Psx emulator controls not working
-
@mtlhd1011 have you turned off or rebooted the device since the log was created?
/dev/shm
is a virtual location that only exists in memory in order to reduce unnecessary read/write operations to the SD card, and does not persist from one session to another. You're on the right track, you should just repeat the process, all at once: enable the verbose log, recreate the problem, then immediately go and fetch the log. -
@sleve_mcdichael Ah thank you, that was the issue, I shut off the system, I did not know these logs don't hang around. I am new to this stuff so you'll have to forgive me, but I am willing to learn whatever I can if you wish to show me. Ok so here is the log info below.
\ \ \
Parameters:
Executing: /opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-pcsx-rearmed/pcsx_rearmed_libretro.so --config /opt/retropie/configs/psx/retroarch.cfg "/home/pi/RetroPie/roms/psx/MediEvil (USA).PBP" --verbose --appendconfig /dev/shm/retroarch.cfg
[INFO] RetroArch 1.7.5 (Git c9c6c5a)
[INFO] Redirecting save file to "/home/pi/RetroPie/roms/psx/MediEvil (USA).srm".
[INFO] Redirecting savestate to "/home/pi/RetroPie/roms/psx/MediEvil (USA).state".
[INFO] === Build =======================================
Capabilities: NEON VFPv3 VFPv4
Built: Oct 9 2018
[INFO] Version: 1.7.5
[INFO] Git: c9c6c5a
[INFO] =================================================
[INFO] Loading dynamic libretro core from: "/opt/retropie/libretrocores/lr-pcsx-rearmed/pcsx_rearmed_libretro.so"
[INFO] [overrides] no core-specific overrides found at /home/pi/.config/retroarch/config/PCSX-ReARMed/PCSX-ReARMed.cfg.
[INFO] [overrides] no content-dir-specific overrides found at /home/pi/.config/retroarch/config/PCSX-ReARMed/psx.cfg.
[INFO] [overrides] no game-specific overrides found at /home/pi/.config/retroarch/config/PCSX-ReARMed/MediEvil (USA).cfg.
[INFO] Shaders: preset directory: /home/pi/.config/retroarch/shaders/presets
[INFO] Shaders: no game-specific preset found at /home/pi/.config/retroarch/shaders/presets/PCSX-ReARMed/MediEvil (USA).cgp.
[INFO] Shaders: no game-specific preset found at /home/pi/.config/retroarch/shaders/presets/PCSX-ReARMed/MediEvil (USA).glslp.
[INFO] Shaders: no content-dir-specific preset found at /home/pi/.config/retroarch/shaders/presets/PCSX-ReARMed/psx.cgp.
[INFO] Shaders: no content-dir-specific preset found at /home/pi/.config/retroarch/shaders/presets/PCSX-ReARMed/psx.glslp.
[INFO] Shaders: no core-specific preset found at /home/pi/.config/retroarch/shaders/presets/PCSX-ReARMed/PCSX-ReARMed.cgp.
[INFO] Shaders: no core-specific preset found at /home/pi/.config/retroarch/shaders/presets/PCSX-ReARMed/PCSX-ReARMed.glslp.
[INFO] Environ GET_LOG_INTERFACE.
[INFO] Environ SET_CONTROLLER_INFO.
