Suggestions for ports

quicksilver

I have literally spent all day on this, I bring you Morrowind via OpenMW! Currently launching directly through RetroPie with controller support. Performance is good :)

This is the last one on my list for now. So next I plan to do some additional testing and then I will write up build instructions for the ports I have working well.

A Former User

I found a couple bugs in my script. I'll post an update shortly.

quicksilver

So for at least three of the ports that I have running through an x session, if I set the in-game video option to fullscreen, the mouse and/or keyboard stop responding in-game. Anyone have any ideas what could be the cause of this? This seems to happen on OpenMW, dhewm3, and openjk.

mitu

@quicksilver Focus issues ? Try running a minimal window manager and see if it fixes it.

quicksilver

@mitu apologies for my ignorance 😬 but would that be something like matchbox? If so how would I get that running in conjunction with XINIT? I played around with matchbox before but was never able to tell if I was doing correctly.

mitu

@quicksilver Yes, something like matchbox should do. Look at the steamlink port to see how it's used.

A Former User

@quicksilver I found a fix for that. Open the .cfg file (openjk_sp.cfg), set the resolution to whatever your monitor resolution is. Your looking for:

seta r_customheight "1440" <-- your resolution height
seta r_customwidth "2560" <---- your resolution width
seta r_mode "-1" <-necessary for custom resolution (preventa the game from overriding your settings
seta cg_fov "96.4" <- adjusts the field of view (optional)

Hmm, re-reading your post, this may or may not help. It helped me with fullscreen with the mouse moving the screen focus away from the game.

quicksilver

@gderber I can get the screen fullscreen by matching the in game resolution to the resolution picked in runcommand even if windowed mode is selected. The issue is that if a user were to select fullscreen the mouse/keyboard would lose focus and they would be forced to edit a config somewhere to fix it. Which isn't a very good solution in my opinion. I would like to make running these games as foolproof as possible.

A Former User

@quicksilver I've been thinking about that. I don't like it either.

Have you run ioquake3? Do you have the same problem their. It's got a couple run switches that set the game resolution at run time. Those switches should work for the other quake3 engine games. OpenMW will need another solution.

quicksilver

@mitu so I tried it and while it does keep control of the keyboard and mouse properly, it unfortunately will only launch the game in 1080p mode. All the runcommand video options are ignored and the list of resolutions in game only show 1080p as an option regardless of whether I choose windowed or fullscreen mode.

VictimRLSH

StarCraft is playing fine, but I'm getting some hanging and glitching from the FMV cutscenes. It also looks like in order to play the BroodWar scenarios, I will need to do an update from the BattleNet. The un-updated vanilla StarCraft runs, but a fresh install from the original BroodWar disc gives a message that a re-install is needed.

mitu

@quicksilver How are you launching the game ? Post the exact command from emulators.cfg.

quicksilver

@mitu

openmw = "xset -dpms s off s noblank matchbox-window-manager & OPENMW_DECOMPRESS_TEXTURES=1 /home/pi/morrowind/openmw"

quicksilver

@gderber Although now, that I think of it, I dont think an x session is needed to run openjk. It seems to run fine without it. But would still be good to know for the ports that do require an x session.

mitu

 openmw = "xset -dpms s off s noblank matchbox-window-manager & OPENMW_DECOMPRESS_TEXTURES=1 /home/pi/morrowind/openmw"

I don't see this launching an X session - are you sure it's not starting openmw directly (without X) ?

Create a simple .sh file with:

#!/usr/bin/env bash
matchbox-window-manager & 
OPENMW_DECOMPRESS_TEXTURES=1 /home/pi/morrowind/openmw"

and modify the launching command to be

openmw = "XINIT:</path/to/script>

Runcommand will take care of adding the xset commands for you on start-up.

quicksilver

Thank you again, this worked. I was starting to suspect something was amiss, some of the graphics were not correct on some of the games I was testing. Everything seems to be good now and with matchbox the game retains focus of the mouse and keyboard.

A Former User

I've updated my scripts. I've posted them as separate topics to try and keep the feedback better organized.

I'm working on a few others
Decaf: Wii-U emulator

Lr-dhewm3

Etlegacy: Wolfenstein Enemy Territory

VictimRLSH

So how would a noob go about using these scripts? Open a terminal window and "sudo ./scriptname.sh"?

mitu

@VictimRLSH You copy the scripts to their corresponding location - under $HOME/RetroPie-Setup/scriptmodules/ports - then you can run the setup normally and choose to install the new port.

quicksilver

@gderber said in Suggestions for ports:

Etlegacy: Wolfenstein Enemy Territory

^ This seems like a good candidate. @tpo1990 got rtcw running really well, you should checkout his script module here https://retropie.org.uk/forum/topic/22554/return-to-castle-wolfenstein-iortcw-source-port