lr-mame2003 rom specific rotation + aspect issues

edmaul69

@KillerQ nice setup. If you decide you dont want the kink in the cable, you can buy an angled hdmi cable. I too have one of those keyboards. Im thinking about rewiring the top 4 buttons on the right so i can use it as a controller if i want. Unless i can find a way to get retroarch to recognize them.

KillerQ

@edmaul69 said in lr-mame2003 rom specific rotation + aspect issues:

@KillerQ nice setup. If you decide you dont want the kink in the cable, you can buy an angled hdmi cable. I too have one of those keyboards. Im thinking about rewiring the top 4 buttons on the right so i can use it as a controller if i want. Unless i can find a way to get retroarch to recognize them.

Thanks, I appreciate it. I almost bought one of those angles cables, but this 1.5 foot one that I have works great and it's light - so there's no strain.

That small keyboard is great for basic, quick input, but the mouse dpi sucks. The Logitech K400 is my main keyboard with this unit.

Here's a video:

KillerQ

Here's a video of the finished unit:

MWGemini

@KillerQ Nice work! Now you just need to attach a stepper motor to it and make it automatically rotate the screen for games that are configured to be vertical...

dankcushions

@KillerQ that is so rad to see it in action! great job :D

KillerQ

@dankcushions said in lr-mame2003 rom specific rotation + aspect issues:

@KillerQ that is so rad to see it in action! great job :D

Thanks, Dank. That means a lot coming from you!!

Dj'KillaD

@KillerQ I'm also trying to rotate the screen via retroarch menu. Is there any way to save the rotation change per game?

KillerQ

@Dj'KillaD said in lr-mame2003 rom specific rotation + aspect issues:

@KillerQ I'm also trying to rotate the screen via retroarch menu. Is there any way to save the rotation change per game?

I use rom-specific .cfg files for each game, but there's a quicker way as well.

When you come across a game that you want portrait, at least for Retroarch-based MAME games, just go into the Retroarch settings while you're in the game, then go to video settings and change rotation and aspect ratio.

Once that's done, go back to the quick menus and his SAVE GAME SETTINGS. Those particular settings will be saved for that game.

Carnage9270

Sorry for resurrecting this thread, but I have a problem I can't seem to figure out. I have the 7" touchscreen and case that requires me to rotate the screen 180 degrees so it's not upside down. I edited boot/cmdline.cfg to do this. Everything works as it should except for vertical games. I have enabled tate mode and my arcade vertical games look like this:

http://s112.photobucket.com/user/carnage9270/media/20170223_143404.jpg.html

Any help would be greatly appreciated!

caver01

@Carnage9270 I can tell you that I have always used a display rotated 180 using my boot/config.txt not cmdline.cfg.

You will need to provide a lot more detail. You added this comment to an old thread, but we have no idea what image you are using, what version of the Pi you have, or even what emulator you are launching. You mentioned tate mode, so we could assume you are running lr-mame2003 but all we can know for sure is you are running 1943.

You should read this, then share everything about your system and software.

Then, tell us what does it look like without tate mode?

Then, tell us what you want it to look like. Do you want it rotated sideways another 90 degrees?

I would start exploring per-romsettings to find out what works on your system. I would disable the tate mode, see what it looks like, then create a config file next to your ROM called romname.zip.cfg and put this inside:

allow_video_rotate = "true"
video_rotation = "3"

Then, try adjusting the rotation value 1-4 and see what you get.

dankcushions

actually if you're using tate mode in mame2003 you will want video_allow_rotate set to false, and you set it in the mame2003 config, not per-rom. more info: https://github.com/retropie/retropie-setup/wiki/lr-mame2003#tate-mode

but yes, we need more info :)

caver01

@dankcushions said in lr-mame2003 rom specific rotation + aspect issues:

actually if you're using tate mode in mame2003 you will want video_allow_rotate set to false, and you set it in the mame2003 config, not per-rom. more info: https://github.com/retropie/retropie-setup/wiki/lr-mame2003#tate-mode

but yes, we need more info :)

Of course. It's one way, or the other way.

Thorr69

Forgive the necro on this, but this thread has helped me greatly and I am sure many other folk come through here searching for the same answers and follow the advice here. In light of that, I thought it important to point out that I followed the solution presented here:

@dankcushions said in lr-mame2003 rom specific rotation + aspect issues:

my advice is to put per-rom overrides in /opt/retropie/configs/all/retroarch/config/MAME 2003/

this is the official retroarch-supported way of using rom overrides. there's a few advantages (settings don't migrate to your main config even if save_on_exit is turned on, etc)

I noticed, though, that the settings broke after some recent update. It seems now that the proper directory structure for this to work has been changed to the following:
/opt/retropie/configs/all/retroarch/config/mame2003/

If you opt to use the other method of placing a romname.zip.cfg file in your ROMs directory instead, then it still works.

So, for future readers of this thread, I hope this helps.

Romstar

I'm having a bitch of a time with changing "tate" basically it goes like this :

I'm trying to rotate my games for use with a permanent vertical monitor... I was told to use : under /opt/retropie/configs/all/ in the configuration editor. The option I changed :

mame2003-tate_mode = "enabled"

While I'm able to change it with WinSCP within the config file from" disabled" to "enabled", when I reset my pi it reverts back to disabled, WHY !? No matter what I do it's not SAVING the changes i'm making while manually adjusting the config file within notepad++

dankcushions

@Romstar can you do the change within the RGUI itself? hotkey + X, go into 'options'

Thorr69

@Thorr69 said in lr-mame2003 rom specific rotation + aspect issues:

Forgive the necro on this, but this thread has helped me greatly and I am sure many other folk come through here searching for the same answers and follow the advice here. In light of that, I thought it important to point out that I followed the solution presented here:

@dankcushions said in lr-mame2003 rom specific rotation + aspect issues:

my advice is to put per-rom overrides in /opt/retropie/configs/all/retroarch/config/MAME 2003/

this is the official retroarch-supported way of using rom overrides. there's a few advantages (settings don't migrate to your main config even if save_on_exit is turned on, etc)

I noticed, though, that the settings broke after some recent update. It seems now that the proper directory structure for this to work has been changed to the following:
/opt/retropie/configs/all/retroarch/config/mame2003/

If you opt to use the other method of placing a romname.zip.cfg file in your ROMs directory instead, then it still works.

So, for future readers of this thread, I hope this helps.

Just to keep this updated, the directory changed again (RPi 4.5). The new directory is:
/opt/retropie/configs/all/retroarch/config/MAME 2003 (0.78)/

Riverstorm

@Thorr69 - Just to add to that I think the folder change was to correct a Retroarch Netplay issue and not so much of a core or RetroPie issue/change. If you're using an older version prior to 4.5 like 4.3 or 4.4 it will probably still use the old path unless your update RA then the new path will apply.