Controller no longer works in RetroPie Setup, Launching Menu, Es Themes

mitu

@nogz said in Controller no longer works in RetroPie Setup, Launching Menu, Es Themes:

/opt/retropie/supplementary/runcommand/

Are you sure you're running RetroPie 4.7.16 ? The path has changed recently - see my reply above.

nogz

Sorry, I' ve updated to 4.7.18 while trying to fix, used the command with the new path and it is the same:

pi@retropie:~ $ /opt/retropie/admin/joy2key/joy2key_sdl.py kcub1 kcuf1 kcuu1 kcud1 0x0a 0x20 0x1b 0x00 kpp knp -d
-bash: /opt/retropie/admin/joy2key/joy2key_sdl.py: No such file or directory

mitu

@nogz Go in the the core section of the packages in RetroPie-Setup and check if the joy2key module is installed. If it's not, then install it and repeat the test:

nogz

@mitu it was not installed, after installing it everything works fine again

Thanks for the support, really appreciatted!

mitu

@nogz said in Controller no longer works in RetroPie Setup, Launching Menu, Es Themes:

Thanks for the support, really appreciatted!

Well, it's good that you got it working.

Now the question is why it wasn't installed automatically during upgrade ? Do you remember which version you where running before the upgrade that broke the menu navigation ?

nogz

@mitu thanks again
If I am not mistaken my last update was about 2 weeks ago and I was running .16 version.
I am pretty much sure the issue happened when I fetched the latest Retropie Setup Script, from this exact point on the controller stopped working as I could not confirm the prompt (disclaimer message). I can also confirm I have not changed nor updated any of the core modules separately. In Setup.

mitu

@nogz So it was working with 2.7.16, but didn't work after the upgrade ?

@DTEAM @phialek can you try also to check if the new joy2key core package is installed ? If not, install it and see if you get back the control in the RetroPie dialog menus.

nogz

@mitu yes, just like you described

DTEAM

@mitu

With the joy2key core package, it works. It had not been installed. Thank you!!!

phialek

Its working again. Thanks for the help.

Delboy666

@nogz Hi, did you resolve your controller issue? I ask because I just updated Retropie and now my Logitech Gamepad F310 controller has dissapeared :-(
Retropie runs up but I cannot navigate the menus and there are no messages at the bottom of the Retropie screen prompting what controller buttons to press.
I am at a loss and somewhat annoyed as I have spent days and days getting all my roms recognised and artwork downloaded etc and it was at last starting to all come together and now this....

GreenHawk84

@mitu hello, I tried both of the paths in the terminal session and they did not work, and I also checked for Joy2key core package installed (even updated it manually via binary).

root@killerarcadepi4:~# /opt/retropie/admin/joy2key/joy2key_sdl.py
usage: joy2key_sdl.py [-h] [-d] 0xHEX [0xHEX ...]
joy2key_sdl.py: error: the following arguments are required: 0xHEX

root@killerarcadepi4:~# /opt/retropie/supplementary/runcommand/joy2key_sdl.py kcub1 kcuf1 kcuu1 kcud1 0x0a 0x20 0x1b 0x00 kpp knp -d
-bash: /opt/retropie/supplementary/runcommand/joy2key_sdl.py: No such file or directory
root@killerarcadepi4:~#

mitu

@greenhawk84 And your issue is ... ?

GreenHawk84

@mitu oh yes, well my joystick and buttons no longer control the Update menus. I tried the methods suggested here. Unless I missed something ?

mitu

@greenhawk84 said in Controller no longer works in RetroPie Setup, Launching Menu, Es Themes:

Unless I missed something ?

Some context about the problem you have would help (version of RetroPie, type of controller, system, etc.). You seem to have the joy2key package installed, this should be enough to solve the issue reported in this topic.
Do you have any custom start/stop scripts ? Is the controller working in the runcommand launch menu ?

Regarding the commands you tried - your first command was almost correct (but missing arguments), your 2nd is not working since joy2key has now moved (1st command had the path correct, though). If you wish to see if the controller is detected, run (not as root)

/opt/retropie/admin/joy2key/joy2key_sdl.py kcub1 kcuf1 kcuu1 kcud1 0x0a 0x20 0x1b 0x00 kpp knp -d

and then test the controller's buttons and joysticks. To exit the test, run

killall python3

ramb0

Hi all, I'm having similar issues with my debian x86 + retropie and spent now many hours without a result. Basically my xbox 360 controller is not working on launching menu and on retropie setup menus.
Did you guys (who had joy2key installed and controller was not working still) got the controllers working?

I have the above situation. I have tried to debug the issue with the command @mitu provided (BTW thank you very much the support!), but when I launch the joy2key_sdl.py command with the flags I get no response from controller when pressed conrollers buttons. Only line I get is this:
2021-11-29 23:34:23,422 DEBUG Using SDL Version 2.0.8, PySDL2 version 0.9.3.

