Input Lag guide

Rion

thanks!

@sirhenrythe5th said in Input Lag guide:

Personelly i would recommend using a CRT.
No tweaks, parameters or tools gave me this experience, totally awesome.

I am not 100% sure on CRT - I realise CRTs themselves have no 'post processing', but I believe digital-to-analogue conversion between pi and composite output adds some latency(?). I also heard that doing it via the GPIO might be quicker(?) - eg http://www.rgb-pi.com/.

As far as I know there should be no input lag when using the GPIO. Rgb-pi is not the best product out there so I would highly recommend RetroThink over Rgb-pi or pi2scart.

@mikechi2 could explain this better for you.

Ps I would also recommend to read @Brunnis thread over at the Libretro forums. An input lag investigation

Capeman

@dankcushions You wrote DISPMANX as a do-not-use, but if it cuts lag with only the side effects you listed, this actually sounds like a good option for one of my boxes that only runs console games with no rotation, always turn off the OSD and never uses shaders.

Can you offer any insight as to any other side effects, because from what you wrote, i feel like i want to turn this on, haha!

pjft

@dankcushions thanks for putting this together. A few weeks ago there was a thread about improving Bluetooth controller lag, which included disabling wifi and potentially making it slave rather than master.

I tried it out and the ping results for the Bluetooth connection certainly improved. Unsure if that's something you'd want to include, but wanted to mention it.

Here it is in case you'd want to use any of it:

https://retropie.org.uk/forum/topic/7712/fixing-dualshock-3-bluetooth-lag/27

Thanks for documenting this.

mediamogul

@dankcushions said in Input Lag guide:

it's possible that you can enable some or even all of these tweaks for certain emulators/games and have no adverse effects. my problem with them is that retropie on a raspberry pi 3 has very little headroom.

I reworked the wiki entry to reflect this and added a real world use case of NES-specific titles with a solution that shouldn't affect performance. I also changed 'Dangerous Tweaks' to 'Cautionary Tweaks' to prevent users from potentially mistaking the warning for something that might irreparably damage their setup. Finally, I added a graph that reflects the potential benefits of the settings when applicable. I was mindful as I went along to add that these settings are always conditional.

dankcushions

@mediamogul said in Input Lag guide:

@dankcushions said in Input Lag guide:

it's possible that you can enable some or even all of these tweaks for certain emulators/games and have no adverse effects. my problem with them is that retropie on a raspberry pi 3 has very little headroom.

I reworked the wiki entry to reflect this and added a real world use case of NES-specific titles with a solution that shouldn't affect performance. I also changed 'Dangerous Tweaks' to 'Cautionary Tweaks' to prevent users from potentially mistaking the warning for something that might irreparably damage their setup. Finally, I added a graph that reflects the potential benefits of the settings when applicable. I was mindful as I went along to add that these settings are always conditional.

i don't like 'cautionary tweaks' as it now implies that we endorse them, even tacitly. that is the opposite of my intention in documenting them. i don't think anyone should use these tweaks under any circumstances. if they do use them, they are now using their own version of retropie and should ask themselves for help from now on :)

for example, those settings will get you lost frames when you use even the light crt-pi, etc shaders we suggest elsewhere in the wiki. likely same with overlays. what about with bluetooth, or wifi, or anything else that puts (slight) added load to the CPU/bus?

this is the kind of thing i wouldn't feel confident endorsing without a full test using a benchmarking suite: https://github.com/dankcushions/retropie-auto-testing (which i must finish... someday!).

mediamogul

@dankcushions said in Input Lag guide:

i don't like 'cautionary tweaks' as it now implies that we endorse them, even tacitly. that is the opposite of my intention in documenting them. i don't think anyone should use these tweaks under any circumstances. if they do use them, they are now using their own version of retropie and should ask themselves for help from now on :)

Maybe I'm underestimating the situation, but surely these settings don't qualify as being particularly dangerous do they? I mean, they're not really anywhere near the level of caution that should be observed from an overclock and we support those users who have chosen to do so. Granted, if they come here with troubles related to overclocking we should always recommend they be adjusted, or abandoned outright, but I've never seen it as being grounds to prohibit support altogether.

for example, those settings will get you lost frames when you use even the light crt-pi, etc shaders we suggest elsewhere in the wiki.

I had first posted about Brunnis' initial findings regarding limited shader impact, but missed where he has since rethought the issue. Still, with dispmax enabled, shaders aren't going to be an issue, as they aren't supported with that particular driver. Also, the worst that can happen if performance is affected by shaders is that the user has to make a decision whether input lag, or visual presentation is more important to them. Personally, I prefer to prioritize how a game plays, but each user is going to be different. Allowing a choice here would seem ideal.

what about with bluetooth, or wifi, or anything else that puts (slight) added load to the CPU/bus?

I make use of both and have been actively testing the NES-specific settings I posted on the wiki for several months and I've never dipped below 60fps on a Pi 3.

dankcushions

@mediamogul said in Input Lag guide:

@dankcushions said in Input Lag guide:

i don't like 'cautionary tweaks' as it now implies that we endorse them, even tacitly. that is the opposite of my intention in documenting them. i don't think anyone should use these tweaks under any circumstances. if they do use them, they are now using their own version of retropie and should ask themselves for help from now on :)

Maybe I'm underestimating the situation, but surely these settings don't qualify as being particularly dangerous do they? I mean, they're not really anywhere near the level of caution that should be observed from an overclock and we support those users who have chosen to do so.

perhaps “dangerous” is the wrong word. a moderate overclock can provide a totally safe global benefit (typically invisible but anyway). even an extreme/unsafe overclock cannot damage your system (pi will downclock, etc) so is not “dangerous”.

none of these tweaks can give a wholesale global benefit - they all have a performance cost which will cause a subset of games to drop frames.

i don’t know of a better way of heading that section.