[INFO] Controller port: 1
[INFO] standard (ID: 1)
[INFO] analog (ID: 261)
[INFO] dualshock (ID: 517)
[INFO] negcon (ID: 773)
[INFO] guncon (ID: 260)
[INFO] mouse (ID: 258)
[INFO] (null) (ID: 0)
[INFO] Controller port: 2
[INFO] standard (ID: 1)
[INFO] analog (ID: 261)
[INFO] dualshock (ID: 517)
[INFO] negcon (ID: 773)
[INFO] guncon (ID: 260)
[INFO] mouse (ID: 258)
[INFO] (null) (ID: 0)
[INFO] Controller port: 3
[INFO] standard (ID: 1)
[INFO] analog (ID: 261)
[INFO] dualshock (ID: 517)
[INFO] negcon (ID: 773)
[INFO] guncon (ID: 260)
[INFO] mouse (ID: 258)
[INFO] (null) (ID: 0)
[INFO] Controller port: 4
[INFO] standard (ID: 1)
[INFO] analog (ID: 261)
[INFO] dualshock (ID: 517)
[INFO] negcon (ID: 773)
[INFO] guncon (ID: 260)
[INFO] mouse (ID: 258)
[INFO] (null) (ID: 0)
[INFO] Controller port: 5
[INFO] standard (ID: 1)
[INFO] analog (ID: 261)
[INFO] dualshock (ID: 517)
[INFO] negcon (ID: 773)
[INFO] guncon (ID: 260)
[INFO] mouse (ID: 258)
[INFO] (null) (ID: 0)
[INFO] Controller port: 6
[INFO] standard (ID: 1)
[INFO] analog (ID: 261)
[INFO] dualshock (ID: 517)
[INFO] negcon (ID: 773)
[INFO] guncon (ID: 260)
[INFO] mouse (ID: 258)
[INFO] (null) (ID: 0)
[INFO] Controller port: 7
[INFO] standard (ID: 1)
[INFO] analog (ID: 261)
[INFO] dualshock (ID: 517)
[INFO] negcon (ID: 773)
[INFO] guncon (ID: 260)
[INFO] mouse (ID: 258)
[INFO] (null) (ID: 0)
[INFO] Controller port: 8
[INFO] standard (ID: 1)
[INFO] analog (ID: 261)
[INFO] dualshock (ID: 517)
[INFO] negcon (ID: 773)
[INFO] guncon (ID: 260)
[INFO] mouse (ID: 258)
[INFO] (null) (ID: 0)
[INFO] Environ UNSUPPORTED (#52).
[INFO] Environ SET_VARIABLES.
[INFO] Remaps: remap directory: /opt/retropie/configs/psx/
[INFO] Remaps: no game-specific remap found at /opt/retropie/configs/psx/PCSX-ReARMed/MediEvil (USA).rmp.
[INFO] Remaps: no content-dir-specific remap found at /opt/retropie/configs/psx/PCSX-ReARMed/psx.rmp.
[INFO] Remaps: no core-specific remap found at /opt/retropie/configs/psx/PCSX-ReARMed/PCSX-ReARMed.rmp.
[INFO] Redirecting save file to "/home/pi/RetroPie/roms/psx/MediEvil (USA).srm".
[INFO] Redirecting savestate to "/home/pi/RetroPie/roms/psx/MediEvil (USA).state".
[INFO] Environ UNSUPPORTED (#59).
[INFO] Environ GET_VARIABLE pcsx_rearmed_memcard2:
[INFO] disabled
[libretro INFO] Memcard 2: disabled
[libretro INFO] Starting PCSX-ReARMed
[libretro INFO] Running PCSX Version 1.9 (Sep 10 2021).
[libretro INFO] psxMap: warning: wanted to map @80000000, got 0x6f5a5000
[libretro INFO] Init new dynarec
[libretro INFO] testing if we can run recompiled code..
[libretro INFO] test passed.
[libretro INFO] warning: RAM is not directly mapped, performance will suffer
[libretro INFO] Mapped (RAM/scrp/ROM/LUTs/TC):
[libretro INFO] 77000000/1f800000/1fc00000/08000000/70318000
[INFO] Environ GET_VARIABLE pcsx_rearmed_bios:
[INFO] auto
[INFO] Environ SYSTEM_DIRECTORY: "/home/pi/RetroPie/BIOS".
[libretro INFO] found BIOS file: scph5501.bin
[INFO] Environ GET_CAN_DUPE: true
[INFO] Environ UNSUPPORTED (#57).
[INFO] Environ SET_DISK_CONTROL_INTERFACE.
[INFO] Environ GET_RUMBLE_INTERFACE.
[INFO] Environ UNSUPPORTED (#65587).
[INFO] Environ PERFORMANCE_LEVEL: 6.
[INFO] Content loading skipped. Implementation will load it on its own.
