Arcade Buttons - How Many? Layout?

dsstrainer

Sorry I hadn't seen these. Instead of Select/Start as exit, you can turn off hotkey support and just map a button to be exit. I did all of my mapping through the actual config file. I only used emulation station's mapping for the menu itself.. then I manually changed retroarch to a setup that worked for my encoder mapping. Finally mapped it through mame2003 for mame.

caver01

@dsstrainer I did exactly the same thing.

dsstrainer

Bringing this back up again in the latest versions of mame and retropie.
It looks like the powers that be claim that this is the correct end-all-be-all layout as far as what retroarch expects
https://www.reddit.com/r/RetroPie/comments/j5o21b/how_should_i_configure_a_6button_arcade_controller/
Y X L
B A R

I could live with this but what are people doing about Street fighter games?
Y X L
B A R
will default to
HP LK MK
LP MP HK
in mame2003/mame2003+

So are people going into each SF game and remapping the buttons just for those to be
LP MP HP
LK MK HK
?

Some people claim that if you use YXL, BAR then SF should all be correct by default but that does not appear to be the case

dsstrainer

@dsstrainer So after digging into the mame2003 menu I was right... it defaults the layout as
BAY
XLR
At least it was for me. When I deleted the default.cfg and sf2.cfg files under mame2003+/cfg it still used those
So I manually set the global to be
YXL
BAR

and viola... now all games work fine. Not sure why it was setting itself the other way but looks like this will work at least for most games setting button 1 as the starting button and for SF2 games they are all mapped fine.

caver01

@dsstrainer I think I did the same thing years ago, then saved a rom-specific mapping config for title that required it. It was handy to be able to go, OH, this is just the Street Fighter mapping? then drop in the appropriate cfg file for that rom.

By the way, it seems like it has been ages since I was on the forum here, but I finally have a P4 to play with, so that’s going into the cabinet this weekend. V4.8 was nicely timed for me ;-) so next comes a bunch of file transfers and re-configurations to get my power and volume working, test my spinners etc. etc. etc. It’s a lot of work, but I need to read posts again and re-familiarlize myself with stuff like this!

dsstrainer

So I'm again having second thoughts on this.
YXL
BAR
is what they say you should use... but I have a setup where I can use either the joystick and buttons OR use a gamepad.

So if I set up "BAR" as "ABC" in genesis using remap, that works great for the arcade buttons, but that means I have to use the B, A, and Right Shoulder on my gamepad. That's not so intuitive. And you can't have (nor want to have) per-controller remaps that I've seen.

Definitely thinking the best is to have
LXR
YBA
and remap them accordingly so that I would have YBA as the ABC buttons and on the gamepad it would be the bottom 3 buttons of the usual 4 (west, south, east) which is much more intuitive.

-EDIT- But then I guess arcade would be screwed up as L would be button 1 so in SF2, L is light punch, X med, R Hard.. I guess there's no way to win them all.

caver01

@dsstrainer I think everyone is going to have to reach their own conclusions based on whatever standards are out there. Part of the issue here is just flexibility—the huge variety of emulated systems we have available combined with the potential variability in individual projects requires decisions to be made on a case by case basis.

It seems clear to me that the standard, recommended mapping caters more toward hand-held controller use cases which is fine. For my project however, I align more with the legacy, native MAME application button mapping where the concept of AB or XY or LR have no meaning. In my world, it is all about button numbers Btn1, Btn2, Btn3, Btn4, Coin, START, etc. etc.

So, how these map to the ABXLYR is the issue. At some point, I simply had to admit that I am building an Arcade system whose primary function is play coin-operated video games. I may be a dying breed of cabinet builders using keyboard interfaces, so my challenge is to properly map my control panel layout so that my keyboard interface (ipac) triggers the switches I expect it to for arcade game. This has never changed, but I know the mapping through ES and Retroarch maybe has.

COIN START

SW1 SW2 SW3
SW4 SW5 SW6

This is always my goal, regardless of how these have to flow through “A” and “B” mappings

dankcushions

@dsstrainer said in Arcade Buttons - How Many? Layout?:

I could live with this but what are people doing about Street fighter games?
Y X L
B A R
will default to
HP LK MK
LP MP HK
in mame2003/mame2003+

i have no idea how it works now, but i for sure made mame2003 default to that when i was working on it years ago, as it's the sensible/standard layout...

i would check the core options for a 'controller type' option. maybe there's a way of getting the old functionality back.

dankcushions

@caver01 said in Arcade Buttons - How Many? Layout?:

So, how these map to the ABXLYR is the issue.

sure, but the issue was solved with street fighter 2 on the SNES in the early 90s :) that's where the XYL/BAR came from, and since libretro is geared around the retropad abstraction (effectively an iteration on a SNES controller), all libretro emulators must map back to that in a way that makes sense by default.

the issue is with 8 button controllers (eg playstation, xbox). fighting games of that era have moved to towards a
Y X R1
B A R2
layout, for whatever reason. back when i was masochistic enough to involve myself with MAME development, this was called the 'modern' controller layout and selectable in core options. i think SNES was called "classic".

caver01

That’s right. Retropad abstraction. . . Thanks for the reminder about that terminology.

None of this is actually a problem—it’s just a matter of development solving the needs of everyone AND configuration solving the needs of an individual project.

It has been a while since I was deep into these details as I tend to come and go with other projects/hobbies getting in the way. Someone gave me a Pi4 which is the first in my collection, so naturally, I put it into the arcade build and setup a fresh image of RetroPie 4.8. Now, I have LOTS of work to get it going again, so I am re-learning the controller configs, transcribing some stuff from 2003 to 2003 plus etc., not to mention getting some of my GPIO inputs working again, dealing with different HDMI cords, USB-C, and on and on.

There is actually what I will call a second generation of nostalgia in all of this nostalgia!