Please do not post a support request without first reading and following the advice in

  • Pi Model or other hardware: (B, B+, 2 B, 3, X86 PC etc..). Raspberry Pi 3 B+
    Power Supply used: (If using a Pi) Standard
    RetroPie Version Used (eg 3.6, 3.8.1, 4.1 - do not write latest):4.5
    Built From: (Pre made SD Image on RetroPie website, Berryboot, or on top of existing OS etc.. - please provide the filename of any image used) Premade SD image
    USB Devices connected: Arcade Joystick/Button combos x 2
    Controller used: Arcade Joystick/Button Combos

    I have a strange problem with my mapping for Ultimate Mortal Kombat 3. I have an arcade 1up cabinet with mods for joystick and buttons for 2 players. I have re-mapped the buttons for the standard UMK3 configuration on my arcade box. The buttons work fine for player 1 and player 2 after I remapped and saved the core remap file. The problem is that the joystick for player 1 will register down, left and right but not up. The joystick works fine with up, down, left and right for player 2 using the exact same re-mapping that I use for player 1. When I change the up mapping for player 1 to "Joystick Down" that works fine. There is no problems that I can detect from a hardware standpoint on player 1 joystick.
    I am having difficulty troubleshooting why this one direction only on player 1 does not work. Thanks for any assistance you can offer.

    ![alt text](IMG_0056.jpg image url)IMG_2604.jpg

  • Does anyone have any idea why the mapping for the up motion on joystick would be different for player 1 than player 2? This problem only occurs on ultimate mortal kombat. I'm sure the joysticks are wired properly.

Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.

Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.