Old Computer Appreciation Thread

duglor

@Folly Another thing- switching to Archimedes- I tried to open .jfd files and that did not work.

Folly

@duglor said in Old Computer Appreciation Thread:

@Folly I mean, the Mame Tab is coming up ok with your test?

Yes, correct the mame tab key works with your line. (testing on my computer)
So your problem is something else.

Folly

@duglor said in Old Computer Appreciation Thread:

@Folly Another thing- switching to Archimedes- I tried to open .jfd files and that did not work.

With a command you can easily see what kind of media is supported :

pi@raspberrypi:~ $ /opt/retropie/emulators/mame/mame -listmedia aa5000
SYSTEM           MEDIA NAME       (brief)    IMAGE FILE EXTENSIONS SUPPORTED
---------------- --------------------------- -------------------------------
aa5000           harddisk         (hard)     .chd  .hd   .hdv  .2mg  .hdi  
aa5000           floppydisk       (flop)     .mfi  .dfi  .hfe  .mfm  .td0  .imd  .d77  .d88  .1dd  .cqm  .cqi  .dsk  .ima  .img  .ufi  .360  .ipf  .adf  .apd  .jfd  .ads  .adm  .adl  .ssd  .bbc  .dsd  .st   .msa  
aa5000           printout         (prin)     .prn  
aa5000           romimage         (rom)      .bin  .rom

Seems .jfd files are supported.
Could be anything why the files aren't working.
Would be guessing so I can't help you with this.

Edit (just a few suggerstions) :

be sure you don't run the file with basename runcommands
try both -flop1 and -flop3 runcommands

Folly

@duglor said in Old Computer Appreciation Thread:

@Folly Also, one game i have says it needs/lacks PRODOS on the main screen inside the game and will not run . Is there another disk I must find and boot it up with or is it a missing bios file -or- neither?

Probably, just like it says, it needs PRODOS.
Try and find a disk with PRODOS and boot with that.
Then try to boot the game.

TPR

@Folly I'm now getting a very weird error and some of my ADAM games aren't running. Any idea what could be causing this? All of the .dsk games seem to still work, but all the .ddp games just kick right back out to ES.

Any idea what could be causing this as my .ddp games did work before.

Parameters: 
Executing: /home/pi/RetroPie-Setup/scriptmodules/run_mess.sh /opt/retropie/emulators/retroarch/bin/retroarch /opt/retropie/libretrocores/lr-mess/mess_libretro.so /opt/retropie/configs/adam/retroarch.cfg adam /home/pi/RetroPie/BIOS -ui_active -cass1 "/home/pi/RetroPie/roms/adam/Pitfall.ddp" --appendconfig /dev/shm/retroarch.cfg
[.] parameters dump
\t_retroarchbin: /opt/retropie/emulators/retroarch/bin/retroarch
\t_messpath: /opt/retropie/libretrocores/lr-mess/mess_libretro.so
\t_config: /opt/retropie/configs/adam/retroarch.cfg (+ /opt/retropie/configs/adam/retroarch.cfg.add)
\t_cfg_directory: /opt/retropie/configs/adam
\t_system: adam
\t_biosdir: /home/pi/RetroPie/BIOS
dirname: invalid option -- 'u'
Try 'dirname --help' for more information.
dirname: invalid option -- 'c'
Try 'dirname --help' for more information.
\t_romdir: /home/pi/RetroPie/roms/adam
\t/tmp/mess.cmd content: adam -rp /home/pi/RetroPie/BIOS -cfg_directory /opt/retropie/configs/adam "-ui_active" "-cass1" "/home/pi/RetroPie/roms/adam/Pitfall.ddp"
rm: cannot remove '/home/pi/RetroPie/roms/adam/tmpmess.cmd': No such file or directory
rm: cannot remove '/opt/retropie/configs/adam/tmpconfig.add': No such file or directory
[.] launching: /opt/retropie/emulators/retroarch/bin/retroarch --verbose --config /opt/retropie/configs/adam/retroarch.cfg --appendconfig /opt/retropie/configs/adam/tmpconfig.add -L /opt/retropie/libretrocores/lr-mess/mess_libretro.so /home/pi/RetroPie/roms/adam/tmpmess.cmd
[INFO] [Config]: Loading config from: "/opt/retropie/configs/adam/retroarch.cfg".
[INFO] [Config]: Appending config "/opt/retropie/configs/adam/tmpconfig.add".
[WARN] [GameMode]: GameMode cannot be enabled on this system ("dlopen failed - libgamemode.so: cannot open shared object file: No such file or directory.") https://github.com/FeralInteractive/gamemode needs to be installed.
[WARN] [Config]: GameMode unsupported - disabling...
[INFO] RetroArch 1.10.0 (Git e9e85f3)
[INFO] === Build =======================================
[INFO] Capabilities:  NEON VFPv3 VFPv4
[INFO] Built: Jan 13 2023
[INFO] Version: 1.10.0
[INFO] Git: e9e85f3
[INFO] =================================================
[INFO] [Input]: Found input driver: "x".
[INFO] [Core]: Loading dynamic libretro core from: "/opt/retropie/libretrocores/lr-mess/mess_libretro.so"
[INFO] [Overrides]: Core-specific overrides found at "/home/pi/.config/retroarch/config/MAME/MAME.cfg".
[INFO] [Overrides]: No content-dir-specific overrides found at "/home/pi/.config/retroarch/config/MAME/adam.cfg".
[INFO] [Overrides]: No game-specific overrides found at "/home/pi/.config/retroarch/config/MAME/tmpmess.cfg".
[INFO] [Config]: Appending config "/home/pi/.config/retroarch/config/MAME/MAME.cfg".
Error opening translation file English
Adding monitor screen0 (640 x 480) a:1.333333
wp_r80.rom ROM NEEDS REDUMP
WARNING: the machine might not run correctly.
/home/pi/RetroPie-Setup/scriptmodules/run_mess.sh: line 76: 26926 Killed                  "$@"

