Pi Zero 2 released
-
@luddo183 Also only weakened via the DTB frequency definitions as all Pi3's are essentially the same.
The diff between the 3b & 3b+ is purely a redesign of the PCB for thermal distribution that they gave a factory OC.
Same chip though but the Z2 is all ceramic package with a ram sandwich on top, so a bit harder to cool, but they seemed to of done a stellar job with the PCB heat distribution with a much smaller PCB.https://www.raspberrypi.com/documentation/computers/config_txt.html#overclocking-options
Has all the settings whilst some of the over_voltage has already been applied to the 3+ so starts at zero again.The only thing that is puzzling me is that setting v3d_freq=400 on the Z2 so its same as the Pi3's seems to provide 10 more points on the glmark2 score which is good but was expecting the same?
The Raspberry Pi 4 Vulkan Driver "V3DV" Merged Into Mesa 20.3 and don't know if that is ever coming for lesser Pi's
-
@mitu said in Pi Zero 2 released:
@matchaman said in Pi Zero 2 released:
As for RetroPie, should the existing 2/3 version be compatible? I hope so!
The 4.7.1 image is not compatible, but a weekly snapshot image should work.
The 07-11 images works fine. I had some sound issues, but nothing unsolvable.
Is there any place to follow the development here?
To see what's new in new images and even more important when new images are going to be released?
Didn't found that in the forum or elsewhere at the page.Btw.: awesome work, guys! Totally love my portable CPC
-
@x_speed said in Pi Zero 2 released:
Is there any place to follow the development here?
Development happens on the public Github repository - https://github.com/RetroPie/RetroPie-Setup.
To see what's new in new images and even more important when new images are going to be released?
When a new image is released, it's usually posted on the RetroPie site. As for when, there isn't a strict schedule or a roadmap for it.
-
@mitu Hope you don't mind - fixed your link.
To help us help you - please make sure you read the sticky topics before posting - https://retropie.org.uk/forum/topic/3/read-this-first
-
I am excited to get the PI Zero W 2 and put it in my GPI case. But it needs a good OS of course so I'm gonna wait until that's ready.
-
@paradoxgbb One thing to consider in terms of battery life is installing a rechargeable battery. I can confirm that I have successfully used these mod instructions:
-
@cnoto Thanks, interesting.
As I understand it you can stick rechargeables in the AA slots and can also plug directly into a USB bank if you have to as well.
My GPi case should be arriving today or tomorrow so I'll have to give it a try.
-
@paradoxgbb comes with a DC USB cable as well as another option. It's how I use it mainly
-
Since the Zero2 uses the ARMv8 architecture (instead of ARMv6 on the "original" Zero).
Which image is the correct/better one to use? zero, or 2/3?
-
@x_speed the 2-3 image. But use the weekly release version
-
@brunnis do you have a copy of the October build please? There doesn’t seem to be any weekly builds up anymore? Or are new ones due?
Thanks
-
@tjfisher84 said in Pi Zero 2 released:
There doesn’t seem to be any weekly builds up anymore?
Probably something failed during the weekly build and the images haven't been created.
You can install on-top of Raspberry Pi OS (Buster) (download. from here)using the manual method. -
I have paused them temporarily due to my server being in the process of some updates. The last weekly build is fine to use.
-
Ah they shouldn't have gone sorry. I must have forgotten to stop a cron job that removes old ones. I'll put a build back shortly.
-
I have restored the images - https://files.retropie.org.uk/images/weekly/
-
@paradoxgbb I mentioned this in the other GPi thread, but you might need rechargeables with decent current output.
I've seen reports on Reddit that cheap low-capacity batteries cut out with the Zero 2W in the GPi case.
I am using Ikea Ladda 2450 in mine and they're fine. Panasonic Eneloop Pro are also reportedly good.
-
@suprjami Yeah, I'm using the same Ikea batteries and have had no issues so far.
-
I've just used the normal version for the pi2/3 and added the appropriate boot file for the zero2
https://github.com/raspberrypi/firmware/blob/master/boot/bcm2710-rpi-zero-2.dtb
[Edit] nvm, i see the weeklies are back -
@suprjami , @Brunnis , yeah, apparently it's really finicky on what batteries it'll take. Cheaper but higher capacity ones like energizer and ravpower ones don't work, but lower capacity enloops do, at least for me. Someone else just mentioned enloop pros as well and they are on the pricy side but I just took the plunge anyway.
Overall, very impressed with this thing, it can pack a decent punch. Totally worth drilling the hole in the top, IMO. Me and some other folks are having some trouble with Wifi cutting out while transferring large files, we're trying to understand that better...
There's some great additional developments
Silver-X produced a tuned image here: https://retropie.org.uk/forum/topic/31708/gpi-zero-2-v1-17-retroflag-gpi-image-for-pi-zero-2-w/14?_=1638400023362
I wasn't able to get wifi working on it but lifted the toggle scripts from him and they are very, very useful.
Looks like we'll have a wifi osk very soon, hopefully:
-
hi. i wonder is there any pi zero W 2 SD images out yet? 32gb? 64gb?
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.