Daphne . Arcade joystick orientation wrong.

[dabbler]

@pjft said in Daphne . Arcade joystick orientation wrong.:

https://github.com/pjft/daphne-emu/commits/retropie

Thanks, sounds like a good plan - my linux knowledge is lacking, im doing the following:

cd /home/pi/RetroPie-Setup/
sudo ./retropie_packages.sh daphne clean
sudo git clone https://github.com/pjft/daphne-emu/ tmp/build/daphne
sudo ./retropie_packages.sh daphne depends
sudo ./retropie_packages.sh daphne build
sudo ./retropie_packages.sh daphne install
sudo ./retropie_packages.sh daphne configure

However it fails on the install line (.bin not found), are you able to help please?

Thanks so much!

[pjft]

@dabbler Well, that's already quite more than what I'd expect from someone lacking Linux knowledge :D

I believe that you'd need to check out the "retropie" branch on my end, so:

sudo git clone https://github.com/pjft/daphne-emu/ tmp/build/daphne
cd tmp/build/daphne
sudo git checkout retropie
cd /home/pi/RetroPie-Setup/

and then the rest.

[dabbler]

@pjft said in Daphne . Arcade joystick orientation wrong.:

sudo git checkout retropie

Thanks - "sudo git checkout daphne" was required!

All now built, installed and about to test.

[dabbler]

@dabbler said in Daphne . Arcade joystick orientation wrong.:

@pjft said in Daphne . Arcade joystick orientation wrong.:

sudo git checkout retropie

Thanks - "sudo git checkout daphne" was required!

All now built, installed and about to test.

Joystick works. Alas, Bega, Badlands do not launch - just a black screen. Going back to the offical retopie version, these do work, but the joystick dosnt :-( Such a shame @pjft Any thoughts? Thanks

[pjft]

@dabbler sudo git checkout retropie

Actually, just re-merged it there. Try again, but make sure it's retropie, not daphne as you had mentioned.

[dabbler]

@pjft said in Daphne . Arcade joystick orientation wrong.:

@dabbler sudo git checkout retropie

Actually, just re-merged it there. Try again, but make sure it's retropie, not daphne as you had mentioned.

No luck im afraid, i get :

pi@retropie:~/RetroPie-Setup $ sudo git checkout retropie
error: pathspec 'retropie' did not match any file(s) known to git

full steps:

cd /home/pi/RetroPie-Setup/
sudo ./retropie_packages.sh daphne clean
sudo git clone https://github.com/pjft/daphne-emu/ tmp/build/daphne
sudo git checkout retropie
sudo ./retropie_packages.sh daphne depends
sudo ./retropie_packages.sh daphne build
sudo ./retropie_packages.sh daphne install
sudo ./retropie_packages.sh daphne configure

[pjft]

@dabbler You're missing navigating to the daphne folder, as I mentioned, after cloning the repository.

sudo git clone https://github.com/pjft/daphne-emu/ tmp/build/daphne
cd tmp/build/daphne
sudo git checkout retropie
cd /home/pi/RetroPie-Setup/

[dabbler]

@pjft said in Daphne . Arcade joystick orientation wrong.:

sudo git clone https://github.com/pjft/daphne-emu/ tmp/build/daphne
cd tmp/build/daphne
sudo git checkout retropie
cd /home/pi/RetroPie-Setup/

Works a treat. Joystick fully working and Bega etc working - thanks so much @pjft

For others, the full steps to install and build this version are:

cd /home/pi/RetroPie-Setup/
sudo ./retropie_packages.sh daphne clean
sudo git clone https://github.com/pjft/daphne-emu/ tmp/build/daphne
cd tmp/build/daphne
sudo git checkout retropie
cd /home/pi/RetroPie-Setup
sudo ./retropie_packages.sh daphne build
sudo ./retropie_packages.sh daphne install
sudo ./retropie_packages.sh daphne configure

[phnman]

@dabbler

With the updated space on the first line everything works great. Thanks to pjft for compiling

[tafaz73]

@pjft
Finally someone upped again this thread. I'm still stuck with non orking joystick. Unfortunately, when I'm building Daphne I receive following error

g++: error: vldp2/libmpeg2/cpu_accel.o: No such file or directory
g++: error: vldp2/libmpeg2/alloc.o: No such file or directory
g++: error: vldp2/libmpeg2/cpu_state.o: No such file or directory
g++: error: vldp2/libmpeg2/decode.o: No such file or directory
g++: error: vldp2/libmpeg2/header.o: No such file or directory
g++: error: vldp2/libmpeg2/motion_comp.o: No such file or directory
g++: error: vldp2/libmpeg2/idct.o: No such file or directory
g++: error: vldp2/libmpeg2/idct_mmx.o: No such file or directory
g++: error: vldp2/libmpeg2/motion_comp_mmx.o: No such file or directory
g++: error: vldp2/libmpeg2/slice.o: No such file or directory
g++: error: vldp2/libvo/video_out.o: No such file or directory
g++: error: vldp2/libvo/video_out_null.o: No such file or directory
make: *** [Makefile:67: all] Error 1
/home/pi/RetroPie-Setup

Any ideas?

[pjft]

@tafaz73 No ideas.

Are you following these instructions?

https://retropie.org.uk/forum/topic/16464/daphne-arcade-joystick-orientation-wrong/115?_=1611934569118

Have you updated the RetroPie-Setup script?

[tafaz73]

@pjft
Yes, this is what I have done.
The issue happened at the end of

sudo ./retropie_packages.sh daphne build

No, I didn't update Retropie-Setup script. I will do and then test the build again.

Thank you

[Pennywisekrueger]

I like others have just found this thread seconds before tearing my last strands of hair out.

For the complete raspberry pi noob like me - what do I do?

1. Connect to wifi / lan
2. Boot to command line and
3. Type the commands in exactly as shown below;

cd /home/pi/RetroPie-Setup/
sudo ./retropie_packages.sh daphne clean
sudo git clone https://github.com/pjft/daphne-emu/ tmp/build/daphne
cd tmp/build/daphne
sudo git checkout retropie
cd /home/pi/RetroPie-Setup
sudo ./retropie_packages.sh daphne build
sudo ./retropie_packages.sh daphne install
sudo ./retropie_packages.sh daphne configure

4. After this do you need to amend the daphne config file still?

Thanks for your help (anyone who sees this) 😣

[pjft]

@pennywisekrueger Good question about step 4, I don't have an answer as I had already set up my buttons - this just adds the joystick support.

I imagine you might have to edit the file, as your button configuration will be different to others' (at least fine-tuning) but worth launching Daphne before changing the file and seeing how it goes.

[Pennywisekrueger]

@pjft but I got the rest right!!? 🙏🏼

[pjft]

@pennywisekrueger As far as I remember, yes.

[Pennywisekrueger]

This post is deleted!

[Pennywisekrueger]

@pjft I’m getting stuck at this line

sudo git clone https://github.com/pjft/daphne-emu/ tmp/build/daphne

Should this be one line or two?

[pjft]

@pennywisekrueger one, but you haven't given me any error message or even what RetroPie version you're running and on what pi, etc.

Please share more details about what you're running to.

[Pennywisekrueger]

@pjft sorry - I’m on a pi 3b+

I’ve now got to the line

sudo./retropie_packages.sh daphne build

And it says no such file or directory