PS1 games that have bugs in retropie
-
@dd-indeed said in PS1 games that have bugs in retropie:
So you are running them with stock resolution as well ? I use double resolution/enhanced graphics option to make them more crispy to eyes, so of course I might have some issues with certain games. About the SD card, I remember it being cheaper one, but I used it on a phone previosly and it didn't have any issues with it.
the enhance graphics option and the necessary speed hack option (presumably you have that enabled??) cause many (mostly) minor graphical corruptions: https://retropie.org.uk/docs/Playstation-1/#enhanced-graphics
-
@dd-indeed Yes, the default setting fills the screen up to a full 4:3 ratio right? Otherwise I have expanded the screen size.
-
@bobharris said in PS1 games that have bugs in retropie:
@dd-indeed Yes, the default setting fills the screen up to a full 4:3 ratio right? Otherwise I have expanded the screen size.
no that's different. we're talking about https://retropie.org.uk/docs/Playstation-1/#enhanced-graphics
-
@dankcushions said in PS1 games that have bugs in retropie:
the enhance graphics option and the necessary speed hack option (presumably you have that enabled??) cause many (mostly) minor graphical corruptions: https://retropie.org.uk/docs/Playstation-1/#enhanced-graphics
Yea I use that.
Okay, gotta update the sheet again to include the double resolution note.
So, for sheet users, remember to use this to indicate the double resolution, if you use it:
Double Resolution = DR
-
One thing I started to think about with PS1 games on RetroPie software is that what other video driver plugins are there available right now and what are the ones that are supported ? I read something about Vulcan, that it has more advanced features over the standard GL.
-
@dd-indeed said in PS1 games that have bugs in retropie:
One thing I started to think about with PS1 games on RetroPie software is that what other video driver plugins are there available right now and what are the ones that are supported ? I read something about Vulcan, that it has more advanced features over the standard GL.
pi doesn't support vulcan. you can try dispmanx which has allegedly better input lag, but doesn't support OSD messages, shaders, or rotation.
vulcan wouldn't give any advantage in pcsx_rearmed, but it is better in beetle-psx (which would also need a much better CPU).
-
Allright, I'll try that thanks.
Well I read something, that Vulcan at least on Beetle in PC envirovement has that anti jitter/polygon stabilization feature, that would be more than enough to get over to this system.
-
@dd-indeed said in PS1 games that have bugs in retropie:
Allright, I'll try that thanks.
Well I read something, that Vulcan at least on Beetle in PC envirovement has that anti jitter/polygon stabilization feature, that would be more than enough to get over to this system.
well, 'vulcan' doesn't have that jitter/warping by default - the beetle-psx emulator does, after the code was ported from pcsx_reloaded (if memory serves). i believe it works in GL also, in beetle. however there are some other things that uniquely better in vulcan for that emulator (psx framebuffer effects i think).
in any case, it doesn't help the pi, which is only viable to use with the NEON software plugin and ARM dynarec, both unique to pcsx_rearmed.
-
Ah, I see, learning new stuff every day. Anyway, is that feature going to come over to RetroPie envirovement anytime soon ?
-
@dd-indeed it already is - you can install lr-beetle-psx via retropie, and run it with these features on a compatible PC-type device.
if you're asking will it come to a raspberry pi retropie install? not viable with the current raspberry pi models.
-
@dankcushions said in PS1 games that have bugs in retropie:
if you're asking will it come to a raspberry pi retropie install? not viable with the current raspberry pi models.
So the anti-jitter option is too demanding to be concidered even for RPi 3 ? That's a bummer, I was hoping to see buttersmooth graphics on the PiStation I have.
Another thing, I solved the MediEvil icon issue on the main menu: Double Resolution broke those. Noted it in the sheet, otherwise works perfectly.
-
It seems I can't add a row in the spreadsheet? I wanted to add Agent armstrong.
-
@bobharris said in PS1 games that have bugs in retropie:
It seems I can't add a row in the spreadsheet? I wanted to add Agent armstrong.
Gotta wait till Hurricane sees this, so he can edit it. He's locked out the game list from editing, which is actually good thing, as someone could wipe it out otherwise in worst case scenario.
-
@dd-indeed @BobHarris I've added Agent Armstrong. If you see any other games missing just @ my name and I'll add them.
-
Man it's been demanding job to test the games haha, gotta ease off and play more. So far I've learned these things about the PS1 emulation:
-
Talking about the Double Resolution-option, it causes multiple different kind of issues with games. Mainly it's just very demanding for the whole system and games have some slowdown, audio cuts and jerking, but sometimes the games works really nicely with it and only have some minor graphical glitches, which usually happen with loading screens. I'm not an expert in terms of understanding the development of these things, but I really hope, that some game specific fixes would be introduced at some point or further develope and optimize this feature, as it really makes the PS1 games shine. Some games can be even concidered to look like their PC-port versions, when that feature is enabled.
-
The previous overclocking I had actually had significant impact to the overall performance. As soon as I slightly dropped them down, many games started to have some lag with DR-option Enabled. So to me, RPi 3 is capable of running PS1 games in full speed without any hiccups, if you are using proper cooling system for the RPi due the heavy overclock you have to do. I will improve the cooling of my current system and return back to the original, rather heavy overclock. I had to drop it a bit, as I realized that the whole system runs a bit too hot.
