nasp2000]

@udb23 my resolution os 600x1024 a 16/9 ratio and of course i use a ratio define by RetroArch. The image is correct but with small bars top and bottom...

[hansolo77]

@meleu - I tested the turning off "PARSE GAMELIST ONLY" option, and restarted ES. RPIE-ART now shows up on the list. I installed the 16x9 RIP art (ComicBook theme) for all my systems, then restarted ES again. When I tested NES, the artwork displays 4x3, not 16x9. I also noticed my controller was no longer working inside the game. I had to force close it with a keyboard. I'm using a special onstart script before all my games to test the system and load up a custom xbox-drv` for using dedicated system controllers. I think installing the art somehow is overriding and ignoring that script. I tested with MEGADRIVE, and the artwork still displays at 4x3. I also noticed that even by mashing ridiculously fast I couldn't get the run-command dialog menu to display. The controller was working fine for MEGADRIVE, but doesn't work in NES.

I've decided, for the time being, to just uninstall all the art. I might look at this again in the future. I'm on vacation, but I'm sick. Nasty sinus infection. Don't really feel like doing anything. So that's where I'm at..

[UDb23]

@nasp2000 Can you check with RGUI what is the actual game area resolution ? With that info I could create the "generic vertical" overlay.

[nasp2000]

@udb23 Many thanks... i don´t no where to find this info. But i see in RGui/Video/Custom Aspect Ratio H/W are 600x450.

These numeric values are automatic by RetroArch Config, and i choose Core Provided (it is the same that are 3/4 if i choose).

I have a 600x1024 lcd put in vertical with display rotate option in config.txt.

[lilbud]

@meleu I added my overlay repo to the script, could you accept the PR?

[meleu]

@lilbud In order to make your repo "compatible" with rpie-art, you need to use the info.txt files.

More info about it here: https://github.com/meleu/rpie-art/blob/master/INFO.md

It's pretty straight forward and simple. Look at some examples from the @UDb23 's repo. Such as this one for Mega Man.

[lilbud]

@meleu Thats the thing, my overlays are not meant for one system in particular. They were meant for any game on any system. How would I write the info.txt for those?

[meleu]

@lilbud oh... rpie-art can't deal with this situation... Maybe you can, at least, create an info.txt for the Secret of Mana overlay. I believe people only use it when playing on that game on SNES.

[lilbud]

@meleu Like this? https://github.com/lilbud/RetroPie-Overlays/blob/master/Secret of Mana/info.txt

[meleu]

@lilbud yeah, but you also need to provide the ROM configs. Look what @UDb23 made for Mega Man here: https://github.com/UDb23/rpie-ovl/tree/master/nes/Mega Man