Development of module-script generator for lr-mess, lr-mame and mame standalone

Folly

I added these all_in1 drivers to the 280 database.

Folly

Updated to 281.

duglor

@Folly Pardon the interupton.

But I'd like to play Bubsy in lr-Mess-Jaguar emulator. Is that still MAME based? I have heard that Bubsy plays at a much faster speed than virtual jaguar with MESS in Retropie 4.x.

I have a bios called jagboot.zip and jagboot.rom is my bios folder.

Now....so far i have not been able to run the Bubsy .j64, the .j64 in the bubsy folder, or the bubsy.zip with lr-mess-jaguar chosen as my emulator. It just kicks me out.

Any help would be appreciated. Thank you very much.

p.s. btw, all my bubsy names in the folder are lower case. -Doug

DTEAM

@duglor

To have a good gaming experience on Atari Jaguar, I use Retropie on 64 bit and Vulkan. On 32 bit the experience is bad for Atari Jaguar. Bubsy goes 60 FPS with lr-virtualjaguar and MAME standalone.

DTEAM

@Folly
MAME 0.281

Folly

@DTEAM

Added throwbck to all_in1 in the database for 281.

DTEAM

@Folly

SEGA Model 2 works very well on MAME standalone. You need recent roms to do it. It's at full speed or almost and the sound is a little bit choppy (Daytona).

I have try this in the mame.ini file (no impact or little),:

video bgfx
bgfx_path /opt/retropie/emulators/mame/bgfx
bgfx_backend vulkan
bgfx_screen_chains default

Did I make an error?

I read that you're supposed to enable

MESA_VK_WSI_PRESENT_MODE = relaxed

in a .sh file before loading MAME, but I have no idea how to do it. I don't know if it's necessary. Can you try it please?

Folly

@DTEAM

I just tried in the terminal but it does not seem to have any impact.

pi@debian-13:~$ MESA_VK_WSI_PRESENT_MODE = relaxed
bash: MESA_VK_WSI_PRESENT_MODE: command not found
pi@debian-13:~$ MESA_VK_WSI_PRESENT_MODE=relaxed
pi@debian-13:~$ /opt/retropie/emulators/mame/mame daytona
Average speed: 82.30% (50 seconds)
pi@debian-13:~$ echo $MESA_VK_WSI_PRESENT_MODE
relaxed

First line does not work because of spaces.
Second line works and changes the environment variable.
Then I run daytona
In the last line you see that the variable is still contains relaxed.

This is without :

pi@debian-13:~$ echo $MESA_VK_WSI_PRESENT_MODE

pi@debian-13:~$ /opt/retropie/emulators/mame/mame daytona
Average speed: 83.69% (47 seconds)

Empty line means that the variable is empty.
You see it makes no difference.

Folly

@DTEAM said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

I have try this in the mame.ini file (no impact or little),:

video bgfx
bgfx_path /opt/retropie/emulators/mame/bgfx
bgfx_backend vulkan

bgfx_screen_chains default

Did I make an error?

I honestly do not know.

Folly

@DTEAM said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

SEGA Model 2 works very well on MAME standalone. You need recent roms to do it. It's at full speed or almost and the sound is a little bit choppy (Daytona).

I tried more games and indeed they work pretty well, however i am using a x86_64 laptop with 3.5Ghz cpu.
I like hotd, though you have to use the service button first to change the local settings.
And if you want to shoot with the mouse you have to enable that in the mame.ini (mouse = 1).
To refill your gun you need to aim to the edge of the screen and shoot (I think).

DTEAM

@Folly said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

@DTEAM said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

SEGA Model 2 works very well on MAME standalone. You need recent roms to do it. It's at full speed or almost and the sound is a little bit choppy (Daytona).

I tried more games and indeed they work pretty well, however i am using a x86_64 laptop with 3.5Ghz cpu.
I like hotd, though you have to use the service button first to change the local settings.
And if you want to shoot with the mouse you have to enable that in the mame.ini (mouse = 1).
To refill your gun you need to aim to the edge of the screen and shoot (I think).

For Sega Model 2 with MAME, some games have sound issues (choppy) and slightly speed issues, but some games like Dynamite Cop, Manx TT, OverRev (better graphics with Vulkan), Sega Water Ski, Sky Target, The House of death, VirtuaCop 2, Wave Runner and more work perfectly on a Pi5 (64 bit) !!!! It's impressive.

New edit: I added this in my mame.ini file:

video bgfx
bgfx_path /opt/retropie/emulators/mame/bgfx
bgfx_backend vulkan
bgfx_screen_chains default
video accel
syncrefresh 1

#samplerate 11025
#samplerate 22050
samplerate 44100
#samplerate 48000

mouse 1
multimouse 1

For some games, I reduced the sound quality a little bit. Some games run well at 48000 and you don't need to do that.

Folly

@DTEAM

Do you use frameskipping too?

DTEAM

@Folly said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

@DTEAM

Do you use frameskipping too?

No

Folly

Mame binary for Trixie aarch64 for rpi 3,4 and 5 has been added

duglor

@DTEAM @Folly How do you/ can you get Pc98 hdi disks to run under MAME standalone in the retropie? or Lr-Mame, etc? There is a pc98 game outside retropie that works with Mame but not NP2kai. On Retropie 4.X it also does not run under NP2Kai. I was wondering if I can/could test it with MAME in Retropie?

duglor

@Folly @DTEAM How can I run Bubsy for Jaguar under lr-Mess? or Mame standalone? not virtual Jaguar.

Folly

@duglor

@duglor said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

@Folly @DTEAM How can I run Bubsy for Jaguar under lr-Mess? or Mame standalone? not virtual Jaguar.

Just tried bubsy on jaguar for you.
Sadly the game crashes at the beginning after the exclamation mark appears.
Seems this game doesn't work with mame.

Folly

@duglor said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

@DTEAM @Folly How do you/ can you get Pc98 hdi disks to run under MAME standalone in the retropie? or Lr-Mame, etc?

It could work in mame standalone.
For lr-mame it doesn't work as in retropie lr-mame is arcade only, you would need lr-mess then.

There is a pc98 game outside retropie that works with Mame but not NP2kai. On Retropie 4.X it also does not run under NP2Kai. I was wondering if I can/could test it with MAME in Retropie?

You should be able to install pc9801 with harddisk support OOB from the menu item :
Choose and install systems with default settings
Then use the runcommand mame-pc9801-hard to load the harddrive directly.
It has support for these types of harddrive images :
pc9801 harddisk (hard) .chd .hd .hdv .2mg .hdi

PS.
Not tested but it could work.

DTEAM

@Folly said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

@duglor

@duglor said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

@Folly @DTEAM How can I run Bubsy for Jaguar under lr-Mess? or Mame standalone? not virtual Jaguar.

Just tried bubsy on jaguar for you.
Sadly the game crashes at the beginning after the exclamation mark appears.
Seems this game doesn't work with mame.

Bubsy works well on my side at full speed. I’m using Vulkan with Mame and Lr-virtualjaguar

Folly

@DTEAM said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

@Folly said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

@duglor

@duglor said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

@Folly @DTEAM How can I run Bubsy for Jaguar under lr-Mess? or Mame standalone? not virtual Jaguar.

Just tried bubsy on jaguar for you.
Sadly the game crashes at the beginning after the exclamation mark appears.
Seems this game doesn't work with mame.

Bubsy works well on my side at full speed. I’m using Vulkan with Mame and Lr-virtualjaguar

@DTEAM @duglor
Got it working too.
Pressed a button to start the game before the exclamation mark comes, then I can play.