Old Computer Appreciation Thread
-
I only played the Practice session option for a few minutes and that worked fine. I will try the proper game/tournament option and report back.
Unfortunately, I have been unable to get the MAME emulator options or MESS game specific emulator selection options to work. I have even tried making them the default in the emulator.config file and still no success.
I created a User Disk folder in the Rom directory where I store all the different user disks and lr-mess seems to default to it when I use the GUI to add a floppy image. So adding the user disk image file is a fairly quick exercise.
-
@testudo said in Old Computer Appreciation Thread:
I only played the Practice session option for a few minutes and that worked fine. I will try the proper game/tournament option and report back.
Curious if it will works, on your side.
Unfortunately, I have been unable to get the MAME emulator options or MESS game specific emulator selection options to work. I have even tried making them the default in the emulator.config file and still no success.
I don't know what problem you have then.
I created a User Disk folder in the Rom directory where I store all the different user disks and lr-mess seems to default to it when I use the GUI to add a floppy image. So adding the user disk image file is a fairly quick exercise.
Nice solution.
-
-
Fantastic! I was going to post that I played 5 sets in <Exhibition> and it worked fine.
-
@Folly
Does the Acorn Archimedes emulation still work for you? I have updated RP a few times and recently went back to revisit my Archimedes game library, only to find I am unable to launch any games. I usually get the screen below (remember seeing this previously, but forget the fix) when using lr-mess. The RISC OS never boots.
-
Yes, it works.
You should check your /dev/shm/runcommand.log .
I used my latest mamedev-script 241.00 .
Installed "aa310 + booting Risc OS 310 + floppy" from the EXTRAS section .
Placed the these bioses in /home/pi/RetroPie/BIOS/mame :
aa310.7z
archimedes_keyboard.7zextracted the mame software archimedes.zip in /home/pi/RetroPie/roms/archimedes .
Loaded lemming.zip correctly with :
lr-mess-aa310-bios_310-flop
lr-run_mess-aa310-flop-autoframeskip
mame-aa310-bios_310-flop -
@Folly said in Old Computer Appreciation Thread:
the mame software archimedes.zip
Looks like my BIOS files are not working for some reason.
[libretro ERROR] 0296,041-01.rom NOT FOUND (tried in aa310) 0296,042-01.rom NOT FOUND (tried in aa310) 0296,043-01.rom NOT FOUND (tried in aa310) 0296,044-01.rom NOT FOUND (tried in aa310) cmos_riscos3.bin NOT FOUND (tried in aa310) acorn_0280,022-01_philips_8051ah-2.bin NOT FOUND (tried in archimedes_keyboard aa310)But, it appears those roms are in my aa310.zip and archimedes_keyboard.zip (I have .7Z versions in the BIOS folder as well).
More investigating to do...
-
You know, you can do it with my script in the "restricted browser".
You only have to insert the correct "website name".You can search, with google/duckduckgo, for the file in
mame-0.231-merged
Then you will know what to insert into the form.
Then you will see everything what is available.When selecting something from this romset, it will automatically be pushed to the BIOS/mame.
There is also an option for BIOS(es) not found.
After you tried a system in mame or lr-mess, just go to my script and select that (picture 2) and if it works correctly then it will show you what you are missing and have to get.
Edit :
Replace the xxx'es
axxxxxx.xxg -
@Folly
Thanks for pointing me in the right direction and alerting me to the browser feature.I am apparently not in the correct frame of mind to be thinking clearly, as the web addresses I enter for the merged set are being rejected. Might be because they are split into smaller compressed files due to hosting requirements. I will re-read your instructions after a good night's rest and try again tomorrow.
-
Ok, a good night's sleep did wonders. I figured out how to use the restricted browser. The script saw my currently installed BIOS as valid, so I deleted them and re-installed the two files via the script. Unfortunately, the situation remains unchanged and the pink screen was still there.
I'll keep investigating in my spare time.
-
@Folly
Solved the problem. For some reason regular lr-mess no longer worked and selecting the lr-run_mess aa4001 option did the trick. -
Good to hear that you got it working.
Did you use the latest lr-mess and my latest script for installation ?
What about mame, did it work ?
Is this the loader command that didn't work ?
