Rom transfer through USB-stick troubleshooting

mitu · 12 Feb 2021, 05:03

@chishiya said in Rom transfer through USB-stick troubleshooting:

File sharing over network
How do I do that?

https://retropie.org.uk/docs/Transferring-Roms/#samba-shares

Chishiya · 12 Feb 2021, 05:10

@mitu
Thank you, I will try this!

Chishiya · 12 Feb 2021, 06:11

@mitu said in Rom transfer through USB-stick troubleshooting:

@chishiya said in Rom transfer through USB-stick troubleshooting:

File sharing over network
How do I do that?

https://retropie.org.uk/docs/Transferring-Roms/#samba-shares

HI again, I've been trying now to follow the tutorial. It says you should type:
//RETROPIE but when I do that it comes up with an error message:
(Translated from swedish)
The webpage couldn't be found
It wasn't able to find the IP-adress to the server on retropie.

Then you can do network diagnostics etc. The result of that said that it could be a firewall issue. I know that can be a hassle, how do I fix this?

mitu · 12 Feb 2021, 06:17

@chishiya said in Rom transfer through USB-stick troubleshooting:

//RETROPIE but when I do that it comes up with an error message:

It's not //retropie, but \\retropie.

Chishiya · 12 Feb 2021, 06:37

@mitu
Ok I might have written it wrong, I tried now what you wrote and it says: No access to the file

mitu · 12 Feb 2021, 07:00

Where are you typing \\retropie ? In your browser or in the file explorer ?

Chishiya · 12 Feb 2021, 07:08

@mitu The file explorer. I run on windows 7. I right click on the windows symtom/start and select open windows explorer

mitu · 12 Feb 2021, 07:20

@chishiya Show a screenshot of the error. If your Pi connected to the network - same one as your PC ?

Chishiya · 12 Feb 2021, 07:45

@mitu

mitu · 12 Feb 2021, 08:43

@chishiya Is your Pi connected to the same network as the PC ?
If you open a command prompt on windows (cmd.exe) and run

ping retropie

do you get a successful reply, with the network address ?
Try also with \\retropie.local, instead of just \\retropie.

Chishiya · 12 Feb 2021, 09:20

@mitu

Chishiya · 12 Feb 2021, 09:22

@mitu I am getting quite furious about this, is there a setup I need to do somewhere? Like I have to press "allow" somewhere, do I need to do something in the Rasbian OS or is the problem within my windows 7 computer?

Chishiya · 12 Feb 2021, 09:44

@mitu

I've been trying now on two computers at home. One is using windows 7 and the other one 10. On either one I can't see the other one in the network folder. Its like they don't exist. The only thing I can see is the Smart TV and that's one the Windows 10.

Chishiya · 2 Dec 2021, 11:21

Some updates, after some tweaking on both computers I am now able to see my two computers on my Windows 10 computer. From that computer, I can then double click on the Windows 10 computer and see the folders etc. When I try and click on the other computer (Windows 7) it says: Can't reach that computer.
Code: 0x80070035

mitu · 12 Feb 2021, 12:36

@chishiya If it works from Win10, but not from Win7, I guess the issue is somewhere on the Win7 system - maybe it's connected to a different network or has a firewall in place ?

Chishiya · 12 Feb 2021, 15:00

@mitu You are totally right, so when I realized that it seems like it works from the Windows 10 computer I followed your previous comments in the thread but unfortunately the same error messages came like when I tried to reach the Rpi before. Now I can't see the Windows 7 in the Network, but I can see the Windows 10 (With folders etc) from the windows 10 network page so that doesn't really help me hehe.

YFZdude · 12 Feb 2021, 15:06

@chishiya

Personally, I've never been able to access my Pi from using \\retropie. My conclusion was that Windows has some pretty specific and messy network preferences and it just plain doesn't want to recognize the format that the Pi will advertise it's name on the network for discovery.

However, I have always been able to access my Pi by using the IP address. \\192.168.x.x Insert your numbers instead though.

Chishiya · 2 Dec 2021, 15:18

@yfzdude

Thank you for your suggestion, I just tried it and unfortunately I got an error message, however, it is a different error code. Sorry about the Swedish.

Chishiya · 13 Feb 2021, 13:34

SOLVED!

I have now solved my issue and will try and explain what I did (In case someone else goes through the same problem)

So what I was trying to do was to connect a Windows 7 computer or a Windows 10 computer to the Raspberry Pi over the network so I could easier send files between my Windows computers and the Raspberry pi.

What you need to do is to activate protocols in regard to network on the computers: that they are allowed to send information , that they are visible etc. You also need to make sure you have enabled SMB on the windows computer.
Then you need to follow this tutorial on this link, this link was the final puzzle piece that solved it for me. =)
https://pimylifeup.com/raspberry-pi-samba/

Ps. If I have time I will see if I can post a more in-depth tutorial.

Thank you
@mitu for you many replies and thank you
@yfzdude for your input as well =)