[INFO] Environ SET_INPUT_DESCRIPTORS:
[INFO] RetroPad, User 1, Button "B (bottom)" => "Cross"
[INFO] RetroPad, User 1, Button "Y (left)" => "Square"
[INFO] RetroPad, User 1, Button "Select" => "Select"
[INFO] RetroPad, User 1, Button "Start" => "Start"
[INFO] RetroPad, User 1, Button "D-Pad Up" => "D-Pad Up"
[INFO] RetroPad, User 1, Button "D-Pad Down" => "D-Pad Down"
[INFO] RetroPad, User 1, Button "D-Pad Left" => "D-Pad Left"
[INFO] RetroPad, User 1, Button "D-Pad Right" => "D-Pad Right"
[INFO] RetroPad, User 1, Button "A (right)" => "Circle"
[INFO] RetroPad, User 1, Button "X (up)" => "Triangle"
[INFO] RetroPad, User 1, Button "L" => "L1"
[INFO] RetroPad, User 1, Button "R" => "R1"
[INFO] RetroPad, User 1, Button "L2" => "L2"
[INFO] RetroPad, User 1, Button "R2" => "R2"
[INFO] RetroPad, User 1, Button "L3" => "L3"
[INFO] RetroPad, User 1, Button "R3" => "R3"
[INFO] RetroPad, User 2, Button "B (bottom)" => "Cross"
[INFO] RetroPad, User 2, Button "Y (left)" => "Square"
[INFO] RetroPad, User 2, Button "Select" => "Select"
[INFO] RetroPad, User 2, Button "Start" => "Start"
[INFO] RetroPad, User 2, Button "D-Pad Up" => "D-Pad Up"
[INFO] RetroPad, User 2, Button "D-Pad Down" => "D-Pad Down"
[INFO] RetroPad, User 2, Button "D-Pad Left" => "D-Pad Left"
[INFO] RetroPad, User 2, Button "D-Pad Right" => "D-Pad Right"
[INFO] RetroPad, User 2, Button "A (right)" => "Circle"
[INFO] RetroPad, User 2, Button "X (up)" => "Triangle"
[INFO] RetroPad, User 2, Button "L" => "L1"
[INFO] RetroPad, User 2, Button "R" => "R1"
[INFO] RetroPad, User 2, Button "L2" => "L2"
[INFO] RetroPad, User 2, Button "R2" => "R2"
[INFO] RetroPad, User 2, Button "L3" => "L3"
[INFO] RetroPad, User 2, Button "R3" => "R3"
[INFO] RetroPad, User 3, Button "B (bottom)" => "Cross"
[INFO] RetroPad, User 3, Button "Y (left)" => "Square"
[INFO] RetroPad, User 3, Button "Select" => "Select"
[INFO] RetroPad, User 3, Button "Start" => "Start"
[INFO] RetroPad, User 3, Button "D-Pad Up" => "D-Pad Up"
[INFO] RetroPad, User 3, Button "D-Pad Down" => "D-Pad Down"
[INFO] RetroPad, User 3, Button "D-Pad Left" => "D-Pad Left"
[INFO] RetroPad, User 3, Button "D-Pad Right" => "D-Pad Right"
[INFO] RetroPad, User 3, Button "A (right)" => "Circle"
[INFO] RetroPad, User 3, Button "X (up)" => "Triangle"
[INFO] RetroPad, User 3, Button "L" => "L1"
[INFO] RetroPad, User 3, Button "R" => "R1"
[INFO] RetroPad, User 3, Button "L2" => "L2"
[INFO] RetroPad, User 3, Button "R2" => "R2"
[INFO] RetroPad, User 3, Button "L3" => "L3"
[INFO] RetroPad, User 3, Button "R3" => "R3"
[INFO] RetroPad, User 4, Button "B (bottom)" => "Cross"
[INFO] RetroPad, User 4, Button "Y (left)" => "Square"
[INFO] RetroPad, User 4, Button "Select" => "Select"
[INFO] RetroPad, User 4, Button "Start" => "Start"
[INFO] RetroPad, User 4, Button "D-Pad Up" => "D-Pad Up"
[INFO] RetroPad, User 4, Button "D-Pad Down" => "D-Pad Down"
[INFO] RetroPad, User 4, Button "D-Pad Left" => "D-Pad Left"
[INFO] RetroPad, User 4, Button "D-Pad Right" => "D-Pad Right"
[INFO] RetroPad, User 4, Button "A (right)" => "Circle"
[INFO] RetroPad, User 4, Button "X (up)" => "Triangle"
[INFO] RetroPad, User 4, Button "L" => "L1"
[INFO] RetroPad, User 4, Button "R" => "R1"
[INFO] RetroPad, User 4, Button "L2" => "L2"
[INFO] RetroPad, User 4, Button "R2" => "R2"
