Development of module-script generator for lr-mess, lr-mame and mame standalone

jamrom2

@folly said in Development of module-script generator for lr-mess and mame standalone:

dragon64

Found it. It was a bug in MESS as suspected. Apparently it looks like it was fixed, but I don't see where it was implemented into MESS/MAME.

If it was, it didn't change anything as it's still happening. I'm presently running .235. This fix was from 2019, which was many versions before .235.

https://github.com/mamedev/mame/pull/4980

https://mametesters.org/view.php?id=7300

Folly

@jamrom2

I have read the links.
It's a lot of information and it looks like the comparison between original and emulated, NTSC vs PAL is constantly mixed in the discussions.
Very confusing but perhaps I have to read it again.

I did try the NTSC test on coco2, dragon32 and dragon 64 from this site :
https://mametesters.org/view.php?id=7300
You can just add it to mame as an autoboot line :

/opt/retropie/emulators/mame/mame dragon64 -autoboot_delay 3 -autoboot_command '10 PMODE4,1:SCREEN 1,1:PCLS1\\\n20 FOR I=0 to 3071:POKE 3072+I,85:NEXT I\\\n30 FOR I=3072 to 6143:POKE 3072+I,170:NEXT I\\\n40 GOTO 40\\\n'

On all machines it produces blue/orange.
Reading the information correct, for PAL, it should produce black and white.
So, at first sight, it seems, the pull request did not fix this.

I did also try the .bas file from "25A - Blending Colors in PAL.VDK" :
archive.worldofdragon.org/phpBB3/viewtopic.php?f=5&t=5462

Producing these colors on dragon32 seems to work ok.

It also states that programs perform differently between systems.
It makes me wonder, reading the information, if the games are written for NTSC only or for PAL only.
If some NTSC games, running on dragon are in black&white, and on a coco in color, then it would mean that the pull request fix is working.
But it would also means that the test in basic, described earlier, is not a good test or I use the wrong POKE as stated there (are you still with me ?) :

Please note that if you don't have the dos cartridge loaded, you have to change the "POKE 3072," instances to "POKE 1536,".

So I did :

/opt/retropie/emulators/mame/mame dragon64 -autoboot_delay 3 -autoboot_command '10 PMODE4,1:SCREEN 1,1:PCLS1\\\n20 FOR I=0 to 3071:POKE 1536+I,85:NEXT I\\\n30 FOR I=3072 to 6143:POKE 1536+I,170:NEXT I\\\n40 GOTO 40\\\n'

Then I get "gray lines".

It would make sense that you post this into the appropriate forum :
https://forums.bannister.org/ubbthreads.php?ubb=postlist&Board=1
That way people, with more knowledge, can take a look at it.

Folly

@DTEAM

I just discovered how to make use of an extra help button.
I already knew how to add it but I didn't know how to extract data when pressing it.

I just got it working.
So now it's possible to remove all the HELP lines.
We can now add HELP to each line and select it with the HELP-button.
More text can be added because a full message box is opened.

I also improved the search in the restricted dl part as it had some issues.

And I added a runcommand.log extractor in the restricted dl part.
So if we run a system with mame or lr-mess without BIOS files we can notice in the runcommand.log.
So this information can be simply extracted.
Then we can use this to build up a matching list against the rompack.
So when we run a500 without roms then runcommand will say it misses : a500.7z, a500kbd_us.7z and a2000kbd_us.7z
If it's found in the rompack than the list will be made for these 3 items to get.

Nice feature isn't it ?

It's not yet on github, I will do this when it's more complete with the help.

Folly

@jamrom2

I found a repository with lua scripts for autobooting.
I did some successful tests.

I forked that repository :
https://github.com/FollyMaddy/RandoMame/tree/main/autoboot_script

Perhaps we can use this for adding autoboot lines using these lua scripts.

What's nice about it, it can automatically press "tape play" and do a run after loading.

