Atari 5200: New version of Atari800 (Beta): two triggers (Moon Patrol!!!), hat start and exit buttons

zerojay

@future-child The script does not create kat5200.db3. When you run kat5200 for the first time, it creates the kat5200.db3 in $home/.kat5200/. It should have no ability to create /etc/kat5200/kat5200.db3 as that directory would be owned by root, not pi and therefore your crashes. This is expected behavior.

I'll wipe out both directories and reinstall and see what it does when I get home tonight.

future.child

@zerojay
I just ran your script after removing both /etc/kat5200/kat5200.db3 and $home/pi/.kat5200/kat5200.db3 and in my case only /etc/kat5200/kat5200.db3 gets created.

afaik /etc/kat5200/kat5200.db3 always gets created during "make install", at least on all installations i have performed so far.

In my script i included "rm /etc/atari5200/atari5200.db3" after which a wget is done for a pre-configured config file (which has the bios path's setup) for this reason.

zerojay

@future-child Alrighty, I'll make that change myself then.

future.child

@zerojay thanks

darknior

I have copy the /etc/kat5200/kat5200.db3 file to /home/pi/.kat5200/kat5200.db3 manually, give it the good PI privileges.
It scanning again 25 min ... and finally i can exit the emulator.
I launch a game with it, RETURN and configure BIOS, GAMEPAD (x360) and USER interface key.
Now it really working fine :)

Mario Bros : detect game and working fine.
Pengo : working fine with same settings
Ms Pacman : WF
Popeye : WF
Star Wars : WF

So excellent :)
Now we have a perfect A800 emulator, and a perfect A5200 emu too :)

To exit i must use XBOX button, but if we can found the solution to use SELECT + START it will be better.
An other problem when we configure JOYSTICK it use real KEY ID and not RETROARCH generic ID like Amy Berry do now too.
If some one other use your settings, or if you have many game pad at home, it is a real problem for direct play :(
I don't know if it can be fixed by shell script, but i think the better solution was if some one know how to modify emulator source code like Amy Berry do.

hansolo77

^_^ Still trying to follow this... if a perfect solution is finally worked out, would somebody be willing to write up a simple step-by-step for me and other users? I've been very busy with work and home life stuff and haven't had much time to sit and play around with figuring new stuff out. I'm eager to A800 and A5200 working better than it is, and this sounds like a good solution.

zerojay

@future-child said in Atari 5200: New version of Atari800 (Beta): two triggers (Moon Patrol!!!), hat start and exit buttons:

rm /etc/atari5200/atari5200.db3

The change is in now.

future.child

@darknior START + SELECT are already hardcoded (controller ID-0, button id's 8 & 9) for emulator exit, this only works if the joystick device is actually being opened (at least one button assigned a function to it).
The KEY-ID is indeed an issue, only way i see around this is to create a update to the database prior to starting the emulator based off retroarch config. This is for the time being beyond me as i still have to delve deeper into the database layout and learn to interact with it, the emulator does seem to allow for sql updates via commandline.

@hansolo77 it's all still experimental but working, eventually i expect the quirks will be gotten rid off and doc's will arrive as well.

@zerojay it works but I'd suggest instead of removing /etc/kat5200/atari5200.db3 to move the file over to $home/pi/.kat5200/ and change ownership to user pi. This because not all tables get recreated and result in strange errors.
Also, as a sidenote, would it not be an idea to create a update section in the menu so the scriptmodules can be updated from within retropie ?

darknior

@future-child said in Atari 5200: New version of Atari800 (Beta): two triggers (Moon Patrol!!!), hat start and exit buttons:

START + SELECT are already hardcoded (controller ID-0, button id's 8 & 9) for emulator exit, this only works if the joystick device is actually being opened (at least one button assigned a function to it).

Do you speak about the A800 emu ? I'm ok for it and it's cool :)
On the A5200 emu it don't work. Or it don't because i change the pad mapping ?

The KEY-ID is indeed an issue, only way i see around this is to create a update to the database prior to starting the emulator based off retroarch config. This is for the time being beyond me as i still have to delve deeper into the database layout and learn to interact with it, the emulator does seem to allow for sql updates via commandline.

Yes it is a problem because you hard code for x360 pad but now i have more 8bitDo controllers, there are really better and perfect for old games. And each of them use different ID :(
The only solution is to update the two emulators source code.
Have you the source code ?

https://github.com/gabomdq/SDL_GameControllerDB

This library permit to an emulator to works fine with all the controllers we want. like Retroarch do <3
And the Joystick database is easier to update. PPSSPP use this library i think because i have add it my x360 Apator Receiver ID
If we add this options to these two emulators there are already perfect. Working fine 100%.
Maybe they they also miss Borders like on Retroarch :p

it works but I'd suggest instead of removing /etc/kat5200/atari5200.db3 to move the file over to $home/pi/.kat5200/ and change ownership to user pi. This because not all tables get recreated and result in strange errors.

It's what i do, and i think it's the best solution.