[INFO] RetroPad, User 4, Button "L3" => "L3"
[INFO] RetroPad, User 4, Button "R3" => "R3"
[INFO] RetroPad, User 5, Button "B (bottom)" => "Cross"
[INFO] RetroPad, User 5, Button "Y (left)" => "Square"
[INFO] RetroPad, User 5, Button "Select" => "Select"
[INFO] RetroPad, User 5, Button "Start" => "Start"
[INFO] RetroPad, User 5, Button "D-Pad Up" => "D-Pad Up"
[INFO] RetroPad, User 5, Button "D-Pad Down" => "D-Pad Down"
[INFO] RetroPad, User 5, Button "D-Pad Left" => "D-Pad Left"
[INFO] RetroPad, User 5, Button "D-Pad Right" => "D-Pad Right"
[INFO] RetroPad, User 5, Button "A (right)" => "Circle"
[INFO] RetroPad, User 5, Button "X (up)" => "Triangle"
[INFO] RetroPad, User 5, Button "L" => "L1"
[INFO] RetroPad, User 5, Button "R" => "R1"
[INFO] RetroPad, User 5, Button "L2" => "L2"
[INFO] RetroPad, User 5, Button "R2" => "R2"
[INFO] RetroPad, User 5, Button "L3" => "L3"
[INFO] RetroPad, User 5, Button "R3" => "R3"
[INFO] Environ SET_PIXEL_FORMAT: RGB565.
[libretro INFO] RGB565 supported, using it
[INFO] Environ GET_VARIABLE pcsx_rearmed_frameskip:
[INFO] 0
[INFO] Environ GET_VARIABLE pcsx_rearmed_region:
[INFO] auto
[INFO] Environ GET_VARIABLE pcsx_rearmed_multitap:
[INFO] disabled
[INFO] Environ GET_VARIABLE pcsx_rearmed_negcon_deadzone:
[INFO] 0
[INFO] Environ GET_VARIABLE pcsx_rearmed_negcon_response:
[INFO] linear
[INFO] Environ GET_VARIABLE pcsx_rearmed_analog_axis_modifier:
[INFO] circle
[INFO] Environ GET_VARIABLE pcsx_rearmed_vibration:
[INFO] enabled
[INFO] Environ GET_VARIABLE pcsx_rearmed_dithering:
[INFO] enabled
[INFO] Environ GET_VARIABLE pcsx_rearmed_neon_interlace_enable:
[INFO] disabled
[INFO] Environ GET_VARIABLE pcsx_rearmed_neon_enhancement_enable:
[INFO] enabled
[INFO] Environ GET_VARIABLE pcsx_rearmed_neon_enhancement_no_main:
[INFO] enabled
[INFO] Environ GET_VARIABLE pcsx_rearmed_duping_enable:
[INFO] enabled
[INFO] Environ GET_VARIABLE pcsx_rearmed_display_internal_fps:
[INFO] disabled
[INFO] Environ GET_VARIABLE pcsx_rearmed_drc:
[INFO] enabled
[INFO] Environ GET_VARIABLE pcsx_rearmed_spu_reverb:
[INFO] enabled
[INFO] Environ GET_VARIABLE pcsx_rearmed_spu_interpolation:
[INFO] simple
[INFO] Environ GET_VARIABLE pcsx_rearmed_pe2_fix:
[INFO] disabled
[INFO] Environ GET_VARIABLE pcsx_rearmed_inuyasha_fix:
[INFO] disabled
[INFO] Environ GET_VARIABLE pcsx_rearmed_async_cd:
[INFO] sync
[INFO] Environ GET_VARIABLE pcsx_rearmed_noxadecoding:
[INFO] enabled
[INFO] Environ GET_VARIABLE pcsx_rearmed_nocdaudio:
[INFO] enabled
[INFO] Environ GET_VARIABLE pcsx_rearmed_spuirq:
[INFO] disabled
[INFO] Environ GET_VARIABLE pcsx_rearmed_gunconadjustx:
[INFO] 0
[INFO] Environ GET_VARIABLE pcsx_rearmed_gunconadjusty:
[INFO] 0
[INFO] Environ GET_VARIABLE pcsx_rearmed_gunconadjustratiox:
[INFO] 1
[INFO] Environ GET_VARIABLE pcsx_rearmed_gunconadjustratioy:
[INFO] 1
[INFO] Environ GET_VARIABLE pcsx_rearmed_nosmccheck:
[INFO] disabled
[INFO] Environ GET_VARIABLE pcsx_rearmed_gteregsunneeded:
[INFO] disabled
[INFO] Environ GET_VARIABLE pcsx_rearmed_nogteflags:
[INFO] disabled
[INFO] Environ GET_VARIABLE pcsx_rearmed_psxclock:
[INFO] 57
[INFO] Environ GET_VARIABLE pcsx_rearmed_input_sensitivity:
[INFO] 1.00
[INFO] Environ GET_VARIABLE pcsx_rearmed_show_other_input_settings:
[INFO] disabled
[INFO] Environ UNSUPPORTED (#55).