I don't know yet how to write these lua scripts.
So I have to experiment.

jamrom2

@folly

Out of my league for sure.. but it looks like a pretty good option if you can get it to work. Remember what we talked about with the DosBox config files.. that would be something similar I imagine where if it sees a specific rom extension, it knows to use a specific load style.

Folly

@DTEAM @jamrom2

I just did a commit with many improvements :

Possible to add HELP to each csv line and select it with the HELP-button.
More HELP text can be added because a full message box is opened.
Improving the search in the restricted dl part as it had some issues
added a runcommand.log extractor in the restricted dl part so missing bios roms can be matched with a rompack dl search
the wget downloads now show a progress bar
the wget lines are improved with some more options, for example, continue

I did not yet add all HELP parts yet, but I wanted to share this with you, both, first.
Now you both can see what is possible.

You can find it here :
https://github.com/FollyMaddy/RetroPie-Share/blob/8d1086cd39f963ae5f0afcecc66d2de2fd55f5fe/00-workdir-00/add-mamedev-systems-0237.sh

Folly

@DTEAM @jamrom2

I had a few issues with the message-box in above version, that I found later on :

message-box not centred
no RetroPie backtitle
scrolling with page-up/page-down did not work
( and therefore adding more text wasn't an option )

The next update will be fixed for this.

@DTEAM
Are you able to make some help texts for the handheld/p&p ?

jamrom2

@folly I've been setting up the Coco3 now using that method of placing the rom in another folder and using the links to point at it.

I found an issue with the auto load command.

using the game Androne and Arena the links named: androne.bin.zip and arena.bin.zip resepectively. It's adding a ".BIN" into the name and using LOAD for both.

Androne is a machine language so it needs the M
It types: LOAD"ANDRONE.BIN", R
It should be: LOADM "ANDRONE" , then EXEC

For BASIC programs it does the same, it adds in the ".BIN" into the name, so it fails. The LOAD statement is correct though as it should just be LOAD "ARENA",R

It's that BASIC and machine language option again...

Folly

@jamrom2

I did a commit and added loadm:exec lines for coco2/3 .
Let me know if it works.

If the file doesn't have an extension then don't add it in the link, that should work.
Then the link for arena should be called : androne.zip (that works for me using loadm"%basename%":exec)
My arena is a .bas and booted with : arena.bas.zip (using run"%basename%")

https://github.com/FollyMaddy/RetroPie-Share/blob/f7d6ea1ce3851bdf4f77ec844dea8beac9c1b441/00-workdir-00/add-mamedev-systems-0237.sh

https://github.com/FollyMaddy/RetroPie-Share/commit/f7d6ea1ce3851bdf4f77ec844dea8beac9c1b441

Folly

@DTEAM

Did you had some time to check out the help-button ?
I would like to know what you think of it.

DTEAM

@folly

No, Sorry for that. I'm pretty busy right now. I'll try to check it next week.

Folly

@dteam

No problem !

I had that feeling you were very busy because normally you are very quick.

Next week, will do. ;-)

jamrom2

@folly Hi. Just wanted to check in and let you know the new script for Tandy Coco Floppy is working great.

Just like you said, name needs to be correct for it to work.

It is a lot of work to get the link setup and naming and all that, but once it's running... no issue. It's worth all the trouble to have these games now with a one click option.

Do you know if there is anything I need to add to make the Joystick work? So far, no matter what I do in MESS or the LR core, I can't get any directional response. Does it need a statement like the Apple IIe did?

thanks!

Folly

@jamrom2

Great to hear,

I was thinking perhaps we can make a basic structure database for creating all the autoboot links.
Something like using the sha1sum from the game-file and what the load command is.
If I have some time I will see if I can automate the idea ( I am not promising anything though ;-) ).
If that's an option we can share the data to automate it.

For the apple2ee I have added a line for "compact flash harddrive" support for the "TotalReplay" harddrive image.
You will see it in the next update when I update it.
TotalReplay will be in the restricted section also.