I fetched RetroPie Setup from git at 11.11.2021 and the last commit is this:
https://github.com/RetroPie/RetroPie-Setup/commit/04a74980e27b23102c015a930e25ad5dcb1f219e
So I assume my retropie version is 4.7.1 or newer.
-I have x86 Linux Mint and have used that repository's "retropie_setup.sh" to install all the packages.
-I have installed all the core packages, joy2key is installed, xpad, xboxdrv, etc
-I'm using Xbox 360 controlled with wireless USB dongle
-The controller works on emulationstation and on retroarch and on all the games but not in runcommand (launching menu, when launching a rom) and not in retropie setup.
-I have installed retropie also on my raspberry pi 3B+ with Raspberry Pi Imager (on sd card) and on that platform the controller is working fine everywhere.

I compared the file "/opt/retropie/supplementary/runcommand/runcommand.sh" with my working raspberry pi and non working linux mint debian and noticed that there are some big changes mainly come from this pull request which have 3 commits:
https://github.com/RetroPie/RetroPie-Setup/pull/3382
Though, not sure has this pull request broke the functionality or not. Although, the changed runcommand.sh does not explain why the controller is not working on retropie setup menu..?

Please, anyone, any idea and advise would be super great and appreciated!!=)

mitu

@ramb0 said in Controller no longer works in RetroPie Setup, Launching Menu, Es Themes:

-I have x86 Linux Mint and have used that repository's "retropie_setup.sh" to install all the packages.

Is it Debian or Linux Mint ? Which version ?

... but when I launch the joy2key_sdl.py command with the flags I get no response from controller when pressed conrollers buttons. Only line I get is this:

2021-11-29 23:34:23,422 DEBUG Using SDL Version 2.0.8, PySDL2 version 0.9.3.

It should also print if any controllers are configured or detected. What version of python3 you have installed ? Run python3 -V and post the output.

ramb0

Hi @mitu,

Thanks for a quick reply!=)

Its Linux Mint debian based, here are more information from version etc:
cat /etc/os-release
NAME="Linux Mint"
VERSION="19.1 (Tessa)"
ID=linuxmint
ID_LIKE=ubuntu
PRETTY_NAME="Linux Mint 19.1"
VERSION_ID="19.1"
HOME_URL="https://www.linuxmint.com/"
SUPPORT_URL="https://forums.linuxmint.com/"
BUG_REPORT_URL="http://linuxmint-troubleshooting-guide.readthedocs.io/en/latest/"
PRIVACY_POLICY_URL="https://www.linuxmint.com/"
VERSION_CODENAME=tessa
UBUNTU_CODENAME=bionic

Here is python3 version:
python3 -V
Python 3.6.9

I made an interesting found. I debugged an older runcommand.sh and found few commands for joy2key so based on that learning I tried to execute the command "/opt/retropie/admin/joy2key/joy2key.py /dev/input/jsX kcub1 kcuf1 kcuu1 kcud1 0x0a 0x09". After the execution when I pressed controller's "A" key, it acted as a "Enter" on linux terminal and also D-pad worked as keyboard arrow keys. So at least my controller seems to work on linux terminal.

mitu

@ramb0 said in Controller no longer works in RetroPie Setup, Launching Menu, Es Themes:

python3 -V
Python 3.6.9

That should be ok.

I made an interesting found. I debugged an older runcommand.sh and found few commands for joy2key so based on that learning I tried to execute the command "/opt/retropie/admin/joy2key/joy2key.py /dev/input/jsX kcub1 kcuf1 kcuu1 kcud1 0x0a 0x09". After the execution when I pressed controller's "A" key, it acted as a "Enter" on linux terminal and also D-pad worked as keyboard arrow keys. So at least my controller seems to work on linux terminal.

That's the old version of joy2key, which doesn't use SDL2. I'm guessing there's an issue with the SDL version you have, it's a bit older than what's on the RPI. Any reason you're using an older Linux Mint version ?

ramb0

@mitu

I just checked the old joy2key command from my older retro pi installation on my raspberry pi. But on my Linux Mint retropi I should have pretty much the newest retropi installed including joy2key.

@mitu said in Controller no longer works in RetroPie Setup, Launching Menu, Es Themes:

I'm guessing there's an issue with the SDL version you have

Just checked that SDL2 was not installed on my Linux Mint retropi, so I installed it -> rebooted and still controller is not working.

@mitu said in Controller no longer works in RetroPie Setup, Launching Menu, Es Themes:

Any reason you're using an older Linux Mint version ?

No reason. I guess Im just being lazy to do all the backups before the upgrade. Do you assume that this older version of linux mint have bad impact to this issue?