advmame, dolphin bar, and wii controller gun

painttoad

are you sure that your lightgun is being seen as mouse 0? maybe its mouse 1?

input_map[p1_lightgunx] mouse[0,x]
input_map[p1_lightguny] mouse[0,y]

jmbooth2000

@mitu When I try advm I get nothing on mouse0 when I move. Interestingly if I cat /dev/input/mouse0 it shows lots of activity so at the kernel level there is definitely action.

One possible complication is that I have a logitec K400+ wireless keyboard which is also plugged in. That I switched the order of the usbs and it shows up a mouse1 and when I press a button / move sure enough advm see the activity as mouse1 (it works).

I tried swapping to device_mouse raw from sdl as part of the debugging I have swapped back still nothing.

Thanks
Jonathan

jmbooth2000

@jmbooth2000 I look in the xorg logs and sure enough the wii appears with input from both js0 and mouse 0. See below. As I said it works as a mouse in X but this confirms that the hardware is working and its at least somewhat setup. I'm not sure why udev is tagging the wii remote as a joystick...

[ 1359.980] (II) config/udev: Adding input device HJZ Mayflash Wiimote PC Adapter Mouse (/dev/input/event1)
[ 1359.980] () HJZ Mayflash Wiimote PC Adapter Mouse: Applying InputClass "libinput pointer catchall"
[ 1359.980] (II) Using input driver 'libinput' for 'HJZ Mayflash Wiimote PC Adapter Mouse'
[ 1359.982] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 24 paused 0
[ 1359.982] () HJZ Mayflash Wiimote PC Adapter Mouse: always reports core events
[ 1359.982] () Option "Device" "/dev/input/event1"
[ 1359.982] () Option "_source" "server/udev"
[ 1359.986] (II) event1 - HJZ Mayflash Wiimote PC Adapter Mouse: is tagged by udev as: Mouse
[ 1359.987] (II) event1 - HJZ Mayflash Wiimote PC Adapter Mouse: device is a pointer
[ 1359.987] (II) event1 - HJZ Mayflash Wiimote PC Adapter Mouse: device removed
[ 1359.987] () Option "config_info" "udev:/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:0079:1802.0005/input/input1/event1"
[ 1359.987] (II) XINPUT: Adding extended input device "HJZ Mayflash Wiimote PC Adapter Mouse" (type: MOUSE, id 8)
[ 1359.987] () Option "AccelerationScheme" "none"
[ 1359.987] () HJZ Mayflash Wiimote PC Adapter Mouse: (accel) selected scheme none/0
[ 1359.987] () HJZ Mayflash Wiimote PC Adapter Mouse: (accel) acceleration factor: 2.000
[ 1359.987] () HJZ Mayflash Wiimote PC Adapter Mouse: (accel) acceleration threshold: 4
[ 1359.992] (II) event1 - HJZ Mayflash Wiimote PC Adapter Mouse: is tagged by udev as: Mouse
[ 1359.992] (II) event1 - HJZ Mayflash Wiimote PC Adapter Mouse: device is a pointer
[ 1359.995] (II) config/udev: Adding input device HJZ Mayflash Wiimote PC Adapter Mouse (/dev/input/js0)
[ 1359.995] (II) No input driver specified, ignoring this device.
[ 1359.995] (II) This device may have been added with another device file.
[ 1359.997] (II) config/udev: Adding input device HJZ Mayflash Wiimote PC Adapter Mouse (/dev/input/mouse0)
[ 1359.997] (II) No input driver specified, ignoring this device.
[ 1359.997] (II) This device may have been added with another device file.
[ 1359.999] (II) config/udev: Adding input device HJZ Mayflash Wiimote PC Adapter Consumer Control (/dev/input/event2)
[ 1359.999] () HJZ Mayflash Wiimote PC Adapter Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 1359.999] (II) Using input driver 'libinput' for 'HJZ Mayflash Wiimote PC Adapter Consumer Control'

Thanks for any additional help
Jonathan

jmbooth2000

@jmbooth2000 Pulling my hair out here with the dolphin bar. Current advmame.rc config file is,

device_mouse raw
device_raw_firstkeyhack no
device_raw_mousedev[0] /dev/input/by-id/usb-HJZ_Mayflash_Wiimote_PC_Adapter-if01-event-mouse
device_raw_mousedev[1] /dev/input/mouse1
device_raw_mousedev[2] /dev/input/mouse2
device_raw_mousedev[3] /dev/input/mouse3
device_raw_mousetype[0] ps2
device_raw_mousetype[1] ps2
device_raw_mousetype[2] ps2
device_raw_mousetype[3] ps2

