Arcade overlays 4:3, 1600x1200

Clyde

@svera Just saw that you added kingofb, gaplus, darius, truxton, and a new design for 19xx over the last couple of months. Thanks!

buzztea

can anyone add overlays here?

Ashpool

@buzztea Can't speak for svera, but as i see it we all droped in by ourselfs and as long as you provide the necessary files within a pull request (1600x1200, 1024x768 image together with the config files) I don't see a problem why you can't join/contribute - in fact, feel welcome if you can provide some new bezels ;)

@svera There was some discussion about parent/clone naming sheme already and some other, minor topics about the git repo, and i am not even sure how such a thing could/should be formulated/f*-manualed2bR, but in the long run there may be the need for a +-~ how2contribute&|styleguide for the repo .?.

svera

@ashpool @buzztea of course, repository is open to contributions. It is a good idea actually to create a contributions page listing all requirements, I'll do whenever I have time.

Clyde

@svera I just noticed your changes to the 1941 CA bezels in January. I have to say that I prefer the old ones, because they are much nicer looking and much more informative. The new ones, although being the originals, are far more bland and tell nothing about the game and its controls.

I know this is a matter of personal preference, so this is only meant as constructive feedback, and one idea: How about an "alt" version to have both bezel sets available?

Thanks for your ongoing good work.

svera

@clyde sure, honestly I thought about that before, and in the end is just a matter of taste, so having both alternatives is the best option

svera

@Clyde restored back the alternative versions of both 1941 and Varth bezels.

Clyde

@svera Thanks! 😀

Robert 79

@svera I have some bezels how can I share them

svera

@Robert-79 great! Open a pull request against https://github.com/svera/vertical-bezels-4-3

Robert 79

@svera Alright!

Robert 79

@svera send you a message to your email

Ashpool

one for lupin3

Edit: Juts noticed the "whitish" pixel(s) on the lower left border and updated/removed 'em in my branch, as my pull request wasn't ~~"commited"~~/(sorry, edit:)accepted so far, I am not sure whether I have to open a new one or not ... (but as the files where just overwritten in my repo, my guess is "not") ...

Ashpool

I just noticed, that my "in-forum-attached"-images are only shown as links now (or is it just my browser at the moment?) and not anymore as images, whereas external linked images are still shown as images.

Ok, it is offtopic, but anyone aware of recent forum changes or is in possession of an explanation for that observation?

P.S.: In the trying to get an deeper insight in this, I am going to edit one/some older posts of mine in here. So please, if you get some edit Notifications... this post is the explanation for 'em.

Edit: Ok, just noticed in one post of mine, there still is an image i've uploaded directly to the forum. So maybe there was a size limit introduced to show just a link vs. in previous times showing a shrinked image ??? Image-Linking the Url I got from the link that was shown for my prevoius images seem to work (lupin3 above) !?. I don't get it :/

Clyde

After nearly two years, I finally became motivated enough for another one. 😁

~~Mad Gear / L.E.D. Storm (pull request)~~ (edit: see below)

Another game from a time when 2011 was far into the future. 😉 (See the left text box.)

edit: I just learned that the bezel must be from an earlier variant of the game, LED Storm Rally 2011 (leds2011.zip), because the newer Mad Gear / LED Storm doesn't have the transform and popping features anymore that are described in the right text box of the bezel. See here for all of the many differences of both variants. I'll change the cfg files to leds2011, and maybe also make another bezel for madgear/ledstorm without the right side instructions, soon.

Clyde

leds2011: A new pull request, this time for the right version of the game. 😅

madgear & ledstorm: After some fruitless research for artwork that I could replace the right text box with, or any original bezel pictures for these two successors of leds2011, I went for a completely different approach: I split a promo picture that I found on capcom.fandom.com, giving Mad Gear and its US clone LED Storm a completely different, unique look.

I didn't make a pull request for it yet, to put this up here for discussion. What do you all think of it?

Ashpool

@Clyde said in Arcade overlays 4:3, 1600x1200:

After some fruitless research for artwork that I could replace the right text box with, or any original bezel pictures for these two successors of leds2011

madgear over at Mr.Do's, or from arcade artwork?