and here's from my emulators file:

lr-mess-adam-disk = "/home/pi/RetroPie-Setup/scriptmodules/run_mess.sh /opt/retropie/emulators/retroarch/bin/retroarch /opt/retropie/libretrocores/lr-mess/mess_libretro.so /opt/retropie/configs/adam/retroarch.cfg adam /home/pi/RetroPie/BIOS -ui_active -flop1 %ROM%"
lr-mess-adam-cass = "/home/pi/RetroPie-Setup/scriptmodules/run_mess.sh /opt/retropie/emulators/retroarch/bin/retroarch /opt/retropie/libretrocores/lr-mess/mess_libretro.so /opt/retropie/configs/adam/retroarch.cfg adam /home/pi/RetroPie/BIOS -ui_active -cass1 %ROM%"

And for comparison, here's the runcommand log for a working .dsk file:

Parameters: 
Executing: /home/pi/RetroPie-Setup/scriptmodules/run_mess.sh /opt/retropie/emulators/retroarch/bin/retroarch /opt/retropie/libretrocores/lr-mess/mess_libretro.so /opt/retropie/configs/adam/retroarch.cfg adam /home/pi/RetroPie/BIOS -ui_active -flop1 "/home/pi/RetroPie/roms/adam/Adventure Pack II (1984) (Victory Software).dsk" --appendconfig /dev/shm/retroarch.cfg
[.] parameters dump
\t_retroarchbin: /opt/retropie/emulators/retroarch/bin/retroarch
\t_messpath: /opt/retropie/libretrocores/lr-mess/mess_libretro.so
\t_config: /opt/retropie/configs/adam/retroarch.cfg (+ /opt/retropie/configs/adam/retroarch.cfg.add)
\t_cfg_directory: /opt/retropie/configs/adam
\t_system: adam
\t_biosdir: /home/pi/RetroPie/BIOS
dirname: invalid option -- 'u'
Try 'dirname --help' for more information.
dirname: invalid option -- 'f'
Try 'dirname --help' for more information.
\t_romdir: /home/pi/RetroPie/roms/adam
\t/tmp/mess.cmd content: adam -rp /home/pi/RetroPie/BIOS -cfg_directory /opt/retropie/configs/adam "-ui_active" "-flop1" "/home/pi/RetroPie/roms/adam/Adventure Pack II (1984) (Victory Software).dsk"
rm: cannot remove '/home/pi/RetroPie/roms/adam/tmpmess.cmd': No such file or directory
rm: cannot remove '/opt/retropie/configs/adam/tmpconfig.add': No such file or directory
[.] launching: /opt/retropie/emulators/retroarch/bin/retroarch --verbose --config /opt/retropie/configs/adam/retroarch.cfg --appendconfig /opt/retropie/configs/adam/tmpconfig.add -L /opt/retropie/libretrocores/lr-mess/mess_libretro.so /home/pi/RetroPie/roms/adam/tmpmess.cmd
[INFO] [Config]: Loading config from: "/opt/retropie/configs/adam/retroarch.cfg".
[INFO] [Config]: Appending config "/opt/retropie/configs/adam/tmpconfig.add".
[WARN] [GameMode]: GameMode cannot be enabled on this system ("dlopen failed - libgamemode.so: cannot open shared object file: No such file or directory.") https://github.com/FeralInteractive/gamemode needs to be installed.
[WARN] [Config]: GameMode unsupported - disabling...
[INFO] RetroArch 1.10.0 (Git e9e85f3)
[INFO] === Build =======================================
[INFO] Capabilities:  NEON VFPv3 VFPv4
[INFO] Built: Jan 13 2023
[INFO] Version: 1.10.0
[INFO] Git: e9e85f3
[INFO] =================================================
[INFO] [Input]: Found input driver: "x".
[INFO] [Core]: Loading dynamic libretro core from: "/opt/retropie/libretrocores/lr-mess/mess_libretro.so"
[INFO] [Overrides]: Core-specific overrides found at "/home/pi/.config/retroarch/config/MAME/MAME.cfg".
[INFO] [Overrides]: No content-dir-specific overrides found at "/home/pi/.config/retroarch/config/MAME/adam.cfg".
[INFO] [Overrides]: No game-specific overrides found at "/home/pi/.config/retroarch/config/MAME/tmpmess.cfg".
[INFO] [Config]: Appending config "/home/pi/.config/retroarch/config/MAME/MAME.cfg".
Error opening translation file English
Adding monitor screen0 (640 x 480) a:1.333333
wp_r80.rom ROM NEEDS REDUMP
WARNING: the machine might not run correctly.
RETRO DEINIT
retro_finish begin
Average speed: 88.41% (5 seconds)
retro exit machine
retro_finish end

Folly

@TPR

I can't really tell by looking at your logs.
The first log shows that it breaks in the run_mess.sh script but then the problem is not revealed.

So I got a pitfill.ddp image and tested it directly on mame.
My file is :
pi@raspberrypi:~/RetroPie/roms/coleco/adam/ddp-flop $ sha1sum *
58ec9355d20edb335f56d372051812c45d891caf Pitfall! (1987) (Telegames USA) (ADE-SD DDP Patched).ddp
( do you have the same file and what size is it ? )

With above image I get this message from the mame log :
Fatal error: Device 5.25" single-sided double density floppy drive load failed: Unable to identify the image format

If you have the same error it's not revealed in your log when using the run_mess.sh script with the retroarch lr-mess core.

So somehow I think that this file needs a DSDD drive to work as the file is also bigger than 160kb.
This probably also means that BIOS roms are missing as you can select DSDD drives in the MAME-GUI (BIOS section).
Could be that you had a DSDD drive selected earlier when it worked or ,
you used another file that worked earlier and mixed those up somehow.

Let me know what file you used and we can look again.

TPR

@Folly Thank you! That gives me more to look into! Also, how can I set it so I can see more of the log to see what is causing it to break? I do think my BIOS files are correct and I will look at the checksum of the Pitfall game but I'm pretty sure it is the same.

Also, where on the Pi is that MAME config stored so I can look to see if something has changed?

TPR

@Folly This is what MAME Currently says when I load up a .dsk file. Although I cannot see it when I load a .ddp file as I cannot get them to load:

Pac-Man Screen Shot 1-30-23, 11.59 AM.png

Pac-Man Screen Shot 1-30-23, 11.59 AM 2.png

I'm just really baffled as to why all my .ddp files worked before and now they do not. I really do not know what could have changed and I've exhausted all my knowledge trying to figure it out!

