Power off Wipes The SD?

allenpie

I have 4 different SD's right now all doing the same thing I have 2 different units as well
2 From Amazon

2 are 16gb Micros SD HD with a rasbery Logo on it
1 is a SanDisk 16gb Micro SD
1 is a KingSton 8GB Micro SD

Both my Pi2 and Pi3 with 4.02 won't come back after a system within the system

PokeEngineer

Try redownloading the image...

allenpie

^^ alright I'll give that a shot thanks. I do have my image on a network software sharing using WIn32 to grab It; I'm working on this now will keep u guys updated.

PokeEngineer

@allenpie

Also try downloading and flashing the image directly from your computer.

allenpie

^^ yes; I'm going to try a few things right now that was my 1st though direct from my drive to the win32 tool and not going over my Nas network share
Just 1 less issue to worry about

allenpie

Alright Test 1 WAS great
Just a fresh OS install, setup controller shutdown took sd out back in, took cable uplug and plug back in. Started up no issue
Going to Update and setup Samba now will keep u posted

Might of been a bad rom copy from my software NAS share.

PokeEngineer

@allenpie

Alright, great! :)

allenpie

Bad News with My pi3 Same image that shutdown with the Pi2, different SD. After I do a basic install and install Samba shutdown and take the plug out and plug it back in. It won't power up this is a 16gb Micros SD HD with a rasbery Logo

Going to try my Sandisk on the pi2 after an update to see if it's the same issue.

allenpie

CanaKit 2.5A USB Power Supply is being used btw

OK more bad news same issue as soon as I updated with a basic install reboot and do a system shutdown it won't come backup
Tested on 2 different PC's doing the Image Via Win32 and tested with both a pi2 and pi3 with different SD cards

Once it shutdowns it won't come back up and needs to be reimaged. What am I doing wrong? Should I just set it up and take off the save lock and not allow it to save? I'm open to ideas?

allenpie

Ok after so much testing found out to be a user error

I was just unplugging it from the base of the unit, where unit connects to the power but when I unplug it from the plug by the power plug not the adapter it works just fine :) All is well

nothing got corrupted