Playstation 1 controls are working except for Diablo 1 plese help

[zhajdu]

Pi Model or other hardware: 3 B i think(aliexpress is not quite straitfowrad)
Power Supply used: 3 A ; https://www.aliexpress.com/item/Raspberry-Pi-3-Model-B-Plus-Starter-Kit-ABS-Case-16-32-GB-SD-Card-3A/32832744933.html
RetroPie Version Used: 4.3
Built From:Retropie version 4.3, no image was used
USB Devices connected: 2x Dragonrise zero delay controllers in slot 1 and 2 on Pi. (joysticsks are connected with 5 pin cable) USB extension with 3 holes with 2 SNES like usb controllers. No other devices used
https://www.aliexpress.com/item/G3-Office-Computer-Desk-Round-Hole-USB-Splitter-USB-Hubs-Converter-Laptop-PC-Mac-Expansion-Interface/32885072444.html
https://www.aliexpress.com/item/USB-Controller-Gaming-Joystick-Gamepad-Controller-for-Nintendo-SNES-Game-pad-for-Windows-PC-For-MAC/32863906297.html
https://www.aliexpress.com/item/Free-Shipping-2-Player-Zero-Delay-MAME-Cabinet-DIY-Kits-Parts-Encoder-8-Way-Joystick-20x/32657362835.html
Error messages received: No error message

Problem is that play station controllers are working for all the roms only not for diablo. Do you have an ide what to do? should i configure it in retroarch?

[mitu]

@zhajdu said in Playstation 1 controls are working except for Diablo 1 plese help:

Problem is that play station controllers are working for all the roms only not for diablo.

You don't have any PS controllers in the list you posted. Do you mean controls in Playstation games ? If yes, then some PS1 games require an analog controller present and they don't respond to controls if they don't detect one. Use RetroArch gui to switch the controller (RetroPad) to analog + digital - see https://retropie.org.uk/docs/Playstation-1/#analog-controller-type.

[zhajdu]

@mitu thank you

[aewoodall520]

You need to download the psx bios scph1001.bin

[mitu]

@aewoodall520 Please don't post to years old topics, and without adding any useful information to it.

[Blixa]

@mitu Hello there, just wanted to point out his advice was the only one that helped me after two days of searching.

[mitu]

@blixa So you had the same issue as @zhajdu and only the reply from @aewoodall520 has provided the solution ? The PS1 doc page already has the same info - https://retropie.org.uk/docs/Playstation-1/#bios.

[Blixa]

@mitu Yes. And you are right. Unfortunatelly I did not realize each emulated system needs it's BIOS. It was indeed written in the link that was provided. I was looking for a specific controller problem and being new to the whole raspberry thing, I overlooked that information.
@aewoodall520 just happened to point out the thing I was missing.

P.S.: After updating the ES, I had to reconfigure the controlls for PSX again. It was a breeze thanks to your link, thank you.