need help getting after glow xbox one wired controller to work on retropie
-
Does the controller configure ok in EmulationStation initially? Can you navigate the ES menus
?To help us help you - please make sure you read the sticky topics before posting - https://retropie.org.uk/forum/topic/3/read-this-first
-
@buzz no after i updated every thing and use my key bored to go input the controls for the controller, it tells me to press a on the controller but it wont do anything, i cant config the key binds or anything, it says its supported so idk whats going on
-
@BuZz ok so when starting the system when it loads, every thing says [ OK ] but it says [ failed ] to start load Kernel Modules. see 'systemctl status systemd-modules-load.services' foe details
-
@cynital and what's the output of that command if you type it in?
To help us help you - please make sure you read the sticky topics before posting - https://retropie.org.uk/forum/topic/3/read-this-first
-
@cynital A normal phone charger is not an appropriate power source for a Raspberry PI. Please use a proper power adapter to power up your system.
-
@buzz that the module failed ill take a screen shot later but do you have any idea or fix
-
@mitu ok whats a proper power supply?
-
@mitu Ah I didn't notice that - yeah could be power related.
To help us help you - please make sure you read the sticky topics before posting - https://retropie.org.uk/forum/topic/3/read-this-first
-
@cynital https://retropie.org.uk/docs/Overclocking/#power-supply & https://www.raspberrypi.org/documentation/hardware/raspberrypi/power/README.md
To help us help you - please make sure you read the sticky topics before posting - https://retropie.org.uk/forum/topic/3/read-this-first
-
@buzz is this ok? https://www.amazon.com/Black-Mini-Portable-Charger-Built/dp/B0742NFM65/ref=mp_s_a_1_6?ie=UTF8&qid=1529881809&sr=8-6&pi=AC_SX236_SY340_QL65&keywords=pocket+juice&dpPl=1&dpID=31-lL4sd5qL&ref=plSrch im going to use it to make the pi portable so i could use it for now
-
@buzz also if its not power related could it be something else or would you have to see the screenshot
-
@cynital That may well not be suitable. I recommend getting a proper/official PSU to rule out power issues.
To help us help you - please make sure you read the sticky topics before posting - https://retropie.org.uk/forum/topic/3/read-this-first
-
@cynital I would prefer you to copy and paste the output rather than doing a screenshot. Please see the SSH section of the documentation. You can remotely connect to the RPI to get to a terminal to type the commands.
To help us help you - please make sure you read the sticky topics before posting - https://retropie.org.uk/forum/topic/3/read-this-first
-
@buzz ok ill see what i could do
-
@buzz i found this, he had the same controller as me any other things i could do to make it work (ill try to get the error in ssh in a bit) https://retropie.org.uk/forum/topic/3200/afterglow-prismatic-wired-controller-for-xbox-one
-
@BuZz here is what it says https://m.imgur.com/kMKZZEZ
I need help fixing this (look at thr link)
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.