Also, as a sidenote, would it not be an idea to create a update section in the menu so the scriptmodules can be updated from within retropie ?

For sure, for some emulators or games in retropie Setup it can be really cool to alone update settings and not install again all the emulator :(
Here it can help, when we already install it, to update alone the BDD and other settings file.

zerojay

@future-child said in Atari 5200: New version of Atari800 (Beta): two triggers (Moon Patrol!!!), hat start and exit buttons:

@zerojay it works but I'd suggest instead of removing /etc/kat5200/atari5200.db3 to move the file over to $home/pi/.kat5200/ and change ownership to user pi. This because not all tables get recreated and result in strange errors.
Also, as a sidenote, would it not be an idea to create a update section in the menu so the scriptmodules can be updated from within retropie ?

I'll do that, but that also sounds like an upstream bug that should be reported.
Done: https://github.com/zerojay/RetroPie-Extra/commit/7328c1d00514cdeb33678f8e233f8d662d8f2bb0

zerojay

@future-child said in Atari 5200: New version of Atari800 (Beta): two triggers (Moon Patrol!!!), hat start and exit buttons:

Also, as a sidenote, would it not be an idea to create a update section in the menu so the scriptmodules can be updated from within retropie ?

https://github.com/zerojay/RetroPie-Extra/issues/243

future.child

@darknior said in Atari 5200: New version of Atari800 (Beta): two triggers (Moon Patrol!!!), hat start and exit buttons:

@future-child said in Atari 5200: New version of Atari800 (Beta): two triggers (Moon Patrol!!!), hat start and exit buttons:

START + SELECT are already hardcoded (controller ID-0, button id's 8 & 9) for emulator exit, this only works if the joystick device is actually being opened (at least one button assigned a function to it).

Do you speak about the A800 emu ? I'm ok for it and it's cool :)
On the A5200 emu it don't work. Or it don't because i change the pad mapping ?

It's hardcoded in both Atari800 and Kat5200, altough kat5200 only works for controller id-0 and when this controller has been assigned a function to it (unless it's assigned as input in the configuration it all keypresses are ignored).

The KEY-ID is indeed an issue, only way i see around this is to create a update to the database prior to starting the emulator based off retroarch config. This is for the time being beyond me as i still have to delve deeper into the database layout and learn to interact with it, the emulator does seem to allow for sql updates via commandline.

Yes it is a problem because you hard code for x360 pad but now i have more 8bitDo controllers, there are really better and perfect for old games. And each of them use different ID :(
The only solution is to update the two emulators source code.
Have you the source code ?

The source code for Atari800 is located here.
The source code for Kat5200 is located here.
The source code for Kat5200 does get adjusted by my script as follows:

sed -i -e '230d' /tmp/src/interface/ui.c
sed -i '1221 a\
        if ((SDL_JoystickGetButton(g_pc_joy[0].joy_ptr,8) == SDL_PRESSED) && (SDL_JoystickGetButton(g_pc_joy[0].joy_ptr,9) == SDL_PRESSED))

https://github.com/gabomdq/SDL_GameControllerDB

This library permit to an emulator to works fine with all the controllers we want. like Retroarch do <3
And the Joystick database is easier to update. PPSSPP use this library i think because i have add it my x360 Apator Receiver ID
If we add this options to these two emulators there are already perfect. Working fine 100%.
Maybe they they also miss Borders like on Retroarch :p

Both Atari800 and Kat5200 use SDL for joystick support, i'm not sure if changing libraries is feasable, but you're welcome to try.
Edit: I see it's not a replacement for SDL but a sort of lookup table, i'll look in to it.

it works but I'd suggest instead of removing /etc/kat5200/atari5200.db3 to move the file over to $home/pi/.kat5200/ and change ownership to user pi. This because not all tables get recreated and result in strange errors.

It's what i do, and i think it's the best solution.

Also, as a sidenote, would it not be an idea to create a update section in the menu so the scriptmodules can be updated from within retropie ?

For sure, for some emulators or games in retropie Setup it can be really cool to alone update settings and not install again all the emulator :(
Here it can help, when we already install it, to update alone the BDD and other settings file.

future.child

@zerojay said in Atari 5200: New version of Atari800 (Beta): two triggers (Moon Patrol!!!), hat start and exit buttons:

@future-child said in Atari 5200: New version of Atari800 (Beta): two triggers (Moon Patrol!!!), hat start and exit buttons:

@zerojay it works but I'd suggest instead of removing /etc/kat5200/atari5200.db3 to move the file over to $home/pi/.kat5200/ and change ownership to user pi. This because not all tables get recreated and result in strange errors.
Also, as a sidenote, would it not be an idea to create a update section in the menu so the scriptmodules can be updated from within retropie ?