[INFO] Environ UNSUPPORTED (#55).
[INFO] Environ UNSUPPORTED (#55).
[INFO] Environ UNSUPPORTED (#55).
[INFO] Environ UNSUPPORTED (#55).
[INFO] Environ UNSUPPORTED (#55).
[INFO] Environ UNSUPPORTED (#55).
[INFO] Environ GET_VARIABLE pcsx_rearmed_show_bios_bootlogo:
[INFO] disabled
[libretro INFO] plugin: plugins/builtin_gpu
[libretro INFO] plugin: plugins/builtin_spu
[libretro INFO] plugin: plugins/builtin_pad
[libretro INFO] plugin: plugins/builtin_pad
[libretro INFO] Plugins loaded.
[libretro INFO] Loaded CD Image: /home/pi/RetroPie/roms/psx/MediEvil (USA).PBP[+pbp].
[libretro INFO] Track 01 (DATA) - Start 00:02:00, Length 00:02:00
[libretro INFO] Track 02 (AUDIO) - Start 00:04:00, Length 49:57:36
[libretro INFO] CD-ROM Label: MEDIEVIL
[libretro INFO] CD-ROM ID: SCUS94227
[libretro INFO] CD-ROM EXE Name: SCUS_942.27;1
[INFO] Skipping SRAM load..
[INFO] Version of libretro API: 1
[INFO] Compiled against API: 1
[INFO] [Audio]: Set audio input rate to: 44100.00 Hz.
[INFO] [Video]: Video @ 960x720
[INFO] [Video]: Starting threaded video driver ...
[INFO] [EGL] Falling back to eglGetDisplay
[INFO] [EGL]: EGL version: 1.4
[INFO] [EGL]: Current context: 0x1.
[INFO] [GL]: Found GL context: videocore
[INFO] [GL]: Detecting screen resolution 1920x1080.
[INFO] [EGL]: eglSwapInterval(1)
[INFO] [GL]: Vendor: Broadcom, Renderer: VideoCore IV HW.
[INFO] [GL]: Version: OpenGL ES 2.0.
[INFO] Querying EGL extension: KHR_image => exists
[WARN] [GL]: GLES implementation does not have BGRA8888 extension.
32-bit path will require conversion.
[INFO] [GL]: Using resolution 1920x1080
[INFO] [GL]: Default shader backend found: glsl.
[INFO] [Shader driver]: Using GLSL shader backend.
[WARN] [GL]: Stock GLSL shaders will be used.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Linking GLSL program.
[INFO] Resetting shader to defaults ...
[INFO] [GL]: Using 4 textures.
[INFO] [GL]: Loaded 1 program(s).
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Video]: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver.
[INFO] [udev]: Keyboard #0 (/dev/input/event0).
[INFO] [udev]: Plugged pad: ShanWan PC/PS3/Android (9571:1397) on port #0.
[INFO] [udev]: Pad #0 (/dev/input/event2) supports 0 force feedback effects.
[INFO] [Autoconf]: 365 profiles found.
[INFO] [udev]: Plugged pad: ShanWan PC/PS3/Android (9571:1397) on port #1.
