Problem connecting a bluetooth ps3 controller

messy

none of that is happening.

I just uninstalled the driver, rebooted and then reinstalled then installed clone support for gasia.
Went and checked paired devices and was surprised to see the pad still paired so i removed it and then re-added - everythign seemed to go just fine except as I am quiting out of teh BT config bit I get that message again saying
"PS3 driver temporarily interupted in order to allow compatibility with standard BT periferals. Please repair duel shock to continue or disregard"

Click ok to go back to menu.

Now if i remove the usb cable it doesnt seem to pair

mitu

@messy said in Problem connecting a bluetooth ps3 controller:

Now if i remove the usb cable it doesnt seem to pair

Just to get a common understanding - by pairing I mean the controller is connected via Bluetooth, without any USB connection. Connecting via USB is not pairing.

none of that is happening.

You don't get a prompt in EmulationStation to configure the controller, after a reboot/restart ?

messy

@messy said in Problem connecting a bluetooth ps3 controller:

"PS3 driver temporarily interupted in order to allow compatibility with standard BT periferals. Please repair duel shock to continue or disregard"

The very first time I started after a os install it prompted and i setup the controller with usb. It has never promted since.

I have just done another fresh install of OS and gone through to the regestering the device - It still gives me "PS3 driver temporarily interupted in order to allow compatibility with standard BT periferals. Please repair duel shock to continue or disregard"

Is that normal and I just didnt notice it before or is something now wrong with the controller? I could have sworn the first time I did this I didnt get that message and I hoped a fresh install would fix it.

Also, while before teh controller would pair (no usb cable) but just not work - now it wont even pair anymore :(

mitu

@messy said in Problem connecting a bluetooth ps3 controller:

The very first time I started after a os install it prompted and i setup the controller with usb. It has never prompted since.

I see, I thought you've reset the controllers before re-doing the pairing.
The message about the PS3 driver appears when you have the ps3controller driver installed and it's ok. Because the ps3controller driver block the pairing with other Bluetooth devices, the driver is stopped during Bluetooth pairing.

My advice would be to remove the ps3controller and try only with the sixaxis driver, configured for 3rd party controllers. Remove any Bluetooth connected devices from the Bluetooth menu before pairing.

If pairing works - then go back to the main RetroPie-Setup menu, go to Configuration/Tools, then emulationstation and choose to clear/reset the controller configuration. Exit to the main RetroPie-Setup menu, then reboot.
After restart, EmulationStation will prompt you to setup a controller - if the pairing worked and after the reboot the wireless connection is re-established, you can try to configure the Bluetooth connected controller.

messy

did a fresh install again and tried the sixaxis - everything seemed to go ok, didnt get the "driver disabled message" - however the pad wont pair at all this time. Im fairly sure this is what happened last time I tried the sixaxis driver.

I then went back to the ps3 driver and at the end got that "driver disabled message". The first time I did this - when I managed to get it to pair, I dont think I got that message.

I dont think that message is saying its blocking pairing with other devices -

"PS3 driver temporarily interupted in order to allow compatibility with standard BT periferals. Please repair duel shock to continue or disregard"

Its saying the driver has been interupted to allow some other device. It sounds like its trying to pair with some generic deivce and has interupted the driver in order to do so.

When I go to add a new device, I see my ps3 controller and 1 other device, except I dont ahve any other devices, I even made sure my mobile phone has BT turned off.
I do however live in flats so I guess It could be a neighbors device.

Is there anyway to prioritise the driver? - I dont care about other BT peripherals

mitu

@messy said in Problem connecting a bluetooth ps3 controller:

Is there anyway to prioritise the driver? - I dont care about other BT peripherals

I don't think that other devices showing up are an issue, I wouldn't worry about it.

messy

even though thats specifically what the error message says?

mitu

@messy What error message ?

messy

"PS3 driver temporarily interrupted in order to allow compatibility with standard BT peripherals. Please repair duel shock to continue or disregard"

mitu

As explained, that's not an error message.

messy

ok, its not an error, but where it says "PS3 driver temporarily interupted" - does that mean it was just a blip and is now fine again? Or does it mean its been temporarily disabled in order to allow a generic device to work correctly?

messy

I GOT IT WORKING!!!

Good Grief.....in the end I used the PS3 driver and what made ti work was, just after registering the device a window pops up saying you can now unplug your cable.

At this point, I unplugged and paired the controller and THEN with the keyboard moved back to the main menu to configure it.

Trying to pair the device at ANY other point during the process and it doesnt like it.

Have rebooted and the device still conect and works so it seems stable :D

Cheers for the help.