Is there a simple way to make DragonRise controllers work with Daphne??

kmorreison

When I get home I will try again and if it gives me any problems I will try to put some image around here. Thanks for u time

What program use to connect for ssh?? Need that for copy paste rigth?

grant2258

@kmorreison yes I use a program called putty

kmorreison

I hope it is not very complicated to use putty, I have never used any of this

kmorreison

@grant2258 Greetings again, the truth I am a little sad because I do not know what is happening and it is frustrating lol. It seems that everything is installing well until a moment comes to a stop and tells me this, I attach the photo.

https://imgur.com/a/1zbJFMH

Sorry but it seems that I will not add photos to be seen in the forum ...

That finish say /tmp/build/daphne/daphne.bin not found, and stoped...

I know that you are the only person who can help me in this world and I am super grateful for the time dedicated.

Wouldn't it be possible somehow to pass me the already compiled files or folders to see if I would make it work? I don't understand why it gives me that failure = (

kmorreison

This post is deleted!

grant2258

@kmorreison if you paste all them lines at the same time it will fail. Paste one at a time

kmorreison

@grant2258 i just paste one for one and wen ise build line get that fail after some minuts. I paste one at a time allways. Yesterday i use putty for copy and paste lines.

Now I am already at work, I paste one by one and when I use the one of install, after who seems to be compiling everything well, after a few minutes that phrase comes out. U check screen?

Wouldn't it be possible to try to pass the files to me? I would be eternally grateful to him.

If not, I don't know what else to do, try to install a retropie from scratch and try.

kmorreison

The case is that doing it line by line that when I launch the install ends up giving that problem after working a long time.

I give u my email if are needed to help me pls.

kmorreison

@grant2258 wen use install that copy all files from /tmp... to /opt/emulators but wen try find a daphne.bin cant found that file. Thanks again

grant2258

@kmorreison said in Is there a simple way to make DragonRise controllers work with Daphne??:

@grant2258 wen use install that copy all files from /tmp... to /opt/emulators but wen try find a daphne.bin cant found that file. Thanks again

do this

cd /home/pi/RetroPie-Setup/
sudo ./retropie_packages.sh daphne clean
git clone https://github.com/grant2258/daphne-emu.git tmp/build/daphne
sudo ./retropie_packages.sh daphne depends
sudo ./retropie_packages.sh daphne build

paste any errors

edit: somone had issues compiling so ive added a sudo ./retropie_packages.sh daphne clean at the start to clean any source that might be there causing issues

kmorreison

Tonight when I get home I try it. Once I make those lines that you give me if I did not give errors, should I do something else? Or would it be installed?

If I am not mistaken when making those lines I did not throw any error yesterday, the problem occurred when putting the install one, tonight at home I confirm now I am at work.

Thanks for your time indeed.

grant2258

if you get no errors we will take it from there more does need done but one thing at a time

kmorreison

@grant2258 I get home in 6h just try it and tell you here, thanks for everything

kmorreison

@grant2258 I just did the process that you told me and it seems that everything went well, it doesn't seem to have any error =)

I am attaching a video of the process for you to tell me, I await your response and how to continue! It still has poor quality because YouTube takes a while to put more quality ...

Thanks again for everything

grant2258

now do a

cd /home/pi/RetroPie-Setup/
sudo ./retropie_packages.sh daphne install
sudo ./retropie_packages.sh daphne configure

kmorreison

@grant2258 at last!! I finish everything correct without throwing errors. I just tried Dragon Lair and it works perfectly !! I can not believe it!!

I don't know how to really thank you!

If I make a backup of the image, when I copy it to another sd card it would work the same, right?

grant2258

@kmorreison said in Is there a simple way to make DragonRise controllers work with Daphne??:

@grant2258 at last!! I finish everything correct without throwing errors. I just tried Dragon Lair and it works perfectly !! I can not believe it!!

I don't know how to really thank you!

If I make a backup of the image, when I copy it to another sd card it would work the same, right?

youve already thanked me many times its no problem. Yes you can copy the binary.

But dont worry it will compile fine again we just added a sudo ./retropie_packages.sh daphne clean to the start of the original instructions this cleans what was already in this folder. This fixes more than dragonrise it fixes normal controllers as well enjoy!

kmorreison

@grant2258 u are the best.

tafaz73

Hello @grant2258 ,
I have tried to install daphne as you suggest, but at the end of buikd creation i got these errors

g++: error: vldp2/libmpeg2/cpu_accel.o: No such file or directory
g++: error: vldp2/libmpeg2/alloc.o: No such file or directory
g++: error: vldp2/libmpeg2/cpu_state.o: No such file or directory
g++: error: vldp2/libmpeg2/decode.o: No such file or directory
g++: error: vldp2/libmpeg2/header.o: No such file or directory
g++: error: vldp2/libmpeg2/motion_comp.o: No such file or directory
g++: error: vldp2/libmpeg2/idct.o: No such file or directory
g++: error: vldp2/libmpeg2/idct_mmx.o: No such file or directory
g++: error: vldp2/libmpeg2/motion_comp_mmx.o: No such file or directory
g++: error: vldp2/libmpeg2/slice.o: No such file or directory
g++: error: vldp2/libvo/video_out.o: No such file or directory
g++: error: vldp2/libvo/video_out_null.o: No such file or directory

Looks like I miss some files.
My retropie version is 4.6.1
Could you help me?
Thank you

scenarioL113

I registered just so I could thank you for solving this problem for me. It was mind boggling that the joystick would not cork correctly. Some moves would work but then other would not and they would also not work consistently.

This fix works PERFECT 100%%%

I was joking with myself that "this will NOT work for me..." BUT IT DID!!!

YOU ARE THE MAN!!!

I ran this on my acrade1up build running a RPI B3+ thru emulationstation. That is just for reference and to keep the thread alive for others who encounter the same problem.

I honestly do not know or really understand where the compiling data comes from that you suggest and why it is not in the current build when you install Daphne from "source"... I am not copmplaing by any means bc I know people do this stuff and do not get paid for it and people like me reap the benefits...Kudos and THANK YOU VERY MUCH!