Also, here is the checksum from my adam_ddp.zip BIOS that I am using:
9405e8f37199841244222fa70f9db3d3

Does it match yours?

Folly

@TPR said in Old Computer Appreciation Thread:

Also, here is the checksum from my adam_ddp.zip BIOS that I am using:
9405e8f37199841244222fa70f9db3d3

I have to look !
I have a .7z file so the sha1sum is different but files inside could be the same.

Indeed strange that it worked before.

Folly

@TPR

I have it working now in mame and lr-mess and also with lr-mess running from the run_mess.sh script.

I assumed .ddp was a floppy image but it turns out DDP's ( Digital Data Pack ) are cassettes.

This is the output of the extensions of mame :

pi@raspberrypi:~ $ /opt/retropie/emulators/mame/mame -listmedia adam
SYSTEM           MEDIA NAME       (brief)    IMAGE FILE EXTENSIONS SUPPORTED
---------------- --------------------------- -------------------------------
adam             cassette1        (cass1)    .wav  .ddp  
adam             cassette2        (cass2)    .wav  .ddp  
adam             floppydisk1      (flop1)    .mfi  .dfi  .hfe  .mfm  .td0  .imd  .d77  .d88  .1dd  .cqm  .cqi  .dsk  
adam             floppydisk2      (flop2)    .mfi  .dfi  .hfe  .mfm  .td0  .imd  .d77  .d88  .1dd  .cqm  .cqi  .dsk  
adam             cartridge1       (cart1)    .rom  .col  .bin  
adam             cartridge2       (cart2)    .bin  .rom  
adam             cartridge3       (cart3)    .bin  .rom  
adam             cartridge4       (cart4)    .bin  .rom

TPR

@Folly Same for me. So I wonder what could be causing it not to work?

Is there another log somewhere I could check?

Folly

@TPR

Same for me

Looked at your first log again.
I see you already used cass1 and it didn't work.

Did you use the valerino module-scripts to install ?
Are you able to run it with mame ?
What run_mess.sh do you use ? ( what is the sha1sum ? )
Which version of lr-mess do you use ?

TPR

@Folly Here's my run_mess script I'm using:

My version of lr-mess is dated 2/24/2021 with a filesize of 182,836,700

Is there another log I can check to see why those .ddp files stop and kick me back out to ES?

duglor

@TPR What is the last version date of either Mess or MAME that the game & Watch games use? Just curious. and if it is mame, that mame is called plain old "MAME" in the retropie , correct

Folly

@TPR said in Old Computer Appreciation Thread:

Your run_mess.sh script is the original from valerino.
I use the updated one of RusselB with these changes.
Though I think it's probably not related to the run_mess.sh script.

Is there another log I can check to see why those .ddp files stop and kick me back out to ES?

Yes, for a better log it's best to run it with mame standalone.
This is an adapted runcommand for mame standalone (for you):

mame-adam-cass1 = "/opt/retropie/emulators/mame/mame -rompath /home/pi/RetroPie/BIOS\;/home/pi/RetroPie/roms/adam -cfg_directory /opt/retropie/configs/adam/mame -v -c -ui_active adam  -cass1 %ROM%"

You can just paste it in your emulators.cfg of /opt/retropie/configs/adam (at least I assume it is there )
Verbose mode (-v) is always on, so no need to change it when booting the .ddp)
Make sure you have mame standalone installed from the exp packages.

Let me know what your log gives.

P.s. You may remove the run_mess.sh from your previous post.

TPR

@Folly I do have stand-alone MAME installed.

I used that runcommand...

It loaded up to "initializing" and then booted me back to ES.

Where can I find the MAME log file at? I can't seem to find it in any of the more obvious places in my directories.

