Full Size Arcade Build - DC Vs Marvel

lilbud

Might I just say, Suzo Happ are also very good. I wanted to use Sanwa, but they wouldn't snap into my wooden control panel. Suzo buttons are very responsive in the 2 sticks I used.

FlyingTomahawk

@lilbud said in Full Size Arcade Build - DC Vs Marvel:

but they wouldn't snap

Not all buttons are snap in type. Seimitsu (PS-14-GN) and Sanwa (OBSN-30) have screw type buttons exactly for such cases.

vaportrail

@alturis
Haha well done on the new high score!

@Clyde
Absolutely would appreciate some feedback once you get some playtime on the new Joysticks

@FlyingTomahawk
I’m definitely leaning towards the Sanwa Joys, unfortunately my simple brain is attracted to shiny bright objects...so it might be tough going with non LED buttons! :)

@lilbud @FlyingTomahawk
I looked on Paradise and at least initially all I could find were the snap ins, I’ll have to go look again. I know on the Bartop the precut button holes were quite a bit bigger than the buttons I dropped in. So I would think because of the diameter of the hole and thickness of the MDF, they would have to be threaded. Looks like I have some measuring and learning to do!

lilbud

@vaportrail I get everything from this site: https://www.focusattack.com/

Also, I'd recommend screw in buttons. They might wake the neighbors but they are good quality.

barrymossel

These are very light as well: https://paradisearcadeshop.com/microswitches/36-rollie-leaf-switch-for-pushbutton.html

Clyde

@Alturis Thanks for the buttons review. Now I have to look for a vendor in Europe who delivers them to Germany. :)

@barrymossel Do you have first-hand experience with the leaf switches? If so, care to share them with us?

@FlyingTomahawk Why exactly are Seimitsu sticks supposed to be better for shoot em ups?

@alturis @vaportrail My first impressions of the Mag-Stik Plus:

Pros:

good, sturdy worksmanship
quick responses, very short actuation travel (If you like that.)
The 4/8-way switching by pulling the stick up and turning it works fine – if you reassemble the stick precisely (see below).
The connector pins are slightly smaller than those of my Zippyy sticks, making (dis-)connecting the wires less painful for my fingers. :)

Cons:

very short actuation travel (If you don't like that.)
Strong centering power that requires a certain strength to move the stick and may fatigue your hands after some time. The leverage of the relatively long bat top compensates for that to some extend, so it may just be a matter of playing technique. If that's your only gripe about the Mag-Stik, see these instructions to lessen the magnetic pull.
Shorter mounting plate than Zippyy (and Sanwa I think), that's incompatible with the holes in my control panel. I didn't know that these holes aren't standardised, now I do. :P For the time being, two of four screws hold the Mag-Stiks firmly enough, but I may have to purchase an adapter plate if I decide to keep them. You can see the exact dimensions in the mounting diagrams on the Ultimarc website.
If the joystick holes in your CP aren't big enough to let the ball top through, you'll have to dismantle the 4/8-way switching mechanism on the shaft and remove the shaft completely. The mounting diagrams also show the assembling order of all the parts.
At first, I seem to have made a miniscule discrepancy in reassembling the stick, resulting in unreliable way switching and occational unresponsiveness in certain directions. After dismantling and reassembling the stick once more, both issues seem to have disappeared. So, a certain minimum of manual skills and dilligence is advisable.

All in all, I can recommend the Mag-Stik Plus if you're aware of the issues above. I tested them in fighting games, shoot em ups, and labyrinth games (pac man etc.) In my web research about these sticks, I found this video that compares many common arcade joysticks including Zippyy, Sanwa and the Mag-Stik:

The reviewer notes that you might only need one Mag Stik Plus because 4-way games tend to have alternating 2-player modes that use only one stick for both players (except for cocktail cabinets). Its little sibling, the normal Mag-Stik without the Plus and "only" with a 4/8-way switch underneath its mounting plate is significantly cheaper and may suffice as the second joystick, as would any other 8-way joystick if you don't mind the more or less different design.