When I run advm I get,
Driver event, mouses 1
mouse 0 '0079_1802', axes 1, buttons 0
axe 0 [hwheel]

Press Break to exit
mouse 0, [], [ 0] ( 0 ms)
which shows there are no buttons and only one axes.

when I run "evtest /dev/input/by-id/usb-HJZ_Mayflash_Wiimote_PC_Adapter-if01-event-mouse" in another window i get,
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x79 product 0x1802 version 0x1001
Input device name: "HJZ Mayflash Wiimote PC Adapter Mouse"
Supported events:
Event type 0 (EV_SYN)
Event type 1 (EV_KEY)
Event code 272 (BTN_LEFT)
Event code 273 (BTN_RIGHT)
Event code 274 (BTN_MIDDLE)
Event code 275 (BTN_SIDE)
Event code 276 (BTN_EXTRA)
Event type 2 (EV_REL)
Event code 8 (REL_WHEEL)
Event type 3 (EV_ABS)
Event code 0 (ABS_X)
Value 414
Min 0
Max 512
Event code 1 (ABS_Y)
Value 358
Min 0
Max 400
Event type 4 (EV_MSC)
Event code 4 (MSC_SCAN)
Which is total correct and better yet when I press the buttons / move the gun they update.

Even when the are both running in parallel evtest outputs the right results and advj outputs nothing... Arg...

Any suggestions or pointers greatly appreciated. The wii gun works perfectly with pixel and in the retroarch gui but behaves like a joystick in advmame.

Is there anyway to get advm to output more logging? Something weird is going on as there are both pointing to the same device.

Thanks
Jonathan

mitu

You can add -log parameter to advm and it will produce an advm.log file in the current folder. Open it and paste its contents on pastebin.com.

jmbooth2000

result https://pastebin.com/B83gPae7

Some key sections pasted below - first the good news
event: open device /dev/input/event1
event: driver:1.0.1
event: device vendor:0x0079 product:0x1802 version:0x1001 bus:0x0003 (usb)
event: name:"HJZ Mayflash Wiimote PC Adapter Mouse"
event: physical_location:"usb-0000:01:00.0-1.3/input1"
event: EV_0x0: 0x0 0x1 0x2 0x3 0x4
event: EV_KEY: BTN_LEFT BTN_RIGHT BTN_MIDDLE BTN_SIDE BTN_EXTRA
event: EV_REL: REL_WHEEL
event: EV_ABS: ABS_X[val:0,min:0,max:512,fuzz:0,flat:0] ABS_Y[val:0,min:0,max:400,fuzz:0,flat:0]
event: EV_MSC: 0x4
event: desc:"HJZ Mayflash Wiimote PC Adapter Mouse"

Which seems like good news until you read on and see,
event: open device /dev/input/event1
mouseb:event: not a mouse on device /dev/input/event1

Which seems to say the device on event1 isn't a mouse and explains why it doesn't treat it as a mouse. As a reminder evtest /dev/input/event1 confirms it is a mouse and detects key presses and movement correctly. It also works as a mouse in pixel and retroarch.

Seems like either I have a weird configuration issue that is tricking advm into not recognizing this is a mouse or perhaps a software bug?

Thanks for any help
Jonathan

mitu

@jmbooth2000 said in advmame, dolphin bar, and wii controller gun:

Seems like either I have a weird configuration issue that is tricking advm into not recognizing this is a mouse or perhaps a software bug?

Advmame doesn't consider the device a mouse, it's looking at EV_REL and not EV_ABS (https://github.com/amadvance/advancemame/blob/9873ffe3dce1e65746f88e3667e771ee5045b621/advance/linux/event.c#L2243). Looks like it's not supporting absolute pointing devices ?

jmbooth2000

Ouch. Sounds like i may be at a dead end if advmame doesn't support absolute pointing devices - argh.

mitu

Can't say for sure, but it doesn't seem to try the raw input option, which would search for /dev/input/mouseX.

jmbooth2000

@jmbooth2000 thanks anyway.

mitu

That being said, you should try one of the other MAME emulators - Mame2003 has mouse support and RetroArch seems to detect your mouse. As a plus, it supports absolute pointing devices.