Here is what my runcommand log file says:

Parameters: 
Executing: /opt/retropie/emulators/mame/mame -rompath /home/pi/RetroPie/BIOS\;/home/pi/RetroPie/roms/adam -cfg_directory /opt/retropie/configs/adam/mame -v -c -ui_active adam  -cass1 "/home/pi/RetroPie/roms/adam/Alcazar (1986) (Telegames USA) (ADE-SD DDP Patched).ddp"
Attempting load of mame.ini
Parsing mame.ini
Attempting load of mame.ini
Parsing mame.ini
Attempting load of horizont.ini
Attempting load of computer.ini
Attempting load of raster.ini
Attempting load of source/adam.ini
Attempting load of adam.ini
Reading translation file English: 1 strings, original table at word offset 7, translated table at word offset 9
Loaded 0 translations from file English
Starting plugin data...
Starting plugin hiscore...
Attempting load of mame.ini
Parsing mame.ini
Attempting load of mame.ini
Parsing mame.ini
Attempting load of horizont.ini
Attempting load of computer.ini
Attempting load of raster.ini
Attempting load of source/adam.ini
Attempting load of adam.ini
Available videodrivers: x11 KMSDRM RPI dummy 
Current Videodriver: KMSDRM
	Display #0
		Renderdrivers:
			    opengl (0x0)
			 opengles2 (0x0)
			  opengles (0x0)
			  software (0x0)
Available audio drivers: 
	alsa                
	sndio               
	dsp                 
	disk                
	dummy               
Build version:      0.224 (mame0224)
Build architecure:  
Build defines 1:    SDLMAME_UNIX=1 SDLMAME_X11=1 SDLMAME_LINUX=1 
Build defines 1:    LSB_FIRST=1 MAME_NOASM=1 
SDL/OpenGL defines: SDL_COMPILEDVERSION=2009 USE_OPENGL=1 
Compiler defines A: __GNUC__=8 __GNUC_MINOR__=3 __GNUC_PATCHLEVEL__=0 __VERSION__="8.3.0" 
Compiler defines B: __unix__=1 
Compiler defines C: __USE_FORTIFY_LEVEL=0 
Enter init_monitors
Adding monitor screen0 (1920 x 1080)
Leave init_monitors
Enter sdlwindow_init
Using SDL native texturing driver (SDL 2.0+)
Loaded opengl shared library: <default>

