8bitdo SFC30 - Glitch at Retropie Main Menu?

digitalnomatik

@RetroFreak89 Did you ever get this sorted-out? I can't find anything out there and have tried everything I can think of...

Rion

@digitalnomatik @RetroFreak89

Reset the controller configuration by exiting EmulationStation pressing F4. Type

sudo /home/pi/RetroPie-Setup/retropie_setup.sh

Reset EmulationStation controll configuration.

Unpair your 8bitdo controller in the BT setup.
Connect your 8bitdo gamepad to your PC (fully charged) and upgrade to the latest Fw from 8bitdo's website.
Redo the controller configuration in BT Setup.
Make sure the hack option is turned "off" and that you power on the controller with start only!. On the pro only start up with power on.

After you are done redo the controller configuration in EmulationStation (restart first)

sudo reboot

digitalnomatik

@Rion Thanks for responding! I will try these steps when I get home today and report back. Is it worth noting that I've already upgraded the firmware (most recent) on the controller? And when I connect - I hold R + select to pair. Might that be what is causing it? I ask because I see you mentioned starting / pairing using start only. Thanks again!

denisuu

I'm having the same issue and the controller is only working in emulation station not in roms.

steveieboy

I have the same issue and set up. Have logitech and Xami controllers that work fine.

denisuu

I'm completely uninstalling/reinstalling retro pie to see if the problem persists.

steveieboy

@denisuu doing the same from a clean install.

hiulit

Same here! I'm using an NES30 controller and I've already followed @Rion 's steps.

steveieboy

Good news! This is what I did to get it to work:

Backed up my ROMs and BIOS to a local drive
Re-installed disk image from retropie to my SDCard
Updated scripts/installed latest packages
Rebooted
Followed this guide, I just turned the controller on, didn't need to put it into pairing mode: https://retropie.org.uk/docs/8Bitdo-Controller/

denisuu

I also reinstalled retropie from from the latest image on the website. Still the same problem :(

I'm on firmware 2.70 how about you?

steveieboy

@denisuu Yes on 2.70 controller firmware. On a Pi 3.

BuZz

@denisuu Please do not post a support request without first reading and following the advice in https://retropie.org.uk/forum/topic/3/read-this-first (Best to start a new topic in the future and provide full info about set-up)

This topic is about another issue.

You probably have the wrong 8bitdo hack mode - you need to reconfigure after switching it off - did you follow the guide here ? https://retropie.org.uk/docs/8Bitdo-Controller/ ?

flandigt

Hi there,

I do not know if it's the correct topic but I had to install some of

these files

into the directory

/opt/retropie/configs/all/retroarch/autoconfig/

to get the controllers working while playing roms.

My configuration also is

2* 8bitdo SFC30 controllers
raspberry pi 3
retropie 4.1

denisuu

@BuZz I did follow that guide it's been posted already the post above mine.

I did a clean install
turned off the "8bitdo mapping hack = off "
paired the SFC30
udev rule
rebooted
setup the controller in ES

Still when I turn it on it starts scrolling left until I press right.

BuZz

@denisuu does the controller work in games ? That was the issue I was replying about - the issue with it navigating left until a button is pressed is a known kernel issue and affects a lot of controllers - nothing can be done about it in retropie by us automatically - but it's possible to manually fix it, but it requires a kernel recompile.

denisuu

@BuZz Yes it is now, but I will open another topic about that isue.

Is there any fool proof tutorial on how to recompile the kernel? Or is that advanced stuff?

Rion

@denisuu I wouldn't mind that you posted a new thread on how to compile the kernel with this fix.

hiulit

@BuZz It's good to know that it's a kernel bug. Thanks for the info.