New Hypseus and lr-Daphne to add on Retropie-Setup

johnodon

@grant2258 said in Hypseus new Daphne fork to try on Retropie:

you should be here
git reset --hard origin/master
HEAD is now at d49829b add sound files tro content path

This is what master shows on github...

Latest commit 6ee0e67 6 hours ago

grant2258

please run the bin from the compiled directory or do a

make && cp /daphne_libretro.so /opt/retropie/libretrocores/lr-daphne/daphne_libretro.so

it look like you bin is pre that commit. The segfault is normal for now on a fail it needs intergrated into retroarch more

johnodon

Running /opt/retropie/emulators/retroarch/bin/retroarch -L /home/pi/daphne/daphne_libretro.so --config /opt/retropie/configs/all/retroarch.cfg /home/pi/RetroPie/roms/daphne/roms/lair.zip --verbose produces the same fault.

FYI...from what I can see, my compiled bin is at the same level as what is currently on master (5 hours old). The commit you are referring to is from 16 hours ago (https://github.com/libretro/daphne/commit/d49829b16aa23197fefa9db7bad3133c3511815c)

grant2258

ok do this
cp -R ~/daphne/assets/sound ./sound

/opt/retropie/emulators/retroarch/bin/retroarch -L /home/pi/daphne/daphne_libretro.so --config /opt/retropie/configs/all/retroarch.cfg /home/pi/RetroPie/roms/daphne/roms/lair.zip --verbose

if this works its pre this pull req

johnodon

@grant2258 said in Hypseus new Daphne fork to try on Retropie:

ok do this
cp -R ~/daphne/assets/sound ./sound

/opt/retropie/emulators/retroarch/bin/retroarch -L /home/pi/daphne/daphne_libretro.so --config /opt/retropie/configs/all/retroarch.cfg /home/pi/RetroPie/roms/daphne/roms/lair.zip --verbose

if this works its pre this pull req

That launched! :)

No sound though (probably expected?).

grant2258

@johnodon yes that is expected your bin is pre that pull req please do a make clean make then copy new bin over. Its still experimental stages no eta for audio ect . Right now im worried about this freeze

johnodon

@grant2258 said in Hypseus new Daphne fork to try on Retropie:

@johnodon yes that is expected your bin is pre that pull req please do a make clean make then copy new bin over. Its still experimental stages no eta for audio ect . Right now im worried about this freeze

Understood. Thanks for the help!

grant2258

@johnodon no problems at all a new bug was pointed out believe it or not it should create the .dat if is doesnt exist . Ill look into that one and i found the problem for the saveme.wav ill fix that too if in a different part of the code

johnodon

So wait...does the bin with the commit in question look for assets/sounds in the same location as the bin itself? Your instructions above have the assets/sounds being copied to the daphne folder...

cp -R assets/pics ~/RetroPie/roms/daphne/
cp -R assets/sound ~/RetroPie/roms/daphne/
mkdir ~/RetroPie/roms/daphne/framefile/

However, the command that fixed this seems to indicate that they should be where the bin is: cp -R ~/daphne/assets/sound ./sound (in this case when launching the bin from the compile dir)

grant2258

im doing the fix for this now teh saveme wave is loaded somewhere else

johnodon

@grant2258 said in Hypseus new Daphne fork to try on Retropie:

im doing the fix for this now teh saveme wave is loaded somewhere else

I see your PR.

grant2258

@johnodon yes its been tested and fixed a lot of the paths where hardcoded to pwd ie teh directory your in when emulator runs. These all needed changed to contents dir for libretro. Ill look into the .dat crash when i get the time

johnodon

OK...I have a clean clone image of my machine. I'm going to restore it so I am back at a blank slate.

grant2258

@johnodon this wont effect your system at all just delete any files youve added. That just updating compiling the emulator. The sdl compile is another task in itself,

johnodon

@grant2258

Once the fix is committed, is this still correct?

cp -R assets/pics ~/RetroPie/roms/daphne/
cp -R assets/sound ~/RetroPie/roms/daphne/

grant2258

yes the saveme was was loaded separately it only the one wav that was the problem

johnodon

@grant2258 Didn't feel like waiting... :)

I compiled from your git (90f4a2c) and it worked straight away!

pjft

@grant2258 apologies for interrupting as I've been out for a while and it's not clear from the thread. First of all, great job in working this into libretro!

Is there any added compatibility versus the default Daphne we currently have on RetroPie? I'm specifically looking for Road Blaster compatibility as the PSX version is fine but the video quality is poor.

grant2258

its not me doing the leg work on this its twin alphix. Im just doing little clean ups I would like to get it to a testable /usable state even withut sound atm. The core is identical atm doesnt mean bug fixes cant come though. Older emulators tend to get some loving when the libretroed up

johnodon

@grant2258 said in Hypseus new Daphne fork to try on Retropie:

its not me doing the leg work on this its twin alphix. Im just doing little clean ups I would like to get it to a testable /usable state even withut sound atm. The core is identical atm doesnt mean bug fixes cant come though. Older emulators tend to get some loving when the libretroed up

Also compatible with x86. :D