Hints:
	SDL_FRAMEBUFFER_ACCELERATION             (NULL)
	SDL_RENDER_DRIVER                        (NULL)
	SDL_RENDER_OPENGL_SHADERS                (NULL)
	SDL_RENDER_SCALE_QUALITY                 (NULL)
	SDL_RENDER_VSYNC                         (NULL)
	SDL_VIDEO_X11_XVIDMODE                   (NULL)
	SDL_VIDEO_X11_XINERAMA                   (NULL)
	SDL_VIDEO_X11_XRANDR                     (NULL)
	SDL_GRAB_KEYBOARD                        (NULL)
	SDL_VIDEO_MINIMIZE_ON_FOCUS_LOSS         (NULL)
	SDL_IOS_IDLE_TIMER_DISABLED              (NULL)
	SDL_IOS_ORIENTATIONS                     (NULL)
	SDL_XINPUT_ENABLED                       (NULL)
	SDL_GAMECONTROLLERCONFIG                 (NULL)
	SDL_JOYSTICK_ALLOW_BACKGROUND_EVENTS     (NULL)
	SDL_ALLOW_TOPMOST                        (NULL)
	SDL_TIMER_RESOLUTION                     (NULL)
	SDL_RENDER_DIRECT3D_THREADSAFE           (NULL)
	SDL_VIDEO_ALLOW_SCREENSAVER              (NULL)
	SDL_ACCELEROMETER_AS_JOYSTICK            (NULL)
	SDL_MAC_CTRL_CLICK_EMULATE_RIGHT_CLICK   (NULL)
	SDL_VIDEO_WIN_D3DCOMPILER                (NULL)
	SDL_VIDEO_WINDOW_SHARE_PIXEL_FORMAT      (NULL)
	SDL_VIDEO_MAC_FULLSCREEN_SPACES          (NULL)
	SDL_MOUSE_RELATIVE_MODE_WARP             (NULL)
	SDL_RENDER_DIRECT3D11_DEBUG              (NULL)
	SDL_VIDEO_HIGHDPI_DISABLED               (NULL)
	SDL_WINRT_PRIVACY_POLICY_URL             (NULL)
	SDL_WINRT_PRIVACY_POLICY_LABEL           (NULL)
	SDL_WINRT_HANDLE_BACK_BUTTON             (NULL)
Leave sdlwindow_init
Enter sdl_info::create
Leave renderer_sdl2::create
window: using renderer opengl
renderer: flag SDL_RENDERER_ACCELERATED
renderer: flag SDL_RENDERER_TARGETTEXTURE
Audio: Start initialization
Audio: Driver is alsa
Audio: frequency: 44100, channels: 2, samples: 512
sdl_create_buffers: creating stream buffer of 22528 bytes
Audio: End initialization
Keyboard: Start initialization
Input: Adding keyboard #0: System keyboard (device id: System keyboard)
Keyboard: Registered System keyboard
Keyboard: End initialization
Mouse: Start initialization
Input: Adding mouse #0: System mouse (device id: System mouse)
Mouse: Registered System mouse
Mouse: End initialization
Joystick: Start initialization
Input: Adding joystick #0: MicrosoftX-Box360pad (device id: 030000005e0400008e02000020010000)
Joystick: Microsoft X-Box 360 pad [GUID 030000005e0400008e02000020010000]
Joystick:   ...  4 axes, 13 buttons 1 hats 0 balls
Joystick:   ...  Physical id 0 mapped to logical id 1
Joystick:   ...  Has haptic capability
Joystick: End initialization
Searching font Liberation Sans in -. path/s
font Liberation Sans|Regular is not TrueType or BDF, using MAME default
Region ':os7' created
unzip: opened archive file /home/pi/RetroPie/BIOS/adam.zip
unzip: found /home/pi/RetroPie/BIOS/adam.zip ECD
unzip: /home/pi/RetroPie/BIOS/adam.zip has no ZIP64 ECD locator
unzip: read /home/pi/RetroPie/BIOS/adam.zip central directory
unzip: closing archive file /home/pi/RetroPie/BIOS/adam.zip and sending to cache
Region ':boot' created
unzip: found /home/pi/RetroPie/BIOS/adam.zip in cache
