RetroPie forum home
    • Recent
    • Tags
    • Popular
    • Home
    • Docs
    • Register
    • Login
    Please do not post a support request without first reading and following the advice in https://retropie.org.uk/forum/topic/3/read-this-first

    [SOLVED] N64 Analog Joystick Issue with Teensy LC

    Scheduled Pinned Locked Moved Help and Support
    retropien64n64 controllerjoystickanalog stick
    17 Posts 3 Posters 1.1k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • G
      grant2258 Banned
      last edited by grant2258

      Well The retropie menu doesnt use analog. It usues digital to it probably wanting at least a 50% pull before it registers. When real analog is polled it wish up as jumpy.

      I just finished work I havent compiled this fix any errors if there is any. its trivial to add the other axis only done the x and y to get you on the right path. Hope it helps you out

      /* Buttons to USB Joystick Example

   You must select Joystick from the "Tools > USB Type" menu

   This example code is in the public domain.
*/

#include <Bounce.h>

#define ANALOG_CENTER 512
int Xstick;
int Ystick;
int upperBound=530;
int lowerBound=495;

// Create Bounce objects for each button.  The Bounce object
// automatically deals with contact chatter or "bounce", and
// it makes detecting changes very simple.
// 10 = 10 ms debounce time which is appropriate for most mechanical pushbuttons

// Action buttons 
Bounce button0 = Bounce(13, 10);
Bounce button1 = Bounce(14, 10);  
Bounce button2 = Bounce(15, 10); 
Bounce button3 = Bounce(16, 10); 

// Select
Bounce button4 = Bounce(17, 10);

// D-Pad
Bounce button5 = Bounce(0, 10);
Bounce button6 = Bounce(1, 10);  
Bounce button7 = Bounce(2, 10);  
Bounce button8 = Bounce(3, 10);  

// Start
Bounce button9 = Bounce(4, 10);

// Shoulder buttons 
Bounce button10 = Bounce(9, 10);
Bounce button11 = Bounce(10, 10);  
Bounce button12 = Bounce(11, 10); 
Bounce button13 = Bounce(12, 10); 

void setup() {
  // Configure the pins for input mode with pullup resistors.
  // The pushbuttons connect from each pin to ground.  When
  // the button is pressed, the pin reads LOW because the button
  // shorts it to ground.  When released, the pin reads HIGH
  // because the pullup resistor connects to +5 volts inside
  // the chip.  LOW for "on", and HIGH for "off" may seem
  // backwards, but using the on-chip pullup resistors is very
  // convenient.  The scheme is called "active low", and it's
  // very commonly used in electronics... so much that the chip
  // has built-in pullup resistors!
  pinMode(0, INPUT_PULLUP);
  pinMode(1, INPUT_PULLUP);
  pinMode(2, INPUT_PULLUP);
  pinMode(3, INPUT_PULLUP);
  pinMode(4, INPUT_PULLUP);

  pinMode(9, INPUT_PULLUP);
  pinMode(10, INPUT_PULLUP);
  pinMode(11, INPUT_PULLUP);
  pinMode(12, INPUT_PULLUP);
  
  pinMode(13, INPUT_PULLUP);
  pinMode(14, INPUT_PULLUP);
  pinMode(15, INPUT_PULLUP);
  pinMode(16, INPUT_PULLUP);
  pinMode(17, INPUT_PULLUP);

}

void loop() {
  // Update all the buttons.  There should not be any long
  // delays in loop(), so this runs repetitively at a rate
  // faster than the buttons could be pressed and released.

  // Right Analogue Stick
  Xstick = analogRead(18);
  Ystick = analogRead(19);

  if ((Xstick > 512 && Xstick <= upperBound) || (Xstick < 512 && Xstick >= lowerBound)) {
      Xstick = 512;
    }
  
    if ((Ystick > 512 && Ystick <= upperBound) || (Ystick < 512 && Ystick >= lowerBound)) {
      Ystick = 512;
    }
  Joystick.X(Xstick);
  Joystick.Y(Ystick);
	
//  Joystick.X(((analogRead(18)-ANALOG_CENTER) * 1.6) + ANALOG_CENTER);
//  Joystick.Y(((analogRead(19)-ANALOG_CENTER) * 1.6) + ANALOG_CENTER);

