Guide: Advanced Controller Mappings

mediamogul

for some reason it will not see my mapping as a valid key press

Ah, OK. I think I know what's wrong. Take a look at the final part of section 3A of the guide if you haven't already. It tells how to set a udev rule so that RetroArch will see the xboxdrv vitualized keyboard as being a real keyboard.

ExarKunIv

@mediamogul

the funny thing is that i already had that, so when i looked at it again i saw my problem

you have this on your guide

SUBSYSTEM=="input", ATTRS{name}=="Microsoft X-Box 360 pad - Keyboard Emulation", GROUP="users", MODE="0666", ENV{ID_INPUT_KEYBOARD}="1"

i had to change it to this

SUBSYSTEM=="input", ATTRS{name}=="Microsoft X-Box 360 pad", GROUP="users", MODE="0666", ENV{ID_INPUT_KEYBOARD}="1"

i know that i dont have a custom name but i remember what the cat /proc/bus/input/devicespulled up when i ran it whit the script going.

so i think that did it, but i will have to do more testing tomorrow, but it is looking good now

and as always thanks for the help

mediamogul

@ExarKunIv said in Guide: Advanced Controller Mappings:

you have this on your guide... i had to change it to this

I'll test that with a few controllers. It may need to be changed in the guide. Thanks for pointing it out.

ExarKunIv

well i have done testing on my end and my config works, and so do the others even with the change for the 99-xboxdrv.rules

here is my config for 8BitDo to work with videopac/Odyssey2

if [ "$1" = "videopac" ]
then
sudo killall > /dev/null 2>&1 xboxdrv
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv > /dev/null 2>&1 \
    --evdev /dev/input/event0 \
    --silent \
	--detach-kernel-driver \
	--force-feedback \
	--mimic-xpad \
        --deadzone 15% \
	--evdev-no-grab \
	--dpad-as-button \
	--trigger-as-button \
	--evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_Z=x2,ABS_RZ=y2,ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y \
	--evdev-keymap KEY_#304=a,KEY_#305=b,KEY_#307=x,KEY_#308=y,KEY_#312=lt,KEY_#313=rt,KEY_#310=lb,KEY_#311=rb,KEY_#317=tl,KEY_#318=tr,KEY_#314=back,KEY_#315=start \
	--axismap -Y1=Y1,-Y2=Y2 \
        --ui-buttonmap a=KEY_UNKNOWN,b=KEY_UNKNOWN,start=KEY_UNKNOWN,back=KEY_UNKNOWN,x=KEY_UNKNOWN,y=KEY_UNKNOWN,lt=KEY_UNKNOWN,rt=KEY_UNKNOWN,lb=KEY_UNKNOWN,rb=KEY_UNKNOWN,tl=KEY_UNKNOWN,tr=KEY_UNKNOWN \
	--ui-axismap x2=KEY_1:KEY_2,Y2=KEY_3:KEY_4 \
&
fi

just remember to do part of section 3A of the guide as @mediamogul says

ExarKunIv

@mediamogul

quick question
how do i use this for ports, i mean what do i put in the name

if [ "$1" = "videopac" ]

example if i want to set a mapping for rise of the triad, do i use rott for that is the folder name, or does the word port need to be in there due to it being in the port folder?

hope this is clear

mediamogul

@ExarKunIv

$1 is the variable for the system/port name, so:

if [ "$1" = "rott" ]

should do the job.

ExarKunIv

@mediamogul

sweet
thanks again

ExarKunIv

so have been playing round with getting ESC mapped for Solarus. so that way i can exit it easyly.
my mapping works great

if [ "$1" = "zelda_roth_se,zsdx,zsxd" ]
then
sudo killall > /dev/null 2>&1 xboxdrv
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv > /dev/null 2>&1 \
    --evdev /dev/input/event1 \
    --silent \
	--detach-kernel-driver \
	--force-feedback \
	--mimic-xpad \
        --deadzone 15% \
	--evdev-no-grab \
	--dpad-as-button \
	--trigger-as-button \
	--evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_Z=x2,ABS_RZ=y2,ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y \
	--evdev-keymap KEY_#304=a,KEY_#305=b,KEY_#307=x,KEY_#308=y,KEY_#312=lt,KEY_#313=rt,KEY_#310=lb,KEY_#311=rb,KEY_#317=tl,KEY_#318=tr,KEY_#314=back,KEY_#315=start \
	--axismap -Y1=Y1,-Y2=Y2 \
    --ui-buttonmap a=KEY_UNKNOWN,b=KEY_UNKNOWN,start=KEY_UNKNOWN,back=KEY_UNKNOWN,x=KEY_UNKNOWN,y=KEY_UNKNOWN,lt=KEY_UNKNOWN,rt=KEY_UNKNOWN,lb=KEY_UNKNOWN,rb=KEY_UNKNOWN,tl=KEY_UNKNOWN,tr=KEY_ESC \
	--ui-axismap x2=void,Y2=void \
&
fi

