mame2003-plus: hundreds of new games, improved input, features, new bugs - now with runahead support
-
@arcadez2003 I just registered to thank you (and do some suggestions with encrypted system18 stuff) but it looks like I'll be adding those myself sometime in the future. Thank you again for all the backporting man!
-
How do you know the names for the samples for a game with samples support? I'm trying to set up Teki Paki.
By the way, thank you @arcadez2003 for such a great work. You can be proud, it's an excellent work.
-
@Asure said in mame2003-plus: hundreds of new games, improved input, features, new bugs - now with runahead support:
@arcadez2003 I just registered to thank you (and do some suggestions with encrypted system18 stuff) but it looks like I'll be adding those myself sometime in the future. Thank you again for all the backporting ma
What are your suggestions with regards to Sega System18.??
-
@REK607 said in mame2003-plus: hundreds of new games, improved input, features, new bugs - now with runahead support:
How do you know the names for the samples for a game with samples support? I'm trying to set up Teki Paki.
By the way, thank you @arcadez2003 for such a great work. You can be proud, it's an excellent work.
Usually the samples are named the same as the game rom eg for example dkong for both, Teki Paki is a special case as you wont find the sample on twistys site,
im not sure if we can link to samples on here otherwise i'd just link you to a site that hosts the ThunderMAME Toaplan samples or send it your way myself.Arcade Addict
-
@arcadez2003 - Thanks for all the hard work you, @grant2258, @markwkidd and others put into this core. It's my main core for arcade gaming with some FBNeo and AdvMAME thrown into the mix also. Hopefully the Libretro folks will keep it running as the RA frontend advances.
You know the fun doesn't have to end. There's always "newer" cores more suited for grafting code, if I remember correctly, that would run excellent on these low powered devices! ;) Nah, so many games and so little time!
But you know whenever someone says they are done there's always one more game, on a lazy afternoon that looks easy enough to throw into the mix! :)
@REK607 - If it helps the current list of games that require samples for m3plus:
armora.zip astrob.zip astrof.zip battles.zip berzerk.zip blockade.zip boothill.zip bosco.zip buckrog.zip carnival.zip circus.zip congo.zip cosmica.zip cosmicg.zip depthch.zip dkong.zip dkongjr.zip elim2.zip fantasy.zip frogs.zip galaga.zip ghox.zip gorf.zip gridlee.zip invaders.zip invinco.zip main.txt mario.zip monsterb.zip natodef.zip panic.zip polepos.zip pulsar.zip qbert.zip rallyx.zip reactor.zip ripoff.zip samples.txt sasuke.zip seawolf.zip sharkatt.zip solarq.zip spacefb.zip spaceod.zip spacewar.zip spacfury.zip starcas.zip starcrus.zip startrek.zip subroc3d.zip sundance.zip tacscan.zip tankbatt.zip targ.zip tekipaki.zip thehand.zip thief.zip turbo.zip vanguard.zip warrior.zip wow.zip xevious.zip zaxxon.zip zektor.zip -
@arcadez2003 that would be great. I have been able to put the sound to work but not fully, it's exiting the game suddenly after a few minutes of playing it.
-
@REK607 - I'm not sure what platform you running on but with RetroPie 4.5.1 on the Pi 3 Teki Paki runs well. I'm not very good at it but I had no crashes up to around level 20 or so. I played a few games. Any Tetris style game I was just never very good. =/
-
@arcadez2003 Thanks for all your work. This is really an awesome 2003!
-
@Asure i'd be interested to hear back from ya with regards to Sega System 18 and your plans around supporting more games by using the decrypted romsets.
-
@Riverstorm as I see it, my problem is the music is in a very high quality and it's closing the game after a few minutes. I can have sound effects but no music. I run RetroPie 4.5.1 on a Pi 3B. Tetris is a hard game indeed!
-
@REK607 - Ah, ok I am using a 15MB sample pack. I do have the bigger one that is 199MB but I haven't tried it yet. That may be the cause as it sounds like you already suspect. The bigger sample pack is 16 bit with a sample rate of 44100 Hz, (only single channel) so the bitrate is much much higher. The 15MB sounds quite good though even though some clipping most likely occurs at a sample rate of 8000, 8 bit, single channel. The game does run smooth and sounds good on the Pi. Tetris will always be a classic staple game but I like this a bit better, it's a fun little game! :)
-
@Riverstorm @arcadez2003 it's been a great success to convert the samples and now the game is fully working at 8000 Hz (about 33 MB), will try 16000 Hz soon.