  // Left Analogue Stick
  Joystick.Z(((analogRead(22)-ANALOG_CENTER) * 1.6) + ANALOG_CENTER);
  Joystick.Zrotate(((analogRead(23)-ANALOG_CENTER) * 1.6) + ANALOG_CENTER);

  button0.update();
  button1.update();
  button2.update();
  button3.update();
  button4.update();
  button5.update();
  button6.update();
  button7.update();
  button8.update();
  button9.update();
  button10.update();
  button11.update();
  button12.update();
  button13.update();

  // Check each button for "falling" edge.
  // Update the Joystick buttons only upon changes.
  // falling = high (not pressed - voltage from pullup resistor)
  // to low (pressed - button connects pin to ground)
  if (button0.fallingEdge()) {
    Joystick.button(1, 1);
  }
  if (button1.fallingEdge()) {
    Joystick.button(2, 1);
  }
  if (button2.fallingEdge()) {
    Joystick.button(3, 1);
  }
  if (button3.fallingEdge()) {
    Joystick.button(4, 1);
  }
  if (button4.fallingEdge()) {
    Joystick.button(5, 1);
  }
  if (button5.fallingEdge()) {
    Joystick.button(6, 1);
  }
  if (button6.fallingEdge()) {
    Joystick.button(7, 1);
  }
  if (button7.fallingEdge()) {
    Joystick.button(8, 1);
  }
  if (button8.fallingEdge()) {
    Joystick.button(9, 1);
  }
  if (button9.fallingEdge()) {
    Joystick.button(10, 1);
  }
  if (button10.fallingEdge()) {
    Joystick.button(11, 1);
  }
  if (button11.fallingEdge()) {
    Joystick.button(12, 1);
  }
  if (button12.fallingEdge()) {
    Joystick.button(13, 1);
  }
  if (button13.fallingEdge()) {
    Joystick.button(14, 1);
  }

  // Check each button for "rising" edge
  // Update the Joystick buttons only upon changes.
  // rising = low (pressed - button connects pin to ground)
  // to high (not pressed - voltage from pullup resistor)
  if (button0.risingEdge()) {
    Joystick.button(1, 0);
  }
  if (button1.risingEdge()) {
    Joystick.button(2, 0);
  }
  if (button2.risingEdge()) {
    Joystick.button(3, 0);
  }
  if (button3.risingEdge()) {
    Joystick.button(4, 0);
  }
  if (button4.risingEdge()) {
    Joystick.button(5, 0);
  }
  if (button5.risingEdge()) {
    Joystick.button(6, 0);
  }
  if (button6.risingEdge()) {
    Joystick.button(7, 0);
  }
  if (button7.risingEdge()) {
    Joystick.button(8, 0);
  }
  if (button8.risingEdge()) {
    Joystick.button(9, 0);
  }
  if (button9.risingEdge()) {
    Joystick.button(10, 0);
  }
  if (button10.risingEdge()) {
    Joystick.button(11, 0);
  }
  if (button11.risingEdge()) {
    Joystick.button(12, 0);
  }
  if (button12.risingEdge()) {
    Joystick.button(13, 0);
  }
  if (button13.risingEdge()) {
    Joystick.button(14, 0);
  }
}
      1 Reply Last reply Reply Quote 1
      • G
        grant2258 Banned
        last edited by

        @grant2258 said in N64 Analog Joystick Issue with Teensy LC:

        Joystick.X(((analogRead(18)-ANALOG_CENTER) * 1.6) + ANALOG_CENTER);

        you might want to change to your original code if you to change Joystick.X(Xstick); to Joystick.X( ((Xstick - ANALOG_CENTER) * 1.6) + ANALOG_CENTER);

        1 Reply Last reply Reply Quote 0
        • Steven33S
          Steven33
          last edited by

          Thank you so much! This works so much better, however, I tried to add the multiplier I had to the analog read ((((analogRead(18)-ANALOG_CENTER) * 1.6) + ANALOG_CENTER)). This made the controls back to what it was. I only did this tho since I wasn't able to configure the right joystick x-axis unless I increased the sensitivity. Is there a way to set the range of the analog input or something I should do differently in the Teensy code?