Having said all that, I also ordered two Sanwa JLF-TP-8YT-SK joysticks for comparison and as potential replacements for the built-in sticks of my two standalone Mayflash Arcade Fighting sticks. In a way, I have tasted blood in this matter. ;)

Alturis

@clyde said in Full Size Arcade Build - DC Vs Marvel:

I also ordered two Sanwa JLF-TP-8YT-SK

I got two of those as well. Then the clickiness of the stick actuation bugged me too. I highly recommend these upgrades :
https://paradisearcadeshop.com/levers-sanwa/1636-sanwa-jlf-tprg-8ayt-sk-silent-joystick-kit.html

Or for someone buying new sticks:
https://paradisearcadeshop.com/levers-sanwa/1456-sanwa-jlf-tprg-8ayt-sk-silent-joystick.html

Clyde

@alturis Yeah, I saw these too and watched a video that demonstrated their noise reduction. But their price doesn't fit the low level of annoyance the clicks pose to me. ;)

FlyingTomahawk

@clyde

Search google for "Sanwa vs Seimitsu sticks" or "JLF vs LS-32" and read the comments people give.
Most say that the Seimitsu is the stick to go for Schmups games. And the JLF stick is more for fighting games. True or not? Don't know, maybe more of a preference thing?

I own both and from my experience I can say the Seimitsu has smaller dead zones, is a bit stiffer, stick returns faster to center.
You can however modify any stick for example by adding stiffer springs inside.

I personally prefer my Seimitsu arcade stick for Schmups games and the Sanwa stick for fighting games.

Clyde

@flyingtomahawk Thanks, I'll soon see how the Sanwa positions itself between my Zippyy and Ultimarc sticks in that regard. Comparing the latter two, I can already see why people like to use stiffer sticks with smaller dead zones for fighting games.

FlyingTomahawk

@clyde

Please keep us updated on your findings.
Maybe in a separate topic? So that we can avoid cluttering up this topic here.
Would make for a nice conversation, the stick stuff I mean.

Clyde

@flyingtomahawk Good idea! Done.

BaviaanNL

Interesting reading your opinions of the Mag Stick Pro's.

I had 2 arrive today although haven't had a chance to install to my cab yet (job for tomorrow)

My first observation regarding the lift and twist mechanism to switch between 4 or 8 position is that the lift isn't necessary, I seem to be able to simply twist in order to achieve the task, is it the same with yours?

Not a massive issue as twisting the stick isn't necessary, just curious as to why the lift isn't necessary on these sticks.

Clyde

@baviaannl I replied to your question in my joystick thread that I linked above to avoid the off-topic talk here. I hope that's okay for you. O:)

barrymossel

@clyde said in Full Size Arcade Build - DC Vs Marvel:

@barrymossel Do you have first-hand experience with the leaf switches? If so, care to share them with us?

I have bought them and they feel pretty light. Didn't play with them though (as I am currently in the "gathering phase" for my cabinet. But to me they feel a lot better than normal micro switches. But that might also depend on the buttons you use (I have IL concave buttons).
Most of the people have good experience with them I believe.

vaportrail

Sorry guys haven't been able to respond to all the great info, just got back from Disneyland.

I consider myself to be a beginner in all of this and feel like my eyes have really been opened with whats been presented on joysticks, so thanks for all that!

@Clyde
Thanks for posting that video. When I first saw how long it was, I didn't think I could sit through 30+ minutes of joystick "talk", but I made it. Very informative!

Clyde

@barrymossel Thanks for your report about the leaf switches. Since I ultimately want illuminated buttons, I found these buttons with gold-plated leaf switches and no springs, so that they are said to have "a unique low actuation force for the entire button". I plan to order them this weekend and I will report about them over in my open joystick thread, because I think that buttons are sufficiently related to joysticks in that regard. (In my mind, they're their little minions. :D )

@vaportrail Hey, I hope you had a nice trip. :) I'm glad you liked the video. Yeah, it is long but it gives a very good overview of many popular models, and it lets you skip to a particular model easily, since the camera remains at a long shot the whole time. I'm also new in this, since I only got into arcade joysticks this winter because of my DIY upright cabinet.

vaportrail

Update: Got the 32" Arcade Kit in last Monday. Was able to shoot an unboxing video so here you go! Build video to follow hopefully this week!

Clyde

@vaportrail Very nice! I'm curious how it'll look when assembled.

HurricaneFan

@vaportrail That artwork looks gorgeous! Excited to see the final product.