-
Do you know if it is possible to disable the 'auto-centering' in the X axis of racing games? I'm using a spinner (mouse) as racing wheel and, when turning right or left, the car automatically self-centers in 1 or 2 seconds. The only solution to maintain the direction is to keep rotating the spinner in the same direction. This obviously happens in games that use a 270 driving wheel (such as Outrun), but also in games that supposedly used a 360 driving wheel (that is, a spinner or rotary enconder), such as Pole Position. You can see the exact effect in this video (using Mame 2003):
What I would like is to make the spinner act like in this video (which also uses MAME, albeit a newer Windows version):
-
Alright im not coming outta retirement just had some unfinished business namely some code sitting around which adds the proper M68705 MCU for both
Renegade and Nekketsu Kouha Kunio-kun, problem was i could not suss out a way to workaround some incompatible code which sends a signal between
the main CPU and the MCU so the games did not boot, so i drafted in dink of FBN dev fame since he wasn't too busy just now to take a look at the code
and he sorted it all out in under two mins.So thanks to him you can now play both of these games in MAME2003+ safe in the knowledge they are no longer using buggy MCU simulation code
and as such they can now be considered 100% faithfully emulated.....
Funny enough although i dabble with this core i dont actually use it, but just incase someday i do decide to pick it up i added support for this wee game which i like,
and since like the above games we now have a proper M68705 MCU dump for it, it's finally 100% emulated so no better time to add support for this quirky little number
from the golden age of Taito....Rumba Lumber
-
Hello! I've been adding more and more sound/music to the games. Does Batsugun have full sound? I can only have it partially working, don't know why.
-
@REK607 iirc toaplan games got proper sound support only 2-3 years ago in MAME & FBNeo/FBAlpha, not sure @arcadez2003 backported this to mame2003+
-
The MAME2003 cores do not support the V25 varient of the NEC CPU which would be required along with a massive update of the Toaplan2 driver
to have full sound and music for Batsugan, Dogyunn, FixEight, Knuckle Bash and V-Five, the workload and doubts around the compatibility of the code
should we have attempted to backport it are the reasons why it was never attempted.As you noticed Batsugan and Knuckle Bash have some sound, this due to me adding support for simulated MSM6295 sound commands to the driver so at least you
get the Sfx in those games where as they were totally silent previously, so that and adding working bootlegs of FixEight and Knuckle Bash both of which have full sound and
music is at least making the best of a bad situation. -
@arcadez2003 that's an excellent answer, now I understand. By the way, I'm really happy with the way all metal slugs are working on the emulator too, so pleased!
-
@barbudreadmon said in mame2003-plus: hundreds of new games, improved input, features, new bugs - now with runahead support:
@REK607 iirc toaplan games got proper sound support only 2-3 years ago in MAME & FBNeo/FBAlpha, not sure @arcadez2003 backported this to mame2003+
Your thinking of the recent HD647180 sound MCU dumps, we did backport the ones for Fire Shark and Vimana adding full sound and music for those games to this core
however we ran into some problems with Ghox and Teki Paki as they would not boot with the new MCU code, so we just ported across the ThunderMAME samples for
both of those ones, so at least they would have sound and music should users have the samples in their set.Batsugun is a different matter entirely the sound was finally emulated in 2011 but we're missing the required CPU for this in the MAME2003 core..........
16th January 2011: David Haywood - Alex Jackson added support for the extended V25/V35 features to the NEC V20/V30 core in MAME. These features (timers, memory-mapped register banking, custom interrupt controller) are used by the sound programs of several Toaplan titles. He then hooked things up properly in the driver, giving full sound to Batsugun. Batsugun has unencrypted sound code, so was the easiest one to get running. V-Five / Grindstormer, Fix Eight, Knuckle Bash and Dogyuun will also benefit from this once their sound code has been fully decrypted. This is just a matter of time and a bit of effort in figuring out the programs. For the remaining Toaplan games (Teki Paki, Vimana, Fire Shark, Ghox, Whoopee JPN version) the sound MCUs need decapping, which will require funding / donations for this purpose.
-
@REK607 said in mame2003-plus: hundreds of new games, improved input, features, new bugs - now with runahead support:
@arcadez2003 that's an excellent answer, now I understand. By the way, I'm really happy with the way all metal slugs are working on the emulator too, so pleased!
Aye i like to fully explain the reasons why something cant be done :)
Sound for all the Toaplan games was on the target list, we managed to do most of em unfortunately due to code limitations we were unable to do them all.
Metal Slug's 4 and 5 were on the target list as well luckily we were able to get both of those to work Metal Slug 5 put up quite a fight though :)
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.