unzip: opened archive file /home/pi/RetroPie/BIOS/adam.zip
unzip: closing archive file /home/pi/RetroPie/BIOS/adam.zip and sending to cache
unzip: found /home/pi/RetroPie/BIOS/adam.zip in cache
unzip: opened archive file /home/pi/RetroPie/BIOS/adam.zip
unzip: closing archive file /home/pi/RetroPie/BIOS/adam.zip and sending to cache
unzip: found /home/pi/RetroPie/BIOS/adam.zip in cache
unzip: opened archive file /home/pi/RetroPie/BIOS/adam.zip
unzip: closing archive file /home/pi/RetroPie/BIOS/adam.zip and sending to cache
unzip: found /home/pi/RetroPie/BIOS/adam.zip in cache
unzip: opened archive file /home/pi/RetroPie/BIOS/adam.zip
unzip: closing archive file /home/pi/RetroPie/BIOS/adam.zip and sending to cache
unzip: found /home/pi/RetroPie/BIOS/adam.zip in cache
unzip: opened archive file /home/pi/RetroPie/BIOS/adam.zip
unzip: closing archive file /home/pi/RetroPie/BIOS/adam.zip and sending to cache
Region ':u6' created
unzip: found /home/pi/RetroPie/BIOS/adam.zip in cache
unzip: opened archive file /home/pi/RetroPie/BIOS/adam.zip
unzip: closing archive file /home/pi/RetroPie/BIOS/adam.zip and sending to cache
Region ':net1:kb:u2' created
unzip: opened archive file /home/pi/RetroPie/BIOS/adam_kb.zip
unzip: found /home/pi/RetroPie/BIOS/adam_kb.zip ECD
unzip: /home/pi/RetroPie/BIOS/adam_kb.zip has no ZIP64 ECD locator
unzip: read /home/pi/RetroPie/BIOS/adam_kb.zip central directory
unzip: closing archive file /home/pi/RetroPie/BIOS/adam_kb.zip and sending to cache
Region ':net2:prn:u2' created
unzip: opened archive file /home/pi/RetroPie/BIOS/adam_prn.zip
unzip: found /home/pi/RetroPie/BIOS/adam_prn.zip ECD
unzip: /home/pi/RetroPie/BIOS/adam_prn.zip has no ZIP64 ECD locator
unzip: read /home/pi/RetroPie/BIOS/adam_prn.zip central directory
unzip: closing archive file /home/pi/RetroPie/BIOS/adam_prn.zip and sending to cache
Region ':net3:ddp:m6801' created
unzip: opened archive file /home/pi/RetroPie/BIOS/adam_ddp.zip
unzip: found /home/pi/RetroPie/BIOS/adam_ddp.zip ECD
unzip: /home/pi/RetroPie/BIOS/adam_ddp.zip has no ZIP64 ECD locator
unzip: read /home/pi/RetroPie/BIOS/adam_ddp.zip central directory
unzip: closing archive file /home/pi/RetroPie/BIOS/adam_ddp.zip and sending to cache
Region ':net4:fdc:u6' created
unzip: opened archive file /home/pi/RetroPie/BIOS/adam_fdc.zip
unzip: found /home/pi/RetroPie/BIOS/adam_fdc.zip ECD
unzip: /home/pi/RetroPie/BIOS/adam_fdc.zip has no ZIP64 ECD locator
unzip: read /home/pi/RetroPie/BIOS/adam_fdc.zip central directory
unzip: closing archive file /home/pi/RetroPie/BIOS/adam_fdc.zip and sending to cache
Region ':net5:fdc:u6' created
unzip: found /home/pi/RetroPie/BIOS/adam_fdc.zip in cache
unzip: opened archive file /home/pi/RetroPie/BIOS/adam_fdc.zip
unzip: closing archive file /home/pi/RetroPie/BIOS/adam_fdc.zip and sending to cache
wp_r80.rom ROM NEEDS REDUMP
WARNING: the machine might not run correctly.
Optional memory region ':screen' not found
Optional shared pointer ':slot1:adamlink:rom' not found
Optional shared pointer ':slot3:ram:ram' not found
Optional shared pointer ':slot3:ram:rom' not found