I'll do that, but that also sounds like an upstream bug that should be reported.
Done: https://github.com/zerojay/RetroPie-Extra/commit/7328c1d00514cdeb33678f8e233f8d662d8f2bb0

Thanks, for so far i have tested i found no other problems.
I do believe the author intended for the database to be moved as it comes pre configured with a lot of data (settings based on rom-crc, input keycodes etc), so i think a bug report is not needed but will add it to the list of questions i am preparing.

darknior

WOAW lr-a800 is out :D
I have try some A800 games and A5200 and they works fine :)
With all the cool Retroach feature ;)
But for the moment i have a strange bug, the image has like a white filter. Not really beautiful :(

future.child

@darknior Where is it ?

Edit: the white filter over your image sounds like the gamma is set too high.
Edit2: found it... but what makes this one (asside it being built as a single binary libretro core) differ from the one already available in scriptmodules/emulators ?

darknior

@future-child said in Atari 5200: New version of Atari800 (Beta): two triggers (Moon Patrol!!!), hat start and exit buttons:

Edit: the white filter over your image sounds like the gamma is set too high.

But where do you change it ? i don't found the option :(

Edit2: found it... but what makes this one (asside it being built as a single binary libretro core) differ from the one already available in scriptmodules/emulators ?

I don't know or understand what about you speak ?
I don't have any A800/5200 emulator in retroarch before.
But is it work fine with good gamma it let us use Boder, Joypad RA Mapping, Savestate, and maybe Fast and rewind ... i don't take time to try it many more ...

future.child

@darknior said in Atari 5200: New version of Atari800 (Beta): two triggers (Moon Patrol!!!), hat start and exit buttons:

@future-child said in Atari 5200: New version of Atari800 (Beta): two triggers (Moon Patrol!!!), hat start and exit buttons:

Edit: the white filter over your image sounds like the gamma is set too high.

But where do you change it ? i don't found the option :(

In the config file is a entry to adjust gamma COLOURS_PAL_GAMMA=0.3 and COLOURS_NTSC_GAMMA=0.3.
See this link.

Edit2: found it... but what makes this one (asside it being built as a single binary libretro core) differ from the one already available in scriptmodules/emulators ?

I don't know or understand what about you speak ?
I don't have any A800/5200 emulator in retroarch before.

It was available as a retropie optional install (see above link).

But is it work fine with good gamma it let us use Boder, Joypad RA Mapping, Savestate, and maybe Fast and rewind ... i don't take time to try it many more ...

This is new then, the normal Atari800 did not have (all of) this.
I'll do an install just for the fun of it and see what's what.

darknior

@future-child said in Atari 5200: New version of Atari800 (Beta): two triggers (Moon Patrol!!!), hat start and exit buttons:

In the config file is a entry to adjust gamma COLOURS_PAL_GAMMA=0.3 and COLOURS_NTSC_GAMMA=0.3.
See this link.

You're not understand me. I don't have any problem with Atari800 emu.
From the beginning i speak about the LIB RETRO ATARI 800 v3.1.0 emu, available from yesterday.

https://github.com/r-type/libretro-atari800
from
https://atari800.github.io/index.html
https://github.com/atari800/atari800

Like i don't found any think to fix GAMMA problem i try to use shader, it's only a proof of concept, because i never work on shader, but i can change GAMMA with it ... maybe it is the solution for us. You can try it as exemple ...

Create and use crt-gamma-pi.glclp

shaders = "1"
shader0 = "shaders/crt-pi.glsl"
filter_linear0 = "true"
wrap_mode0 = "clamp_to_border"
mipmap_input0 = "false"
alias0 = ""
float_framebuffer0 = "false"
srgb_framebuffer0 = "false"
parameters = "MASK_BRIGHTNESS;BLOOM_FACTOR;INPUT_GAMMA;OUTPUT_GAMMA"
MASK_BRIGHTNESS = "0.700000"
BLOOM_FACTOR = "0.300000"
INPUT_GAMMA = "2.400000"
OUTPUT_GAMMA = "1.200000"

future.child

@darknior said in Atari 5200: New version of Atari800 (Beta): two triggers (Moon Patrol!!!), hat start and exit buttons:

You're not understand me. I don't have any problem with Atari800 emu.
From the beginning i speak about the LIB RETRO ATARI 800 v3.1.0 emu, available from yesterday.
https://github.com/r-type/libretro-atari800

I think i do understand, this lib retro atari 800 v3.1.0 is a repackaged (port) version of the original Atari800 emulator.
It still functions in the same way as the original does, using a config file, cmd options, gui or keyboard shortcuts.
Try pressing F1 on your keyboard, it should show you the menu where you also can change gamma.

darknior

@future-child said in Atari 5200: New version of Atari800 (Beta): two triggers (Moon Patrol!!!), hat start and exit buttons:

Try pressing F1 on your keyboard, it should show you the menu where you also can change gamma.

Really really strange ... it is not in the RA philosophy ... maybe because the port is not done ...
All the F1 options must move to the RA CORE options.

I have try and my Keyboard and Joystick move to fast in the menu :(
And i don't found the GAMMA option in th menu.
And i don't found the CFG file on the PI, i don't know where is it saved to modify it manually.
I think you know this emulator better than me.