lr-mess-aa310-bios_310-flop = "/opt/retropie/emulators/retroarch/bin/retroarch --config /opt/retropie/configs/archimedes/retroarch.cfg --appendconfig /opt/retropie/configs/archimedes/retroarch.cfg.add -S /home/pi/RetroPie/roms/archimedes -s /home/pi/RetroPie/roms/archimedes -v -L /opt/retropie/libretrocores/lr-mess/mess_libretro.so 'aa310 -bios 310 -rompath /home/pi/RetroPie/BIOS/mame;/home/pi/RetroPie/roms/archimedes/ -cfg_directory /opt/retropie/configs/archimedes/lr-mess -c -ui_active -flop %ROM%'"
(can you check inside your /opt/retropie/configs/archimedes/emulators.cfg) -
@Folly
Pretty sure used lr-mess .241 when re-installing Archimedes. I am not sure if it was using version .240 or .241 of your script though. The BIOS was definitely installed with v.241.01 of your script.I had initially used this loader command, but it stopped working:
lr-mess-aa310-bios_310-flop = "/opt/retropie/emulators/retroarch/bin/retroarch --config /opt/retropie/configs/archimedes/retroarch.cfg --appendconfig /opt/retropie/configs/archimedes/retroarch.cfg.add -S /home/testudo/RetroPie/roms/archimedes -s /home/testudo/RetroPie/roms/archimedes -v -L /opt/retropie/libretrocores/lr-mess/mess_libretro.so 'aa310 -bios 310 -rompath /home/pi/RetroPie/BIOS/mame;/home/testudo/RetroPie/roms/archimedes/ -cfg_directory /opt/retropie/configs/archimedes/lr-mess -c -ui_active -flop %ROM%'"From the start, I have really only had success using the lr-mess versions of the loader commands, regardless of the system being emulated. With few exceptions, the MAME options fail to work.
This is the loader command that is working successfully:
lr-run_mess-aa4401-bios_310-4Mb-flop-autoframeskip = "/home/testudo/RetroPie-Setup/scriptmodules/run_mess.sh /opt/retropie/emulators/retroarch/bin/retroarch /opt/retropie/libretrocores/lr-mess/mess_libretro.so /opt/retropie/configs/archimedes/retroarch.cfg \aa4401 /home/testudo/RetroPie/BIOS/mame\;/home/testudo/RetroPie/roms/archimedes -autoframeskip -cfg_directory /opt/retropie/configs/archimedes/lr-mess -ui_active -bios 310 -ram 4M -flop %ROM%" -
Tanks for letting me know what you did and that looks good.
Very strange that the plain mame and lr-mess loaders won't work properly.
lr-runmess uses the same lr-mess indirectly by making a .cmd file and then running that with lr-mess. After stopping the game that .cmd is removed again.
Can't point my finger on it on where it goes wrong.
-
Can you test a minimal mame command in the cli for me.
This way we will try to load "aa310" with "-bios 310" directly without commands that are generated by my script.
I would like to know if this works.
With this we eliminate everything that has to do with my script.So exit emulationstation with F4, then type :
/opt/retropie/emulators/mame/mame aa310 -bios 310You can speed up the typing by using the <tab> key to automatically add the directory names :
/o<tab>/r<tab>/e<tab>/ma<tab>/ma<tab> aa310 -bios 310The UI is off by default this way so you have to use the "scroll-lock key" to activate.
Then you can escape with the "esc key"Can you let me know if it boots into the 310 OS ?
-
@Folly said in Old Computer Appreciation Thread:
/opt/retropie/emulators/mame/mame aa310 -bios 310
No success.
testudo@testudo-HP-Pavilion-dv7-Notebook-PC:~$ /opt/retropie/emulators/mame/mame aa310 -bios 310 Error opening translation file English 0296,041-01.rom NOT FOUND (tried in aa310) 0296,042-01.rom NOT FOUND (tried in aa310) 0296,043-01.rom NOT FOUND (tried in aa310) 0296,044-01.rom NOT FOUND (tried in aa310) cmos_riscos3.bin NOT FOUND (tried in aa310) acorn_0280,022-01_philips_8051ah-2.bin NOT FOUND (tried in archimedes_keyboard aa310) Fatal error: Required files are missing, the machine cannot be run.aa310.7z and archimedes_keyboard.7z BIOS files are located in /Home/RetroPie/BIOS/mame.
-
Do you have this line in /opt/retropie/configs/mame/mame.ini ? :
rompath /home/pi/RetroPie/roms/mame;/home/pi/RetroPie/roms/arcade;/home/pi/RetroPie/BIOS/mame(and also in the linked directory : /home/pi/.mame/mame.ini ?)
/Home/RetroPie/BIOS/mame
EDIT !!! :
You mean :
/home/testudo/RetroPie/BIOS/mame -
@testudo said in Old Computer Appreciation Thread:
testudo@testudo
I see that you do not use "pi" as username but "testudo".
That might be the problem.
The rompath should be :
/home/testudo/RetroPie/BIOS/mame; etc.I found that the rompath in the plain lr-mess loader is incorrect :
-rompath /home/pi/RetroPie/BIOS/mame;/home/testudo/RetroPie/roms/archimedes/That is also an issue.
-
Do you have testudo in mame.ini ? or pi ?
I will look at my script and try to fix the problem.
-
I did 2 commits.
In the first one I converted all /home/pi to /home/$user.
(but I mistakenly used an older script)
In the second commit I pushed back the last update that I mistakenly erased.
https://github.com/FollyMaddy/RetroPie-Share/commit/bbf6608399c250745613995a1db4c5378cb72213
https://github.com/FollyMaddy/RetroPie-Share/commit/b166a085236357032632850a9c038f2259bb4805Get this new 0240.03 script and reinstall all the aa310 again.
That should fix the problem for my script at least.We still have to look into the mame.ini.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.