Starting Adam ':'
  (missing dependencies; rescheduling)
Starting Zilog Z80 ':u1'
Starting Motorola MC6801 ':u6'
Starting TMS9928A VDP ':tms9928a'
Starting Video Screen ':screen'
Starting Speaker ':mono'
  (missing dependencies; rescheduling)
Starting SN76489A ':u20'
Starting ADAMnet bus ':adamnet'
Starting ADAMnet slot ':net1'
Starting Adam keyboard ':net1:kb'
Starting Motorola MC6801 ':net1:kb:u2'
Starting ADAMnet slot ':net2'
Starting Adam printer ':net2:prn'
Starting Motorola MC6801 ':net2:prn:u2'
Starting ADAMnet slot ':net3'
Starting Adam Digital Data Pack ':net3:ddp'
Starting Motorola MC6801 ':net3:ddp:m6801'
Starting Cassette ':net3:ddp:cassette'
Starting Cassette ':net3:ddp:cassette2'
Starting ADAMnet slot ':net4'
Starting Adam FDC ':net4:fdc'
Starting Motorola MC6801 ':net4:fdc:u6'
Starting Western Digital WD2793 FDC ':net4:fdc:u11'
Starting Floppy drive connector abstraction ':net4:fdc:u11:0'
Starting 5.25" single-sided double density floppy drive ':net4:fdc:u11:0:525ssdd'
Starting Speaker ':net4:fdc:u11:0:525ssdd:flopsndout'
  (missing dependencies; rescheduling)
Starting Floppy sound ':net4:fdc:u11:0:525ssdd:floppysound'
Starting ADAMnet slot ':net5'
Starting Adam FDC ':net5:fdc'
Starting Motorola MC6801 ':net5:fdc:u6'
Starting Western Digital WD2793 FDC ':net5:fdc:u11'
Starting Floppy drive connector abstraction ':net5:fdc:u11:0'
Starting 5.25" single-sided double density floppy drive ':net5:fdc:u11:0:525ssdd'
Starting Speaker ':net5:fdc:u11:0:525ssdd:flopsndout'
  (missing dependencies; rescheduling)
Starting Floppy sound ':net5:fdc:u11:0:525ssdd:floppysound'
Starting ADAMnet slot ':net6'
Starting ADAMnet slot ':net7'
Starting ADAMnet slot ':net8'
Starting ADAMnet slot ':net9'
Starting ADAMnet slot ':net10'
Starting ADAMnet slot ':net11'
Starting ADAMnet slot ':net12'
Starting ADAMnet slot ':net13'
Starting ADAMnet slot ':net14'
Starting ADAMnet slot ':net15'
Starting ColecoVision cartridge port ':cartslot'
Starting ADAM expansion slot ':slot1'
Starting AdamLink modem ':slot1:adamlink'
Starting ADAM expansion slot ':slot2'
Starting ADAM expansion slot ':slot3'
Starting Adam 64KB RAM expansion ':slot3:ram'
Starting ColecoVision control port ':joy1'
Starting ColecoVision Hand Controller ':joy1:hand'
Starting ColecoVision control port ':joy2'
Starting RAM ':ram'
Starting Software List ':colec_cart_list'
Starting Software List ':adam_cart_list'
Starting Software List ':cass_list'
Starting Software List ':flop_list'
Starting Adam ':'
  (missing dependencies; rescheduling)
Starting Speaker ':mono'
Starting Speaker ':net4:fdc:u11:0:525ssdd:flopsndout'
Starting Speaker ':net5:fdc:u11:0:525ssdd:flopsndout'
Starting Adam ':'
Attempting to parse: default.cfg
Attempting to parse: adam.cfg
/opt/retropie/supplementary/runcommand/runcommand.sh: line 1313:  6446 Killed                  /opt/retropie/emulators/mame/mame -rompath /home/pi/RetroPie/BIOS\;/home/pi/RetroPie/roms/adam -cfg_directory /opt/retropie/configs/adam/mame -v -c -ui_active adam -cass1 "/home/pi/RetroPie/roms/adam/Alcazar (1986) (Telegames USA) (ADE-SD DDP Patched).ddp"