Granted, if they come here with troubles related to overclocking we should always recommend they be adjusted, or abandoned outright, but I've never seen it as being grounds to prohibit support altogether.

i guess i have been doing the support dance for a while now and i find overclocking and input tweaks to be the most tedious to support. they are blindly added and presumed safe, so hard to diagnose. i really like having a link i can just paste in that broadly says “here’s why you messed up”. i think now the link says “here, let us help you mess up” :)

for example, those settings will get you lost frames when you use even the light crt-pi, etc shaders we suggest elsewhere in the wiki.

I had first posted about Brunnis' initial findings regarding limited shader impact, but missed where he has since rethought the issue. Still, with dispmax enabled, shaders aren't going to be an issue, as they aren't supported with that particular driver. Also, the worst that can happen if performance is affected by shaders is that the user has to make a decision whether input lag, or visual presentation is more important to them. Personally, I prefer to prioritize how authentically a game plays, but each user is going to be different. Allowing a choice here would seem ideal.

i don’t think the typical user will connect the dots. same with overclocking. our wiki pages on overclocking/n64 tweaks are a weapon as far as i’m concerned. the benefit is approaching zero, yet the crashing threads are legion.

what about with bluetooth, or wifi, or anything else that puts (slight) added load to the CPU/bus?

I make use of both and have been actively testing the NES-specific settings I posted on the wiki for several months and I've never dipped below 60fps.

are you sure? because it can be subtle. the clouds during motion in mario is a good test. i need to get the benchmarking suite done...

if we’re confident that the settings are safe for pi3 + nes, then they should be defaulted for pi3 + nes (not dispmanx), right? we all run the same hardware.

mediamogul

@dankcushions

You make strong points and beyond anything else, you're the original author of the article. I was hoping that by reworking it, we might open up a few advantages to those extra difficult games that need tighter input timing, but it may very well be that no matter how it's worded, users will apply them without care. I certainly don't want to make support any more difficult and I completely understand that it might. I'm about to sit down to eat, but I'll look into reverting the changes later this evening.

Darksavior

Maybe change it to unsupported tweaks or have the word "unsupported" mentioned in there.

herb_fargus

I think generally over clock/input lag are "advanced user" stuff. That's kinda why I put them in that section(or thought i did) in the wiki. Fact is people are trying to use an underpowered device to do things it's not really meant to do and then wonder why it sploded. I'm personally fine with a giant disclaimer on both pages saying : UNSTABLE: ADVANCED USERS ONLY! then in fine print: if you break it don't come the forum- just reimage and stop while you're ahead ;)

mediamogul

@herb_fargus said in Input Lag guide:

I'm personally fine with a giant disclaimer on both pages saying : UNSTABLE: ADVANCED USERS ONLY!

I'm fine with disclaimers as well, but shouldn't they read as being 'potentially unstable', given that they're also potentially stable under the right circumstances? Something akin to @Darksavior's suggestion of labeling the tweaks as simply being unsupported would remain neutral to the potential outcome, no matter what.

lilbud

@mediamogul I personally think the potentially unstable tweaks shouldn't even be on the page in the first place. Because Gods perfect idiot will come along, screw up their build using settings from the do not use section, then come to the forum kicking and screaming about how their build is screwed.

But, ya know, just my silly personal opinion.

mediamogul

@lilbud

That is one way to go. I mean, there are a few suggestions for reducing input lag listed above that are guaranteed not to cause trouble. Although games like 'Battletoads' and 'Mike Tyson's Punch-Out!!' become considerably easier with the adjustments, I'm fairly confident both games could be beaten without them given some extra practice and memorization. In fact, outside of those two examples and perhaps a few more, there's really no other situations where this is even an issue.

markwkidd

Have you all been tracking the new run-ahead lag reducer function for libretro/RetroArch cores that just debuted around the beginning of the month?

My understanding is that it should be able to shave a frame or two off of the lag for older console emulators even with low-power architectures like rpi.

mediamogul

@markwkidd said in Input Lag guide:

Have you all been tracking the new run-ahead lag reducer function

I have to say I have not, but it sounds like the cat's pajamas. I take it that this is it in action?

markwkidd

That's the very one!

caver01

@markwkidd And this wasn't an April Fool's joke?

markwkidd

@caver01 said in Input Lag guide:

@markwkidd And this wasn't an April Fool's joke?

nope, it's real. this functionality is IMO a landmark in emulation but it happened so recently that history hasn't quite noticed yet

there has been quite a bit of testing. there are likely some bugs still to be found but I think things are reasonably proven in terms of the major classic consoles and the higher performance libretro emulators for NES/Famicom, Genesis/Megadrive, SNES/Super Famicom

markwkidd

The new stable release of RetroArch 1.7.2 has been pending for weeks now because all of these major new features have hit and are still getting little bugfixes

Wait till you see what is about to hit in 1.7.3 in terms of native CRT support in RetroArch

pjft

@markwkidd I struggle to imagine that the look ahead frame improvements on RetroArch will work on the pi, as it has a non-negligible load on the CPU. But I have no facts to base that assumption on, it's just from reading the original technical release.