          New Code:

          /* Buttons to USB Joystick Example

   You must select Joystick from the "Tools > USB Type" menu

   This example code is in the public domain.
*/

#include <Bounce.h>

#define ANALOG_CENTER 512
int Xstick;
int Ystick;
int Zstick;
int Zstickrotate;
int upperBound=530;
int lowerBound=495;

// Create Bounce objects for each button.  The Bounce object
// automatically deals with contact chatter or "bounce", and
// it makes detecting changes very simple.
// 10 = 10 ms debounce time which is appropriate for most mechanical pushbuttons

// Action buttons 
Bounce button0 = Bounce(13, 10);
Bounce button1 = Bounce(14, 10);  
Bounce button2 = Bounce(15, 10); 
Bounce button3 = Bounce(16, 10); 

// Select
Bounce button4 = Bounce(17, 10);

// D-Pad
Bounce button5 = Bounce(0, 10);
Bounce button6 = Bounce(1, 10);  
Bounce button7 = Bounce(2, 10);  
Bounce button8 = Bounce(3, 10);  

// Start
Bounce button9 = Bounce(4, 10);

// Shoulder buttons 
Bounce button10 = Bounce(9, 10);
Bounce button11 = Bounce(10, 10);  
Bounce button12 = Bounce(11, 10); 
Bounce button13 = Bounce(12, 10); 

void setup() {
  // Configure the pins for input mode with pullup resistors.
  // The pushbuttons connect from each pin to ground.  When
  // the button is pressed, the pin reads LOW because the button
  // shorts it to ground.  When released, the pin reads HIGH
  // because the pullup resistor connects to +5 volts inside
  // the chip.  LOW for "on", and HIGH for "off" may seem
  // backwards, but using the on-chip pullup resistors is very
  // convenient.  The scheme is called "active low", and it's
  // very commonly used in electronics... so much that the chip
  // has built-in pullup resistors!
  pinMode(0, INPUT_PULLUP);
  pinMode(1, INPUT_PULLUP);
  pinMode(2, INPUT_PULLUP);
  pinMode(3, INPUT_PULLUP);
  pinMode(4, INPUT_PULLUP);

  pinMode(9, INPUT_PULLUP);
  pinMode(10, INPUT_PULLUP);
  pinMode(11, INPUT_PULLUP);
  pinMode(12, INPUT_PULLUP);
  
  pinMode(13, INPUT_PULLUP);
  pinMode(14, INPUT_PULLUP);
  pinMode(15, INPUT_PULLUP);
  pinMode(16, INPUT_PULLUP);
  pinMode(17, INPUT_PULLUP);

}

void loop() {
  // Update all the buttons.  There should not be any long
  // delays in loop(), so this runs repetitively at a rate
  // faster than the buttons could be pressed and released.

  // Right Analogue Stick
  Xstick = analogRead(18);
  Ystick = analogRead(19);

  if ((Xstick > 512 && Xstick <= upperBound) || (Xstick < 512 && Xstick >= lowerBound)) {
      Xstick = 512;
    }
  
    if ((Ystick > 512 && Ystick <= upperBound) || (Ystick < 512 && Ystick >= lowerBound)) {
      Ystick = 512;
    }
  Joystick.X(Xstick);
  Joystick.Y(Ystick);

  // Left Analogue Stick
  Zstick = analogRead(22);
  Zstickrotate = analogRead(23);

  if ((Zstick > 512 && Zstick <= upperBound) || (Zstick < 512 && Zstick >= lowerBound)) {
      Zstick = 512;
    }
  
    if ((Zstickrotate > 512 && Zstickrotate <= upperBound) || (Zstickrotate < 512 && Zstickrotate >= lowerBound)) {
      Zstickrotate = 512;
    }
  Joystick.Z(Zstick);
  Joystick.Zrotate(Zstickrotate);
  
//  Joystick.X(((analogRead(18)-ANALOG_CENTER) * 1.6) + ANALOG_CENTER);
//  Joystick.Y(((analogRead(19)-ANALOG_CENTER) * 1.6) + ANALOG_CENTER);


//  Joystick.Z(((analogRead(22)-ANALOG_CENTER) * 1.6) + ANALOG_CENTER);
//  Joystick.Zrotate(((analogRead(23)-ANALOG_CENTER) * 1.6) + ANALOG_CENTER);

  button0.update();
  button1.update();
  button2.update();
  button3.update();
  button4.update();
  button5.update();
  button6.update();
  button7.update();
  button8.update();
  button9.update();
  button10.update();
  button11.update();
  button12.update();
  button13.update();