This is breaking my brani! lol I cannot figure out why it worked before, doesn't work now, but all my .dsk files still work.

Folly

@TPR said in Old Computer Appreciation Thread:

Where can I find the MAME log file at? I can't seem to find it in any of the more obvious places in my directories.
Here is what my runcommand log file says:

The runcommand.log is the mame log.

Sadly also not working, doesn't seem to be due to the bios files and the emulators.

Not sure either on what the problem could be, I will have to think again on what the problem could be.

I have just checked my log with yours and yours is missing a line like this :

:net3:ddp:cassette: opened image file /home/pi/RetroPie/roms/coleco/adam/ddp-cass/Pitfall! (1987) (Telegames USA) (ADE-SD DDP Patched).ddp with flags=00000003

So somehow it looks that the .ddp file isn't loaded.

Folly

@TPR

Can you try to run it directly from the CLI ?
(press F4 in emulationstation and you should get in the CLI)
And then try to manually load your rom with mame, with this command :

/opt/retropie/emulators/mame/mame -rompath /home/pi/RetroPie/BIOS\;/home/pi/RetroPie/roms/adam -cfg_directory /opt/retropie/configs/adam/mame -v -ui_active adam -cass1 "/home/pi/RetroPie/roms/adam/Alcazar (1986) (Telegames USA) (ADE-SD DDP Patched).ddp"

mitu

@Folly Mame version ?

Folly

@mitu

Yes he uses an old version, but that should not matter.

@TPR
As @mitu suggests you could try to update the mame version and see if that makes a difference.

Anyway, if both suggestions don't work it will take too much time to figure out what the problem is.

I would then suggest that you make a whole new image with the latest retropie-setup and the latest emulators.
I would then recommend to use my project instead of using Valerino's module-scripts :
https://retropie.org.uk/forum/topic/29682/development-of-module-script-generator-for-lr-mess-lr-mame-and-mame-standalone