From the apple2ee "compact flash" add, I learned that mame can also-listmedia from added slotdevices.
So that would mean that, to some degree, it would be possible to automate that in the generating script part.
(which it doesn't do, right now)
Perhaps something for the future !

For the joystick part I will have a look.

Btw.
What is your experience with the added help-button ?
Is it an option that would help in the future ?
(you have to know, not all the lines have help yet, so not all lines will give you something)

jamrom2

@folly I'm not sure about the Help key. I don't know that it will get good use... BUT

I think we're going to have to write very clear instructions on how this is all done at some point. Once others see there is a real "easy" way to run all this, they're going to want to know how and how to make it work on their own sets as well.

How about the DOS OS/9 issue?
When I run let say flight simulator II it needs OS/9.. however the auto command says "DOSN". Needs to say DOS and it will work.

Folly

@jamrom2 @DTEAM

Again, I did a huge update.

You can read all improvements in the commit-link.

I have finally got color artifacting working using balldozer.
We have to use an NTSC tano dragon 64 for that.
I found the driver name searching for (dragon ntsc) in the source code of mame like this :
https://github.com/mamedev/mame/search?q=dragon+ntsc
You will see the tano dragon 64 in dragon.cpp
For using dragon32 floppy files I had to use a dragon floppy controller (dragon_fdc) as extra slot device.
So the dragon32 floppies will only work if tanodr64 is installed from the systems with extras or the autoboot lines section otherwise it will boot with a wrong extended dos version.

I think many issues are resolved now.

Get the latest module-script here (with added autoboot for samcoupe) :
https://github.com/FollyMaddy/RetroPie-Share/blob/1429cc002c398df78464f86f76d73ecb3ea02b48/00-workdir-00/add-mamedev-systems-0237.sh

Here is more about samcoupe in this post :
https://retropie.org.uk/forum/topic/31702/replacement-emulator-available/4

Commit information :
https://github.com/FollyMaddy/RetroPie-Share/commit/e9d5b3dd40c9beb3112785ab0b6d48d4ec004f24
https://github.com/FollyMaddy/RetroPie-Share/commit/7a1d96fecac92c69b5ee47227afb10c0a1266c0c

Folly

Balldozer on tanodr64 :

Folly

@jamrom2 said in Development of module-script generator for lr-mess and mame standalone:

Do you know if there is anything I need to add to make the Joystick work? So far, no matter what I do in MESS or the LR core, I can't get any directional response.

I read this from your post again.
Check with the tab key in input(thismachine) on what keys are associated with the direction.
I remember I had some trouble too on some systems, I think it was apple2.
Sometimes the directional keys are associated with numpad keys.
Hope it helps, otherwise we have to look at it once again.

DTEAM

@folly
Hi Folly,
I'm back to help with the project today. I have reinstalled the handheld systems with your new script and it works fine. I am impressed every time I do this. I couldn't find your help menu. Where is it ?

Another question, which machines are running MSX2.

For help buttons, what kind of infos you want. Handheld description. How to use "basename lines" with MAME.ini. Systems who needs auto-frameskip, etc.

Folly

@dteam said in Development of module-script generator for lr-mess and mame standalone:

@folly
Hi Folly,
I'm back to help with the project today.
I have reinstalled the handheld systems with your new script and it works fine. I am impressed every time I do this.

Very pleased about that !!!

I couldn't find your help menu. Where is it ?

There isn't a help menu.
But in many lines I added some sort of help.
You just have to go to a line and press the help-button beneath.
If the help button doesn't work then there is no "help page" yet.

Another question, which machines are running MSX2.
Sony hbf700p for example.
Added it in the systems with extras.

For help buttons, what kind of infos you want. Handheld description. How to use "basename lines" with MAME.ini. Systems who needs auto-frameskip, etc.

Yes, something like that.
I think that would be a good start ;-)