-
About some audio related issues with certain games, I dunno that is it about the audio driver or something else, but sometimes I hear these weird, low quality sounding sounds on the games. They remind me of 8 or 16-bit era sounds in some terms. One example of this can be heard in Crash Bandicoot 3 Warped, on the 4th level, Bone Yard. Walk up to the point, where you do this sort of U-turn and briefly you are in a sidescrolling angle. There is these lava-rivers behind you and their sound effect has this weird low quality crackling-sound. It could be like that by the game's design or something, but I would really wanna know, that do others hear that as well.
-
As for the DR-settings, I noticed, that you need to select the suitable speedhack option for each game, as the speedhack does some weird things sometimes, when it's on or off. Many games tend to have some sort of scaling conflict, especially in pause menus, that causes the backround to go haywire. Demolition Racer's pause menu is a good example of this, when the speedhack is off, there is slight vibration in certain places on the picture, but when putting the speedhack on, the whole screen goes absolutely nuts and is pretty good for getting motion sickness. :P
-
For video driver, I went for SDL Dispmanx over the stock GL. That is one key thing to make the DR-feature work better. Also, some games with stock emulation settings do work better with that as well, so you might wanna try it out, if you see some graphical issues with games.
My soul rests, when I hear the PS1 boot music
-
-
@dd-indeed said in PS1 games that have bugs in retropie:
- The previous overclocking I had actually had significant impact to the overall performance. As soon as I slightly dropped them down, many games started to have some lag with DR-option Enabled. So to me, RPi 3 is capable of running PS1 games in full speed without any hiccups, if you are using proper cooling system for the RPi due the heavy overclock you have to do.
no overclock is required to play psx games at full speed on a pi3. a pi2, even. your configuration is not right.
-
@dd-indeed The "double resolution" thing got me thinking of something else I've discovered that some people may already know but some may not. Using the "Enhanced Resolution (slow)" and the "Enhanced Resolution Speed Hack" functions to increase resolution on lr-pcsx-rearmed seems to make translucent-ish objects become completely invisible. In most cases like MGS using the Stealth Camouflage it doesn't make much of a difference, But in games such as Tomb Raider 1 where the save spots are translucent crystals, it makes it impossible to save in-game. Just something worth noting to those that don't know.
-
@dankcushions said in PS1 games that have bugs in retropie:
@dd-indeed said in PS1 games that have bugs in retropie:
- The previous overclocking I had actually had significant impact to the overall performance. As soon as I slightly dropped them down, many games started to have some lag with DR-option Enabled. So to me, RPi 3 is capable of running PS1 games in full speed without any hiccups, if you are using proper cooling system for the RPi due the heavy overclock you have to do.
no overclock is required to play psx games at full speed on a pi3. a pi2, even. your configuration is not right.
Are you really standing behind your words, that you don't need to overclock RPi 3 in order to run PS1 games in double resolution mode with stable full speed ? I seriosly doubt it.
My soul rests, when I hear the PS1 boot music
-
@aengeon said in PS1 games that have bugs in retropie:
@dd-indeed The "double resolution" thing got me thinking of something else I've discovered that some people may already know but some may not. Using the "Enhanced Resolution (slow)" and the "Enhanced Resolution Speed Hack" functions to increase resolution on lr-pcsx-rearmed seems to make translucent-ish objects become completely invisible. In most cases like MGS using the Stealth Camouflage it doesn't make much of a difference, But in games such as Tomb Raider 1 where the save spots are translucent crystals, it makes it impossible to save in-game. Just something worth noting to those that don't know.
I noticed this issue in Dino Crisis 2, the characters are transparent on cutscenes, if you use DR with Speedhack On. Disabling Speedhack makes them be somewhat blurry.
-
@dd-indeed said in PS1 games that have bugs in retropie:
@dankcushions said in PS1 games that have bugs in retropie:
@dd-indeed said in PS1 games that have bugs in retropie:
- The previous overclocking I had actually had significant impact to the overall performance. As soon as I slightly dropped them down, many games started to have some lag with DR-option Enabled. So to me, RPi 3 is capable of running PS1 games in full speed without any hiccups, if you are using proper cooling system for the RPi due the heavy overclock you have to do.
no overclock is required to play psx games at full speed on a pi3. a pi2, even. your configuration is not right.
Are you really standing behind your words, that you don't need to overclock RPi 3 in order to run PS1 games in double resolution mode with stable full speed ? I seriosly doubt it.
whoops, didn't see you mentioned enhanced resolution before (stop calling it DR!), but even then. you should ALWAYS have the speedhack option enabled when using the ER mode to get proper performance. the pi3 is fine with ER + ER SH. you can sometimes get away without the speedhack, but not often.
the enhanced resolution + speedhack has too many visual bugs for me to consider it more than a curio. things like doom are a mess with it on. i'd prefer a shader. you certainly shouldn't be using it when contributing to compatibility spreadsheets, but there you go.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.