  // Check each button for "falling" edge.
  // Update the Joystick buttons only upon changes.
  // falling = high (not pressed - voltage from pullup resistor)
  // to low (pressed - button connects pin to ground)
  if (button0.fallingEdge()) {
    Joystick.button(1, 1);
  }
  if (button1.fallingEdge()) {
    Joystick.button(2, 1);
  }
  if (button2.fallingEdge()) {
    Joystick.button(3, 1);
  }
  if (button3.fallingEdge()) {
    Joystick.button(4, 1);
  }
  if (button4.fallingEdge()) {
    Joystick.button(5, 1);
  }
  if (button5.fallingEdge()) {
    Joystick.button(6, 1);
  }
  if (button6.fallingEdge()) {
    Joystick.button(7, 1);
  }
  if (button7.fallingEdge()) {
    Joystick.button(8, 1);
  }
  if (button8.fallingEdge()) {
    Joystick.button(9, 1);
  }
  if (button9.fallingEdge()) {
    Joystick.button(10, 1);
  }
  if (button10.fallingEdge()) {
    Joystick.button(11, 1);
  }
  if (button11.fallingEdge()) {
    Joystick.button(12, 1);
  }
  if (button12.fallingEdge()) {
    Joystick.button(13, 1);
  }
  if (button13.fallingEdge()) {
    Joystick.button(14, 1);
  }

  // Check each button for "rising" edge
  // Update the Joystick buttons only upon changes.
  // rising = low (pressed - button connects pin to ground)
  // to high (not pressed - voltage from pullup resistor)
  if (button0.risingEdge()) {
    Joystick.button(1, 0);
  }
  if (button1.risingEdge()) {
    Joystick.button(2, 0);
  }
  if (button2.risingEdge()) {
    Joystick.button(3, 0);
  }
  if (button3.risingEdge()) {
    Joystick.button(4, 0);
  }
  if (button4.risingEdge()) {
    Joystick.button(5, 0);
  }
  if (button5.risingEdge()) {
    Joystick.button(6, 0);
  }
  if (button6.risingEdge()) {
    Joystick.button(7, 0);
  }
  if (button7.risingEdge()) {
    Joystick.button(8, 0);
  }
  if (button8.risingEdge()) {
    Joystick.button(9, 0);
  }
  if (button9.risingEdge()) {
    Joystick.button(10, 0);
  }
  if (button10.risingEdge()) {
    Joystick.button(11, 0);
  }
  if (button11.risingEdge()) {
    Joystick.button(12, 0);
  }
  if (button12.risingEdge()) {
    Joystick.button(13, 0);
  }
  if (button13.risingEdge()) {
    Joystick.button(14, 0);
  }
}
          1 Reply Last reply Reply Quote 0
          • G
            grant2258 Banned
            last edited by

            Im not sure what your wanting to do here do you want to scale +- 1024 to +-32678 ?

            1 Reply Last reply Reply Quote 0
            • Steven33S
              Steven33
              last edited by

              When I try to configure the analog stick in Retropie, some of the axis doesn't get picked up. However, when I test the joysticks in the terminal, jstest /dev/input/js1, they are showing up. How can change the range of the analog sticks so they can be configured or how can I increase their sensitivity?

              G 1 Reply Last reply Reply Quote 0
              • G
                grant2258 Banned @Steven33
                last edited by grant2258

                Just finished work what is the minimum and maximum picked up with jstest for each axis?

                1 Reply Last reply Reply Quote 0
                • Steven33S
                  Steven33
                  last edited by Steven33

                  LEFT JOYSTICK (approximate values):

                  • X = 2400, -2400

                  • Y = 2400, -2400

                  RIGH JOYSTICK (approximate values):

                  • X = 2200, -2500

                  • Y = 2400, -2400

                  1 Reply Last reply Reply Quote 0
                  • G
                    grant2258 Banned
                    last edited by

                    I only gave a few Arduinos here they need some extra work to get hid working when i get time ill have a look whats going on. Are them values a standard return ie.
                    Joystick.X(Xstick);

                    1 Reply Last reply Reply Quote 0
                    • Steven33S
                      Steven33
                      last edited by

                      What do you mean a standard return? The values are what it says when I run jstest /dev/input/js1 and move the sticks around. I'm using the new code that I posted yesterday. So its just Joystick.X(Xstick). It seems like the range for joysticks aren't in line with the range Retorpie has. How can I increase the sensitivity of the analog read without messing up the corrections we made to the old code? Before I just did Joystick.X(((analogRead(18)-ANALOG_CENTER) * 1.6) + ANALOG_CENTER);. However, ANALOG_CENTER equals a fixed value and we know the center values are in a range so when I tried to add it in, the joysticks went back to their messed up their state a couple of days ago.