[INFO] [udev]: Pad #1 (/dev/input/event3) supports 0 force feedback effects.
[INFO] [autoconf]: selected configuration: /home/pi/.config/retroarch/autoconfig/udev/ShanWan PC_PS3_Android.cfg
[INFO] [Autoconf]: 365 profiles found.
[INFO] [Joypad]: Found joypad driver: "udev".
[WARN] [udev]: Full-screen pointer won't be available.
[INFO] [Video]: Found display server: null
[INFO] Found shader "/home/pi/.config/retroarch/shaders/2xsal-level2-crt.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/2xsal.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/2xScaleHQ.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/barrel-distortion.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/barrel-distortion_lanczos4.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/barrel-distortion_phosphor.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/barrel-distortion_snes.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/Brighter-with_Contrast.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/bsnes_gamma_ramp.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/crt-pi-curvature-vertical.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/crt-pi-curvature.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/crt-pi-vertical.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/crt-pi.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/gameboy-screen-grid.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/gameboy.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/gameboy2.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/gba-color.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/hq2x&lcd3x.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/hq2x.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/hq2x2.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/hq2x_lcd3x.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/hq2x_phosphor.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/hq2xwaterpaint.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/hq2xwaterpaintscanline.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/hq4x.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/hq4x_lcd3x.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/nds-color.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/nds.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/nedi.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/palm-color.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/phosphor.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/psp-color.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/sharp-bilinear-2x-prescale.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/sharp-bilinear-scanlines.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/sharp-bilinear-simple.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/snes.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/snes2.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/snes_hq2x.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/snes_hq2xwaterpaint.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/snes_hq2xwaterpainthicontrast.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/snes_hq2xwaterpaintscanline.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/snes_lcd3x.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/snes_phosphor.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/snes_scanline.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/snes_waterpaint.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/stock.glsl"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/super-2xsai.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/super-eagle.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/vba-color.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/xbr-lv1-noblend.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/zfast_crt_curve.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/zfast_crt_curve_vertical.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/zfast_crt_standard.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/zfast_crt_standard_vertical.glslp"
[INFO] Found shader "/home/pi/.config/retroarch/shaders/zfast_lcd_standard.glslp"
[INFO] ALSA: Using signed 16-bit format.
[INFO] ALSA: Period size: 384 frames
[INFO] ALSA: Buffer size: 1536 frames
[INFO] [LED]: LED driver = 'null' 0x2b9f70
[INFO] [MIDI]: Initializing ...
[INFO] [MIDI]: Input disabled.
[INFO] [MIDI]: Output disabled.
[INFO] [MIDI]: Initialized "null" driver.
[libretro INFO] port: 1 device: standard
[libretro INFO] port: 2 device: standard
[libretro INFO] port: 3 device: standard
[libretro INFO] port: 4 device: standard
[libretro INFO] port: 5 device: standard
[libretro INFO] port: 6 device: standard
[libretro INFO] port: 7 device: standard
[libretro INFO] port: 8 device: standard
[INFO] Loading history file: [/opt/retropie/configs/psx/content_history.lpl].
[INFO] Loading history file: [/opt/retropie/configs/psx/content_favorites.lpl].
[INFO] Loading history file: [/opt/retropie/configs/psx/content_music_history.lpl].
[INFO] Loading history file: [/opt/retropie/configs/psx/content_video_history.lpl].
[INFO] Loading history file: [/opt/retropie/configs/psx/content_image_history.lpl].
[INFO] Environ SET_GEOMETRY.
[INFO] SET_GEOMETRY: 640x478, aspect: 1.333.
[INFO] [autoconf]: selected configuration: /home/pi/.config/retroarch/autoconfig/udev/ShanWan PC_PS3_Android.cfg
[INFO] Environ SET_GEOMETRY.
[INFO] SET_GEOMETRY: 512x480, aspect: 1.333.
[INFO] Environ SET_GEOMETRY.
[INFO] SET_GEOMETRY: 320x240, aspect: 1.333.
[INFO] Environ SET_GEOMETRY.
[INFO] SET_GEOMETRY: 640x480, aspect: 1.333.
[INFO] Environ SET_GEOMETRY.
[INFO] SET_GEOMETRY: 1024x480, aspect: 1.333.
[INFO] Environ SET_GEOMETRY.
