@mitu said in problem with configuration file saving... (Treaded video always turned on issue):

Your RetroArch version is not up-to-date, did you only update the RetroPie-Setup script without updating the packages ?

Maybe-maybe....

@anmag70 Is your hotkey button also select?

Something worth checking.. If you use multiple controllers (I do too), the RetroArch config may be setup to use a different controller as the default. If you have a keyboard, trigger theRetroArch menu and check the sttings. If it IS set to a different controller, and you typically use the one it's not set to, change it and save it as a core override. From now on, it'll load up the override every time a game loads, and the controller you like to use will be set as the default.

thank you :) it worked!

hey mate, i'm stupid.
i wiring alla exactly buttons and joy of player 1 in player 1 side of xin mo.
and player 2 in p0 side of xin-mo.
i unmount all wirings, and so, i after swap all wiring:
so
player 1wired to p0 side
player 2wiredto p1 side

joystick of player 1 and 2 in up and down movements WORKS,
select and start of p1are swapped after mapping and reboot,
select and start of p2the same swapped after mapping and reboot,

i can fix this about swapping select and start of player1?

here my cmdline.txt

# code block dwc_otg.lpm_enable=0 console=serial0,115200 console=tty2 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet loglevel=3 logo.nologo consoleblank=0 usbhid.quirks=0x16c0:0x05e1:0x040 plymouth.enable=0

@speedbird747 tried both options still no luck.