                      1 Reply Last reply Reply Quote 0
                      • G
                        grant2258 Banned
                        last edited by

                        try this code

                        /* Buttons to USB Joystick Example

   You must select Joystick from the "Tools > USB Type" menu

   This example code is in the public domain.
*/

#include <Bounce.h>

#define ANALOG_CENTER 512
int Xstick;
int Ystick;
int Zstick;
int Zstickrotate;
int upperBound=530;
int lowerBound=495;

// Create Bounce objects for each button.  The Bounce object
// automatically deals with contact chatter or "bounce", and
// it makes detecting changes very simple.
// 10 = 10 ms debounce time which is appropriate for most mechanical pushbuttons

// Action buttons 
Bounce button0 = Bounce(13, 10);
Bounce button1 = Bounce(14, 10);  
Bounce button2 = Bounce(15, 10); 
Bounce button3 = Bounce(16, 10); 

// Select
Bounce button4 = Bounce(17, 10);

// D-Pad
Bounce button5 = Bounce(0, 10);
Bounce button6 = Bounce(1, 10);  
Bounce button7 = Bounce(2, 10);  
Bounce button8 = Bounce(3, 10);  

// Start
Bounce button9 = Bounce(4, 10);

// Shoulder buttons 
Bounce button10 = Bounce(9, 10);
Bounce button11 = Bounce(10, 10);  
Bounce button12 = Bounce(11, 10); 
Bounce button13 = Bounce(12, 10); 

void setup() {
  // Configure the pins for input mode with pullup resistors.
  // The pushbuttons connect from each pin to ground.  When
  // the button is pressed, the pin reads LOW because the button
  // shorts it to ground.  When released, the pin reads HIGH
  // because the pullup resistor connects to +5 volts inside
  // the chip.  LOW for "on", and HIGH for "off" may seem
  // backwards, but using the on-chip pullup resistors is very
  // convenient.  The scheme is called "active low", and it's
  // very commonly used in electronics... so much that the chip
  // has built-in pullup resistors!
  pinMode(0, INPUT_PULLUP);
  pinMode(1, INPUT_PULLUP);
  pinMode(2, INPUT_PULLUP);
  pinMode(3, INPUT_PULLUP);
  pinMode(4, INPUT_PULLUP);

  pinMode(9, INPUT_PULLUP);
  pinMode(10, INPUT_PULLUP);
  pinMode(11, INPUT_PULLUP);
  pinMode(12, INPUT_PULLUP);
  
  pinMode(13, INPUT_PULLUP);
  pinMode(14, INPUT_PULLUP);
  pinMode(15, INPUT_PULLUP);
  pinMode(16, INPUT_PULLUP);
  pinMode(17, INPUT_PULLUP);

}

void loop() {
  // Update all the buttons.  There should not be any long
  // delays in loop(), so this runs repetitively at a rate
  // faster than the buttons could be pressed and released.

  // Right Analogue Stick
  Xstick = analogRead(18);
  Ystick = analogRead(19);

  if ((Xstick > 512 && Xstick <= upperBound) || (Xstick < 512 && Xstick >= lowerBound)) {
      Xstick = 512;
    }
  
    if ((Ystick > 512 && Ystick <= upperBound) || (Ystick < 512 && Ystick >= lowerBound)) {
      Ystick = 512;
    }

Xstick = (Xstick - 511) * 2 + 511;
 // cap result
 if (Xstick > 1023)
 Xstick=1023;
 if (Xstick < 0)
 Xstick = 0;
 
  Joystick.X(Xstick);
  Joystick.Y(Ystick);

  // Left Analogue Stick
  Zstick = analogRead(22);
  Zstickrotate = analogRead(23);

  if ((Zstick > 512 && Zstick <= upperBound) || (Zstick < 512 && Zstick >= lowerBound)) {
      Zstick = 512;
    }
  
    if ((Zstickrotate > 512 && Zstickrotate <= upperBound) || (Zstickrotate < 512 && Zstickrotate >= lowerBound)) {
      Zstickrotate = 512;
    }
  Joystick.Z(Zstick);
  Joystick.Zrotate(Zstickrotate);
  
//  Joystick.X(((analogRead(18)-ANALOG_CENTER) * 1.6) + ANALOG_CENTER);
//  Joystick.Y(((analogRead(19)-ANALOG_CENTER) * 1.6) + ANALOG_CENTER);