[INFO] SET_GEOMETRY: 320x240, aspect: 1.333.
[INFO] Environ SET_GEOMETRY.
[INFO] SET_GEOMETRY: 1024x480, aspect: 1.333.
[INFO] Environ SET_GEOMETRY.
[INFO] SET_GEOMETRY: 320x240, aspect: 1.333.
[INFO] Environ SET_GEOMETRY.
[INFO] SET_GEOMETRY: 1024x480, aspect: 1.333.
[INFO] Saving RAM type #0 to "/home/pi/RetroPie/roms/psx/MediEvil (USA).srm".
[INFO] Saved successfully to "/home/pi/RetroPie/roms/psx/MediEvil (USA).srm".
[INFO] Unloading game..
[INFO] Unloading core..
[INFO] Unloading core symbols..
[INFO] Saved core options file to "/opt/retropie/configs/all/retroarch-core-options.cfg"
[INFO] Threaded video stats: Frames pushed: 6258, Frames dropped: 10.
ari64_reset
\ \ \ -
@mtlhd1011 To see the log, run
less /dev/shm/runcommand.log
Use space to scroll, or
Q
to quit viewing the log. -
@mitu Hello! Did I do it wrong?
-
@mtlhd1011 Looking at the log file, it doesn't seem the you're using the latest version of the packages included in RetroPie - your version of RetroArch is from almost 3 years ago
Built: Oct 9 2018 [INFO] Version: 1.7.5 [INFO] Git: c9c6c5a
Also, from the logs it looks like RetroArch is not using the RetroPie default joypad configuration files - which are created when you configure your controller in EmulationStation. Did you reset the RetroArch configuration for the PS1 system ?
How did you install RetroPie ?
-
@mitu Thanks for reviewing it! That's weird, I just updated RetroPie and all the packages less than a week ago through the RetroPie setup menu. The updates took a very long time. When I checked the PSX emulator package for updates it said it's up to date too. I did not build this system, it was a pre-built one I received as a gift. I haven't used it in a while and saw that there have been quite a few updates so that's why I updated everything. Now I'm wishing I hadn't because I unknowingly broke a few things. I have reset all RetroArch configs to default, and saved it, tried manually entering them and saving it, changed the control type from retropad to retropad with analog and saved it, yet no combination I make changes the way the controls act in the PSX emulator. Even while I'm in a game in PSX emulator, if I hit F1 on the keyboard to open the RetroArch overlay, I can go into the controls and look at the mapping, it all looks like it should, so I'm confused as to why it's not working right.
-
@mtlhd1011 said in Psx emulator controls not working:
@mitu Thanks for reviewing it! That's weird, I just updated RetroPie and all the packages less than a week ago through the RetroPie setup menu. The updates took a very long time. When I checked the PSX emulator package for updates it said it's up to date too. I did not build this system, it was a pre-built one I received as a gift. I haven't used it in a while and saw that there have been quite a few updates so that's why I updated everything. Now I'm wishing I hadn't because I unknowingly broke a few things.
firstly, we don't support third party builds, we only support the official retropie image, or a manual install of the script. please read: https://retropie.org.uk/forum/topic/3/read-this-first
secondly, even if you were using official retropie, you would be on an unsupported version of the underlying OS (stretch), i believe. i am not sure if this has an effect on updating - i think there's no binaries for it?
in any case, it sounds like to fix your issue and/or get support, you need to start again with the official image: https://retropie.org.uk/docs/First-Installation/
-
@dankcushions the software all appears to be the official RetroPie software, if there's a way to verify that I can check. As for the underlying OS yes it is Raspbian stretch I believe. Since I updated everything, when I go into RetroPie setup it pops up a message about stretch not being supported with the most current version of RetroPie (like you have stated) and basically saying things will function as best as they can. I don't know what to do about that. I really don't want to have to wipe everything that's on there though, I have progress on several games that I can play that I don't wish to lose. I don't know if there is a way to just update or replace the underlying OS without losing everything, but if there is, I'd like to try that. Any suggestions?
