crt-pi-vertical.glslp issue / horizontal lines only

FlyingTomahawk

@dankcushions said in crt-pi-vertical.glslp issue / horizontal lines only:

i will try 1942 in fba tomorrow and see if it produces vertical scanlines. i thought lr-fbalpha correctly rotated through the api so it should, but i can check.

Thank you.

simonster

@flyingtomahawk said in crt-pi-vertical.glslp issue / horizontal lines only:

And after 50+ views I thought I ask if really no one could spare those 5 minutes to test and confirm.
I am here every day and I see how many users are online and it seems to me that there are plenty of people that have a bit time to spare.

I appreciate how frustrating that can be. The problem is that most people outside the development team, unless they use the specific module/emulator/shader that you are having issues with, are probably unlikely to want to do anything that may disturb their current setup. So of those users on here, only a limited number will probably ever try anything like that. I have a spare Pi3 and 2 sd cards which I write images from the site to for testing purposes, so I had a setup I could try it with.

I apologise if you think I was being rude, but if you've spent any time here, you must see how many posts there are where the first reply is: "Can you complete the information?". The emulator is important, equally some of the most bizarre issues are caused by using an under-powered PSU.

I must say that in my "live" system, I use overlays rather than shaders unless I want the barrel distortion effect as I've found that the overlays use far less CPU in general.

As suggested by @dankcushions I've loaded 1942 Rev B into lr-fbalpha and the scanlines do rotate to vertical correctly, which games are you experiencing issues with?

FlyingTomahawk

@simonster

I get the same result with every vertical shooter game that I have currently setup. I have 2 systems only at the moment, NeoGeo and Capcom Play System.
Games like 1941, 1944, 19xx, Alpha Mission 2, Varth, Strikers 1945 Plus and a few others.
I haven't changed anything, I just load the game and then access the Retroarch menu to load the shader.
Is there anything specific that I have to do? Change resolution manually?

simonster

I tried changing the screen size in RetroArch and that didn't make a difference, so I think it can only be how the emulator is interpreting the rom. It isn't down to the viewport size being portrait or landscape (I can stretch 1942 to 16:9) and it still shows vertical lines. Can you try getting hold of a copy of 1942 (Rev B) for the correct romset on fbalpha and try that. It seems to work correctly for me using an Rpi3 and the current image.

If this works, it is obviously down to the rom/emulator combination not flagging it correctly. I will note though that the vertical scanlines are very close together when rendered on a 16:9 monitor (to the point I was getting banding in the colours at 1920x1080 on 1942).

FlyingTomahawk

@simonster

Will do that, thanks.
I should have that rom somewhere.
I'll test it today after I get back from work and report back.

dankcushions

i've tested it as well. works fine. are you 100% sure you're using 'lr-fbalpha' (there is another lr-fba emulator in retropie). i don't think using the right rom will make a difference (the wrong rom wouldn't load at all). you can't bypass the rotational code on a default retropie install. i'm not you can bypass it at all in lr-fbalpha without the game appearing the wrong way around.

FlyingTomahawk

@dankcushions

Last time I checked, yes it is the lr-fbalpha emulator I am using (v0.2.97.39). But I'll check again and confirm that too.
I only use lr-fbalpha2012 for one game, R-Type2, which wouldn't run with lr-fbalpha. And I don't use pifba which leaves only lr-fbalpha.

I never tried 1942 (Rev B) before. I also could try Donpachi or Dodonpachi which "should" be 100% vertical.

dankcushions

@flyingtomahawk said in crt-pi-vertical.glslp issue / horizontal lines only:

@dankcushions

Last time I checked, yes it is the lr-fbalpha emulator I am using (v0.2.97.39). But I'll check again and confirm that too.
I only use lr-fbalpha2012 for one game, R-Type2, which wouldn't run with lr-fbalpha.

r-type2 has run for in lr-falpha for about a year. fbalpha is also on v.0.2.97.42 now. it sounds like you're running quite an old version, although it shouldn't make a difference for rotation.

FlyingTomahawk

@simonster said in crt-pi-vertical.glslp issue / horizontal lines only:

I must say that in my "live" system, I use overlays rather than shaders unless I want the barrel distortion effect as I've found that the overlays use far less CPU in general.

Me too at least for the vertical stuff I am using an overlay. I did compare overlay vs crt-pi for horizontal and the crt-pi shader looked a bit smoother but it does use more CPU power which can, sometimes, cause slow downs on games like Street Fighter III - 3rd strike or other SF games.
I most likely will revert back to overlays for horizontal too for performance sake.

Curious, what overlay(s) are you using?

I use these here by ruckage.

FlyingTomahawk

@dankcushions @simonster

I just tested it with the following roms

Raiden
Raiden II
Raiden DX
Donpachi
DoDonpachi
1942 (revision B)
Gunbird
Gunbird 2

and all show vertical lines when I load the crt-pi-vertical shader.
So I must have been unlucky because I tried roms like 1941, 1944 and 19xx and all of them don't load those vertical lines.
It is good to know that the vertical shader actually works if you use the right emulator and rom.

Thanks for the help. Something new learned again.

simonster

@flyingtomahawk said in crt-pi-vertical.glslp issue / horizontal lines only:

Curious, what overlay(s) are you using?

I have a set of arcade overlays that I got about 18 months ago. They all have machine bezels inside a fake cabinet with a background of an arcade along each side. I can't remember where they came from, but the screen in some of the images even has scratches and scuffs on it for authenticity.