//  Joystick.Z(((analogRead(22)-ANALOG_CENTER) * 1.6) + ANALOG_CENTER);
//  Joystick.Zrotate(((analogRead(23)-ANALOG_CENTER) * 1.6) + ANALOG_CENTER);

  button0.update();
  button1.update();
  button2.update();
  button3.update();
  button4.update();
  button5.update();
  button6.update();
  button7.update();
  button8.update();
  button9.update();
  button10.update();
  button11.update();
  button12.update();
  button13.update();

  // Check each button for "falling" edge.
  // Update the Joystick buttons only upon changes.
  // falling = high (not pressed - voltage from pullup resistor)
  // to low (pressed - button connects pin to ground)
  if (button0.fallingEdge()) {
    Joystick.button(1, 1);
  }
  if (button1.fallingEdge()) {
    Joystick.button(2, 1);
  }
  if (button2.fallingEdge()) {
    Joystick.button(3, 1);
  }
  if (button3.fallingEdge()) {
    Joystick.button(4, 1);
  }
  if (button4.fallingEdge()) {
    Joystick.button(5, 1);
  }
  if (button5.fallingEdge()) {
    Joystick.button(6, 1);
  }
  if (button6.fallingEdge()) {
    Joystick.button(7, 1);
  }
  if (button7.fallingEdge()) {
    Joystick.button(8, 1);
  }
  if (button8.fallingEdge()) {
    Joystick.button(9, 1);
  }
  if (button9.fallingEdge()) {
    Joystick.button(10, 1);
  }
  if (button10.fallingEdge()) {
    Joystick.button(11, 1);
  }
  if (button11.fallingEdge()) {
    Joystick.button(12, 1);
  }
  if (button12.fallingEdge()) {
    Joystick.button(13, 1);
  }
  if (button13.fallingEdge()) {
    Joystick.button(14, 1);
  }

  // Check each button for "rising" edge
  // Update the Joystick buttons only upon changes.
  // rising = low (pressed - button connects pin to ground)
  // to high (not pressed - voltage from pullup resistor)
  if (button0.risingEdge()) {
    Joystick.button(1, 0);
  }
  if (button1.risingEdge()) {
    Joystick.button(2, 0);
  }
  if (button2.risingEdge()) {
    Joystick.button(3, 0);
  }
  if (button3.risingEdge()) {
    Joystick.button(4, 0);
  }
  if (button4.risingEdge()) {
    Joystick.button(5, 0);
  }
  if (button5.risingEdge()) {
    Joystick.button(6, 0);
  }
  if (button6.risingEdge()) {
    Joystick.button(7, 0);
  }
  if (button7.risingEdge()) {
    Joystick.button(8, 0);
  }
  if (button8.risingEdge()) {
    Joystick.button(9, 0);
  }
  if (button9.risingEdge()) {
    Joystick.button(10, 0);
  }
  if (button10.risingEdge()) {
    Joystick.button(11, 0);
  }
  if (button11.risingEdge()) {
    Joystick.button(12, 0);
  }
  if (button12.risingEdge()) {
    Joystick.button(13, 0);
  }
  if (button13.risingEdge()) {
    Joystick.button(14, 0);
  }
}
                        1 Reply Last reply Reply Quote 1
                        • G
                          grant2258 Banned
                          last edited by grant2258

                          looked into this a little more seems the zaxis is 8 bits. Im not sure of your exact setup or what lib you are using you would need to check with your lib.

                          https://github.com/NicoHood/HID/blob/efa8d0f16596279d6269982471f55d186449e311/src/HID-APIs/GamepadAPI.h#L86-L93

                          1 Reply Last reply Reply Quote 0
                          • Steven33S
                            Steven33
                            last edited by

                            Well, I tried your code and everything seems to be working good so I'm going to say this fixed the issue. Thank you so much!

                            1 Reply Last reply Reply Quote 1
                            • G
                              grant2258 Banned
                              last edited by

                              no problems at all glad it worked out :)

                              1 Reply Last reply Reply Quote 0
                              • DTEAMD
                                DTEAM
                                last edited by

                                Simple comment. I had the same issue but my lowerBound had to be fix to value 490. It's important to check the value when your stick go back in place. My left stick showed a value of 491 when It came back from left to center. Now, Everything's working fine

                                I suggest to use joy.cpl to find It.

                                https://www.pjrc.com/teensy/td_joystick.html

                                1 Reply Last reply Reply Quote 0
                                • First post
                                  Last post

                                Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.

                                Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.