-
@mtlhd1011 You can back-up your ROMs, saves, BIOS files and restore them on a new system after installation - https://retropie.org.uk/docs/Updating-RetroPie/#backup-option-2
-
@mtlhd1011 said in Psx emulator controls not working:
@dankcushions the software all appears to be the official RetroPie software, if there's a way to verify that I can check.
it wouldn’t matter - even official retropie that someone else installed is not supported, because neither you nor we know the configuration. although it doesn’t matter in this case as you are running such an old version and can’t update anyway.
I don't know if there is a way to just update or replace the underlying OS without losing everything, but if there is, I'd like to try that. Any suggestions?
i agree with mitu above. there is no supported way of updating the OS in place.
-
@mitu Thank you for the instructions, I am currently copying all those files now. Looks like it might take a while. I will start with a clean install once that completes. Stay tuned! Haha
-
Ok I have now installed the latest image myself and transferred over my roms. It looks like I'll need to add some emulators as some of my systems are missing. The good news is the PlayStation controls work now and so do the hotkeys! There seems to be some issue though, when I start a PSX game now at the very beginning it says no bios detected and the games look worse than before, like very pixelated and rough. I did back up my bios folder from my prior build but didn't transfer those files yet as I feared I might transfer the problem also. What should I do about that?
-
@mtlhd1011 said in Psx emulator controls not working:
There seems to be some issue though, when I start a PSX game now at the very beginning it says no bios detected and the games look worse than before, like very pixelated and rough.
have you see our documentation?
BIOS info on same page.
-
@dankcushions No I haven't seen that until now. If it's required, I'm surprised it's not in the initial setup page, that's what I followed. So I see it tells me which ones are supported for what emulator but it doesn't say where to get them, how to install them or select one. Is there another page about that?
-
@mtlhd1011 said in Psx emulator controls not working:
@dankcushions No I haven't seen that until now. If it's required, I'm surprised it's not in the initial setup page, that's what I followed.
if everything was included in the first installation page it would be a very long page. if you want specific information about a specific system, there's dedicated pages for that. i think that's a sensible compromise.
So I see it tells me which ones are supported for what emulator but it doesn't say where to get them
linking or instructing how to get copyright files would not be a good idea for this project. please see rule 1
, how to install them
it says where to play them in https://retropie.org.uk/docs/Playstation-1/#bios - you transfer in the same way as game files - https://retropie.org.uk/docs/Transferring-Roms/
or select one.
the emulator will select the right one automatically. if you do not have an appropriate one in the appropriate place, you'll see the error you saw previously.
-
@dankcushions I can understand that. Maybe a link to the bios section after mentioning it briefly in the first installation section would be helpful I think, kind of like it does with the roms. I didn't realize the bios were proprietary as well, so mentioning that somewhere would help first timers like me understand that better too I think. Thanks for the info, I saw the location section but thought maybe it was something that has to be installed as a program (thinking computer bios) vs. a file drop. I'll see if I can find it and get it going.
I also have an additional question related to my new install. I have one of those nespi+ cases with the fan on it. I was reading their scripts don't work right anymore with the new version of RetroPie. Is that true? I saw someone made a work around with some generic code, but I don't understand it fully.
-
@mtlhd1011 said in Psx emulator controls not working:
@dankcushions I can understand that. Maybe a link to the bios section after mentioning it briefly in the first installation section would be helpful I think, kind of like it does with the roms. I didn't realize the bios were proprietary as well, so mentioning that somewhere would help first timers like me understand that better too I think. Thanks for the info, I saw the location section but thought maybe it was something that has to be installed as a program (thinking computer bios) vs. a file drop. I'll see if I can find it and get it going.
I also have an additional question related to my new install. I have one of those nespi+ cases with the fan on it. I was reading their scripts don't work right anymore with the new version of RetroPie. Is that true? I saw someone made a work around with some generic code, but I don't understand it fully.
Update on this, I copied over the bios for each of the emulators that were on my machine previously. Once I did that it broke my PSX emulator again. What I found was that there were a few bios on there that were not supported by the version of the rearmed emulator it currently uses. So I think it picked a bad bios which broke functionality. Once I pulled those unsupported bios from the folder, it functions normally once again. This must've been what happened when I updated my system previously. I also see commodore 64 is broken currently too, probably the same thing there I'll need to dig into. I did manage to get the nespi-case script installed also, I will monitor it to see if that portion has issues.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.