Another case of hotkeys not working..

WetpantsMcGee

@mediamogul Can I paste it directly or should I use something like pastebin?

mediamogul

If either is too long, use pastebin, if short, use code blocks per https://retropie.org.uk/forum/topic/3/read-this-first. The other required information can be posted straight.

WetpantsMcGee

Pi Model or other hardware: Pi3 Model B
Power Supply used: Yes
RetroPie Version Used (eg 3.6, 3.8.1, 4.1 - do not write latest): 4.2.4
Built From: Pre made SD Image on RetroPie website
USB Devices connected: 1
Controller used: iBuffalo USB SNES
Error messages received: None
Log found in /dev/shm/runcommand.log (if relevant):
Guide used: Every search result on Google for retropie hotkeys not working
File: (File with issue - with FULL path)
Emulator: NES, SNES, Megadrive (All but FBA actually)
Attachment of config files:
How to replicate the problem: Run any emulator except FBA

WetpantsMcGee

retroarch.cfg for FBA

Settings made here will only override settings in the global retroarch.cfg if placed above the #include line

input_remapping_directory = "/opt/retropie/configs/fba/"

#include "/opt/retropie/configs/all/retroarch.cfg"

WetpantsMcGee

retroarch.cfg for SNES

# Settings made here will only override settings in the global retroarch.cfg if placed above the #include line

input_remapping_directory = "/opt/retropie/configs/snes/"
input_enable_hotkey = "nul"
input_enable_hotkey_btn = 8
input_exit_emulator_btn = 9
input_menu_toggle_btn = 1
input_load_state_btn = 2
input_save_state_btn = 5
input_reset_btn = 3
input_state_slot_increase_axis = +0
input_state_slot_decrease_axis = -0
input_volume_up_axis = -1
input_volume_down_axis = +1

#include "/opt/retropie/configs/all/retroarch.cfg"

mediamogul

@WetpantsMcGee

It looks like you might currently have, or at one time had 'save on exit' set in RetroArch.

Try pasting:

Settings made here will only override settings in the global retroarch.cfg if placed above the #include line

input_remapping_directory = "/opt/retropie/configs/snes/"

#include "/opt/retropie/configs/all/retroarch.cfg"

into /opt/retropie/configs/snes/retroarch.cfg
Then paste:

Settings made here will only override settings in the global retroarch.cfg if placed above the #include line

input_remapping_directory = "/opt/retropie/configs/nes/"

#include "/opt/retropie/configs/all/retroarch.cfg"

into /opt/retropie/configs/nes/retroarch.cfg
Then paste:

Settings made here will only override settings in the global retroarch.cfg if placed above the #include line

input_remapping_directory = "/opt/retropie/configs/megadrive/"

#include "/opt/retropie/configs/all/retroarch.cfg"

into /opt/retropie/configs/megadrive/retroarch.cfg

WetpantsMcGee

Ok, I'll give this a try and report back. Thanks!

WetpantsMcGee

Ok, copied and pasted into the appropriate retroarch.cfg files, but still no luck with the hotkeys :(

mediamogul

@WetpantsMcGee

Now post the contents of /opt/retropie/configs/all/retroarch.cfg as well as your particular controller config located at /opt/retropie/configs/all/retroarch/autoconfig/ and let's see what shows up there.

mediamogul

@WetpantsMcGee

Also, open up the retroarch.cfg file for whatever system you just tested to see if what you pasted is still there.

WetpantsMcGee

https://pastebin.com/embed_js/b2LJM1P5

WetpantsMcGee

I checked the udev folder under /op/retropie/configs/all/retroarch/autoconfig/ and it is empty :( So I am lacking a .cfg for my particular controller.

mediamogul

@WetpantsMcGee

Try re-configuring your controller through Emulation Station and check to see if it is created at that location.

WetpantsMcGee

@mediamogul Looks like that did it! I had tried reconfiguring it before but to no avail. Just tested it on all systems and I have menu access and can exit to ES!

Thanks so much! I feel so much better now.

mediamogul

@WetpantsMcGee

Good to hear. Welcome to the forums btw.