Edit: The linked Mr.Do's jpg is 800x800, but the led-storm.jpg within the corresponding madgear.zip is 4000x4000 (same as the bezel at arcade artwork).

Clyde

@Ashpool Thanks, but these are for LED Storm Rally 2011 (leds2011), like I described in the edit of my post above. As I mentioned yesterday in Jitsi, many artwork sites list this bezel wrongly for Mad Gear (madgear) or its clone LED Storm (ledstorm).

Of course, it might just be that this bezel actually was used for them, despite the wrong instructions for them on it, but I couldn't find any information about that either, so I rather won't just assume it. And even if so, I don't want to make a 4:3 bezel with incorrect text on it. 🧐

Soo … what are your thoughts about my alternative bezel? Or any other ideas what I could do with the right text panel in the original?

apefray

Hi Guys....

Absolute newbie to retropie here, and am in the middle of converting an Arcade1up cab to run retropie. I have replaced the original Arcade1up monitor with a Dell 2007fpb, and have retropie running on it.

This setup is working great for horizontal games, but I found the vertical games were lacking with the borders being shown, so did a search and came across these bezels which look like they will be ideal for filling in the blank borders. Great, I have downloaded the zip file and have all the files required, but, this is where i am getting lost:

The .cfg files in cfgs assume retroarch overlay folder is: /opt/retropie/emulators/retroarch/overlays/arcade-bezels/. If folder does not exist on your RetroPie, create it. If using a different folder, edit .cfg files accordingly.

Summarizing the steps:

SSH or FTP into Pi
Copy cfgs/romname.cfg into your configs/all/retroarch/config/MAME <version> (lr-mame) or configs/all/retroarch/config/FB Neo (lr-fbneo) folder
Copy PNG file and bezel-cfgs/romname.cfg into overlay folder. There is also a generic.png bezel for games without a dedicated one.

Ok, so I have created the folder: /opt/retropie/emulators/retroarch/overlays/arcade-bezels/

But the rest of the instructions are baffling me, bearing in mind this is a straight install of retropie im using with no mods or custom configs at all.

Firstly, it says to copy the contents of cfg/romname.cfg into your configs/all/retroarch/config/ MAME <version> (lr-mame) or configs/all/retroarch/config/FB Neo (lr-fbneo) folder, but these folders dont exist on my install. I guess I need to create these folders, but am a little confused as to where to create them. Would I be right in thinking /retropie-mount/roms/arcade, in this folder i have 3 other folders, Mame2003, Mame2003-plus & roms (yes, im using a usb drive for the roms hence the retropie-mount). I can see a cfg folder in both Mame2003 & Mame2003-plus folders, but again, they are empty folders, so they don't match the instructions?

I have another folder under roms named mame-libretro, but this folder only has roms in it?

Secondly, its the same with Copy PNG file and bezel-cfgs/romname.cfg into overlay folder. There is also a generic.png bezel for games without a dedicated one. Im guessing this is the folder I created earlier opt/retropie/emulators/retroarch/overlays/arcade-bezels/ but the instructions say to copy the PNG file and bezel-cfgs/romname.cfg into the overlay folder. Would that be the overlays folder or arcade-bezels folder?

As I say, i have retropie up and running, but am a complete newbie when it comes to custom configs on retropie.

Cheers

Ashpool

@apefray Right, The image of desired resolution and the bezel-cfg/*.cfg goes into /opt/retropie/configs/all/retroarch/overlays/arcade-bezels (or via samba shares simply /config/all/...).
But there are multiple places the config from [GIT-Repo]/cfgs could be placed. The GIT-Repo doc/naming scheme assumes it to be a core specific game override (see: retroarch docs "per game override").
It can either (named as is romname.cfg) be placed into .../configs/all/retroarch/config/[CORE NAME] (e.g. for FBNeo: "FinalBurn Neo") [-> Those directories aren't created by default, if unsure what the proper core name is - just start a game and from the libretro menu go into core options -> manage core options -> save game options, this will create a romname.opt file together/within the proper cores folder in above config path (you can delete the .opt file afterwards)], or it can be placed next to the rom inside the rom folder, but then the config-file has to be renamed to match the full romname including its file extension (e.g. for amidar.7z it has to be named amidar.7z.cfg, for zaxxon.zip it will be zaxxon.zip.cfg).