but only if i put it in manually. if will not auto start.

im sure that i have something wrong with the port name

if [ "$1" = "zelda_roth_se,zsdx,zsxd" ]

i have tryed just useing Solarus but no go. any ideas?

mediamogul

@ExarKunIv

Try changing:

if [ "$1" = "zelda_roth_se,zsdx,zsxd" ]

to:

if [ "$2" = "solarus" ]

ExarKunIv

@mediamogul

thanks for getting back to me, but sadly nothing happens

i ran cat /proc/bus/input/devices and all it pulls up is my 8BitDo.

this is beginning to bug me

mediamogul

@ExarKunIv

It might be:

if [ "$1" = "solarus" ]

instead

ExarKunIv

@mediamogul

tired that too, still nothing

mediamogul

@ExarKunIv

Try putting the following at the top of your runcommand-onstart:

## Name of the emulator
echo $1 >> /dev/shm/runcommand.log

## Name of the software used for running the emulation
echo $2 >> /dev/shm/runcommand.log

## Name of the rom
echo $3 >> /dev/shm/runcommand.log

##Executed command line
echo $4 >> /dev/shm/runcommand.log

Then, after you launch solarus, look at your /dev/shm/runcommand.log file and list what's on the first four lines.

ExarKunIv

@mediamogul

zelda_roth_se
solarus

LD_LIBRARY_PATH=/opt/retropie/ports/solarus/lib /opt/retropie/ports/solarus/bin/solarus_run /opt/retropie/ports/solarus/share/solarus/zelda_roth_se/
/opt/retropie/configs/all/runcommand-onstart.sh: line 109: syntax error near unexpected token `&'
/opt/retropie/configs/all/runcommand-onstart.sh: line 109: `&'
Parameters: 
Executing: LD_LIBRARY_PATH=/opt/retropie/ports/solarus/lib /opt/retropie/ports/solarus/bin/solarus_run /opt/retropie/ports/solarus/share/solarus/zelda_roth_se/
Solarus 1.4.5
Opening quest '/opt/retropie/ports/solarus/share/solarus/zelda_roth_se/'
AL lib: (WW) alc_initconfig: Failed to initialize backend "pulse"
2D acceleration: yes

ask and you will receive

mediamogul

@ExarKunIv

Based on "solarus" being the second line,

if [ "$2" = "solarus" ]

should be doing the trick. After you launch solarus with that setting, check to see if xboxdrv is at least launching alongside it from another terminal.

ExarKunIv

@mediamogul

how do i check if xboxdrv is running.

and should i worry about /opt/retropie/configs/all/runcommand-onstart.sh: line 109: syntax error near unexpected token &'
/opt/retropie/configs/all/runcommand-onstart.sh: line 109: &'

mediamogul

@ExarKunIv

how do i check if xboxdrv is running.

You can run top via ssh.

and should i worry about... line 109

It might be the issue here. If nothing else, it's likely to be some other issue that needs looking at. Take a look at line 109 of the runcommand-onstart.sh closely to see if anything stands out.

ExarKunIv

@mediamogul

again thank you for the help.

i ran top and xboxdrv is running.
so i took a better look at the code. i did not see anything so i deleted

&
fi

and copyed it from a code above and it worked. i think i had a enter before

&
fi

would not of thought that would of done it, and

if [ "$2" = "solarus" ]

works great

mediamogul

@ExarKunIv

i think i had a enter before

Nice catch!

works great

Good to hear.

Chillimonster

Been linked to this thread whilst trying to sort Daphne / Dragonrise issues.

Looks like this could work.

Just need to get my head around how it all works and generate a config file (only 210 posts to read through!)

Thanks for the work that has gone into this.