Pi5 and lr-citra can't install how do i fix or install?

retro777

@AwesomeKingClem
thanks for reply!!
u mean RetroPie-Extra have problem on Rpi5?
I try
https://github.com/Exarkuniv/Ares-Nano-Extras
but error

here:

~/Ares-Nano-Extras $ ./install-extras.sh /home/aresuser/ARES-Setup
RetroPie-Setup directory /home/aresuser/ARES-Setup doesn't exist. Please input the location of RetroPie-Setup.

maybe happy when fix about this problems for many people, i believe.

ExarKunIv

@retro777 that repo is for the Jetson nano. And in the current state it will not work since it's not set up for Retropie. So the file names are all wrong.

And that board is running a different OS. So that why there is a error.

retro777

@ExarKunIv Thanks！
lr-citra not update yet...

ExarKunIv

@retro777 what repo are you trying, are you using the one for the Nano or Retropie

they are close, but the file layout is different.
the one i have for retropie does have lr-citra, but its marked for x86. if you want to try that then you have to replace "!all 64bit" from the rp_module_flags= with just " "

I dont have a pi5 so thats all i can help with. i dont know what drivers may or may not be needed. and i did not bother with the pi4 since it was not powerful enough.

maybe one they get a bookworm release i might revisit it for shits and giggles

AwesomeKingClem

@ExarKunIv I appreciate the response. I was using the RetroPie repo and not the Nano repo. When I get the chance, I will try to respond with my results.

AwesomeKingClem

Welp…
Error
And if that link isn't working, don't blame me. I can't find out why.
pastebin.com/vB9W9nFF
@ExarKunIv

retro777

@AwesomeKingClem said in Pi5 and lr-citra can't install how do i fix or install?:

Welp…
Error
And if that link isn't working, don't blame me. I can't find out why.
pastebin.com/vB9W9nFF
@ExarKunIv
i also.. umm

ExarKunIv

@AwesomeKingClem I checked your pastebin. It is odd that it just ends but doesn't give any errors to why.

Not impossible to figure out more. It will just take digging. At this moment I don't have a pi5 (I'm working on getting one soonish I hope)
Till then I'm not going to be much help

Trying it on a pi4 with bookworm might help. Or not. Since they are different chips. It could just lead to more errors and not help your issue.

Not saying I'm not going to not try that. Just might not get the results we want. That's all

AwesomeKingClem

@ExarKunIv Appreciate it, I will try to find whatever logs are available and get back to you with any important information.

ExarKunIv

@AwesomeKingClem there was a additional command line that can be inserted into the script that could provide that info.

I just need to remember it now. Lol
Once I remember/find it again. I can tell you where to put it in the script and go from there

AwesomeKingClem

ExarKunIv

@AwesomeKingClem ok.

I'm hoping this works
I don't have my pi in front of me so I'm kinda guessing here from memory

You'll have to edit the script

You need to replace make with make > output.txt 2> errors.txt

When you run the script again and it fails it should make a txt file called errors and in that should be more detailed error log.

The txt file will be in Retropie setup/tmp/build/lr-citra (or something like that.)

I hope.

Come Monday once I have my pi in front again. I'll work on getting a 64bit load going to see if that will be helpful also.

roslof

@ExarKunIv said in Pi5 and lr-citra can't install how do i fix or install?:

@AwesomeKingClem I checked your pastebin. It is odd that it just ends but doesn't give any errors to why.

This is in the pastebin. Appears whether or not line is changed torp_module_flags=""

/tmp/ccQcC5B8.s: Assembler messages:
/tmp/ccQcC5B8.s:93: Error: selected processor does not support `pmull v0.1q,v0.1d,v1.1d'
/tmp/ccQcC5B8.s:103: Error: selected processor does not support `pmull2 v1.1q,v1.2d,v2.2d'
/tmp/ccQcC5B8.s:171: Error: selected processor does not support `pmull v5.1q,v0.1d,v5.1d'
/tmp/ccQcC5B8.s:187: Error: selected processor does not support `pmull v3.1q,v3.1d,v6.1d'
/tmp/ccQcC5B8.s:217: Error: selected processor does not support `pmull v0.1q,v2.1d,v3.1d'
/tmp/ccQcC5B8.s:224: Error: selected processor does not support `pmull v4.1q,v4.1d,v3.1d'
/tmp/ccQcC5B8.s:231: Error: selected processor does not support `pmull v1.1q,v2.1d,v1.1d'
/tmp/ccQcC5B8.s:235: Error: selected processor does not support `pmull2 v2.1q,v2.2d,v3.2d'
/tmp/ccQcC5B8.s:409: Error: selected processor does not support `pmull v4.1q,v3.1d,v4.1d'
/tmp/ccQcC5B8.s:417: Error: selected processor does not support `pmull v5.1q,v1.1d,v5.1d'
/tmp/ccQcC5B8.s:425: Error: selected processor does not support `pmull v3.1q,v3.1d,v6.1d'
/tmp/ccQcC5B8.s:443: Error: selected processor does not support `pmull v17.1q,v17.1d,v4.1d'
/tmp/ccQcC5B8.s:451: Error: selected processor does not support `pmull v17.1q,v17.1d,v5.1d'
/tmp/ccQcC5B8.s:460: Error: selected processor does not support `pmull v1.1q,v1.1d,v6.1d'
/tmp/ccQcC5B8.s:477: Error: selected processor does not support `pmull v4.1q,v1.1d,v4.1d'
/tmp/ccQcC5B8.s:484: Error: selected processor does not support `pmull2 v5.1q,v1.2d,v5.2d'
/tmp/ccQcC5B8.s:494: Error: selected processor does not support `pmull v1.1q,v1.1d,v6.1d'
/tmp/ccQcC5B8.s:546: Error: selected processor does not support `pmull v4.1q,v1.1d,v4.1d'
/tmp/ccQcC5B8.s:554: Error: selected processor does not support `pmull v5.1q,v3.1d,v5.1d'
/tmp/ccQcC5B8.s:563: Error: selected processor does not support `pmull v1.1q,v1.1d,v6.1d'
make[2]: *** [externals/cryptopp/CMakeFiles/cryptopp.dir/build.make:328: externals/cryptopp/CMakeFiles/cryptopp.dir/cryptopp/gcm_simd.cpp.o] Error 1

ExarKunIv

@roslof Thanks

Not 100 what's going on. But it's something to go off of.

What's your system you are trying this on?

AwesomeKingClem

@ExarKunIv
Pi Model: Pi 5
Power Supply: Official Pi 5 Power Supply
RetroPie Version: 4.8.6
Built From: retropie_setup.sh script on Raspbian official full x64 img
Devices: N64 Controller (2)

This is always going to be in my signature.

abj

Do you have add the kernel line in the config.txt file?

kernel=kernel8.img

AwesomeKingClem

@abj I don't know, let me check when I get the chance.

retro777

@abj i added this text
but same error...
lr-ctira can't update yet...?

abj

@retro777
Sorry, i don't know how i can help with this, a lot of things aren't ready yet.
By the way, after you added the kernel line, most of N64 emulators will would work now.

ExarKunIv

i managed to get a pi5. it will take a bit to get through all that needs to get done to get it working.
but i will be able to take a look at this.