Guide: Advanced Controller Mappings
-
i'm just trying to eliminate the keyboard usage all together
It can be done almost completely. The only time I need to use a keyboard is for system maintenance, Z-Machine emulation and certain computer games.
-
@mediamogul As per the "Advmame controller problem" thread which I started where I was unable to get Advmame to recognise Player 2's controls separate from Player 1, I've gone back to using lr-mame2003 for both Portrait and Landscape mode oriented roms.
For my 4 player arcade table (2 in portrait mode and 2 in landscape mode), xboxdrv allows me to map all 4 joysticks to the same keyboard controls, meaning that it doesn't matter whether I'm playing the game in portrait or landscape orientation, a joystick is going to work.
I've mapped Joysticks 1 and 3 to Player 1's keyboard controls and Joysticks 2 and 4 to Player 2's keyboard controls. I've tested this setup with Ms Pacman and it seems to work in both orientations.
Hopefully, this code helps someone else with an arcade table similar to mine.
#!/bin/sh ### Uncomment one or all of the following if you need to find some information about the emulator or roms ### Name of the emulator #echo $1 >> /dev/shm/runcommand.log ### Name of the software used for running the emulation #echo $2 >> /dev/shm/runcommand.log ### Name of the rom #echo $3 >> /dev/shm/runcommand.log ### Executed command line #echo $4 >> /dev/shm/runcommand.log ### Code begins ### Game/ROM full path rom="${3##*/}" ### Set variables for joysticks and emulators ### Basic Configurations - Standard controller mappings for the 4 Arcade (DragonRise) joysticks - map Arcade joysticks to XBox 360 Controller and then map to keyboard. ### Remove " > /dev/null 2>&1 " from first line to see information when xboxdrv starts ### First: Using the TAB menu in lr-mame2003 and other emulators, either make note of the default keyboard controls and map the code below accordingly or in TAB map Player 1's and Player 2's controls to the keyboard controls you want and then map the code below. ### Second: Remember to change the 99-xboxdrv file to the following: ### SUBSYSTEM=="input", ATTRS{name}=="Player_1", GROUP="users", MODE="0666", ENV{ID_INPUT_KEYBOARD}="1" ### SUBSYSTEM=="input", ATTRS{name}=="Player_2", GROUP="users", MODE="0666", ENV{ID_INPUT_KEYBOARD}="1" ### SUBSYSTEM=="input", ATTRS{name}=="Player_3", GROUP="users", MODE="0666", ENV{ID_INPUT_KEYBOARD}="1" ### SUBSYSTEM=="input", ATTRS{name}=="Player_4", GROUP="users", MODE="0666", ENV{ID_INPUT_KEYBOARD}="1" ### Player1_4Way and Player2_4Way map Joysticks 1 and 2 with four way restriction for use with lr-mame2003. Player1_4Way="sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \ --silent \ --detach-kernel-driver \ --deadzone=4000 \ --deadzone-trigger 15% \ --force-feedback \ --mimic-xpad \ --trigger-as-button \ --ui-buttonmap lb=void,rb=void,tl=void,tr=void,guide=void,lt=void,rt=void \ --evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.3:1.0-event-joystick \ --device-name "Player_1" \ --evdev-absmap ABS_X=y1,ABS_Y=x1 \ --four-way-restrictor \ --evdev-keymap BTN_TRIGGER=x,BTN_THUMB=y,BTN_THUMB2=a,BTN_PINKIE=b,BTN_BASE3=back,BTN_BASE6=start \ --ui-axismap X1=KEY_LEFT:KEY_RIGHT,Y1=KEY_UP:KEY_DOWN \ --ui-buttonmap a=KEY_LEFTCTRL,b=KEY_LEFTALT,x=KEY_SPACE,y=KEY_LEFTSHIFT,back=KEY_5+KEY_1,start=KEY_6+KEY_2,back+start=KEY_SPACE+KEY_ESC" Player2_4Way="sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \ --silent \ --detach-kernel-driver \ --deadzone=4000 \ --deadzone-trigger 15% \ --force-feedback \ --mimic-xpad \ --trigger-as-button \ --ui-buttonmap lb=void,rb=void,tl=void,tr=void,guide=void,lt=void,rt=void \ --evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.1:1.0-event-joystick \ --device-name "Player_2" \ --evdev-absmap ABS_X=y1,ABS_Y=x1 \ --four-way-restrictor \ --evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start \ --ui-axismap X1=KEY_D:KEY_G,Y1=KEY_R:KEY_F \ --ui-buttonmap a=KEY_A,b=KEY_S,x=KEY_Q,y=KEY_W,back=KEY_6+KEY_2,start=KEY_UNKNOWN,back+start=KEY_SPACE+KEY_ESC" ### Player3_4Way and Player4_4Way map Joysticks 3 and 4 with four way restriction for use with lr-mame2003. Player3_4Way="sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \ --silent \ --detach-kernel-driver \ --deadzone=4000 \ --deadzone-trigger 15% \ --force-feedback \ --mimic-xpad \ --trigger-as-button \ --ui-buttonmap lb=void,rb=void,tl=void,tr=void,guide=void,lt=void,rt=void \ --evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.2:1.0-event-joystick \ --device-name "Player_3" \ --evdev-absmap ABS_X=x1,ABS_Y=y1 \ --four-way-restrictor \ --evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start \ --ui-axismap X1=KEY_DOWN:KEY_UP,Y1=KEY_RIGHT:KEY_LEFT \ --ui-buttonmap a=KEY_LEFTCTRL,b=KEY_LEFTALT,x=KEY_SPACE,y=KEY_LEFTSHIFT,back=KEY_5+KEY_1,start=KEY_6+KEY_2,back+start=KEY_SPACE+KEY_ESC" Player4_4Way="sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \ --silent \ --detach-kernel-driver \ --deadzone=4000 \ --deadzone-trigger 15% \ --force-feedback \ --mimic-xpad \ --trigger-as-button \ --ui-buttonmap lb=void,rb=void,tl=void,tr=void,guide=void,lt=void,rt=void \ --evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.4:1.0-event-joystick \ --device-name "Player_4" \ --evdev-absmap ABS_X=x1,ABS_Y=y1 \ --four-way-restrictor \ --evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start \ --ui-axismap X1=KEY_F:KEY_R,Y1=KEY_G:KEY_D \ --ui-buttonmap a=KEY_A,b=KEY_S,x=KEY_Q,y=KEY_W,back=KEY_6+KEY_2,start=KEY_UNKNOWN,back+start=KEY_SPACE+KEY_ESC" ### Player1_8Way and Player2_8Way map Joysticks 1 and 2 with no restriction for use with lr-mame2003 Player1_8Way="sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \ --silent \ --detach-kernel-driver \ --deadzone=4000 \ --deadzone-trigger 15% \ --force-feedback \ --mimic-xpad \ --trigger-as-button \ --ui-buttonmap lb=void,rb=void,tl=void,tr=void,guide=void,lt=void,rt=void \ --evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.3:1.0-event-joystick \ --device-name "Player_1" \ --evdev-absmap ABS_X=y1,ABS_Y=x1 \ --evdev-keymap BTN_TRIGGER=x,BTN_THUMB=y,BTN_THUMB2=a,BTN_PINKIE=b,BTN_BASE3=back,BTN_BASE6=start \ --ui-axismap X1=KEY_LEFT:KEY_RIGHT,Y1=KEY_UP:KEY_DOWN \ --ui-buttonmap a=KEY_LEFTCTRL,b=KEY_LEFTALT,x=KEY_SPACE,y=KEY_LEFTSHIFT,back=KEY_5+KEY_1,start=KEY_6+KEY_2,back+start=KEY_SPACE+KEY_ESC" Player2_8Way="sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \ --silent \ --detach-kernel-driver \ --deadzone=4000 \ --deadzone-trigger 15% \ --force-feedback \ --mimic-xpad \ --trigger-as-button \ --ui-buttonmap lb=void,rb=void,tl=void,tr=void,guide=void,lt=void,rt=void \ --evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.1:1.0-event-joystick \ --device-name "Player_2" \ --evdev-absmap ABS_X=y1,ABS_Y=x1 \ --evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start \ --ui-axismap X1=KEY_D:KEY_G,Y1=KEY_R:KEY_F \ --ui-buttonmap a=KEY_A,b=KEY_S,x=KEY_Q,y=KEY_W,back=KEY_6+KEY_2,start=KEY_UNKNOWN,back+start=KEY_SPACE+KEY_ESC" ### Player3_8Way and Player4_8Way map Joysticks 3 and 4 with no restriction for use with lr-mame2003 Player3_8Way="sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \ --silent \ --detach-kernel-driver \ --deadzone=4000 \ --deadzone-trigger 15% \ --force-feedback \ --mimic-xpad \ --trigger-as-button \ --ui-buttonmap lb=void,rb=void,tl=void,tr=void,guide=void,lt=void,rt=void \ --evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.2:1.0-event-joystick \ --device-name "Player_3" \ --evdev-absmap ABS_X=x1,ABS_Y=y1 \ --evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start \ --ui-axismap X1=KEY_DOWN:KEY_UP,Y1=KEY_RIGHT:KEY_LEFT \ --ui-buttonmap a=KEY_LEFTCTRL,b=KEY_LEFTALT,x=KEY_SPACE,y=KEY_LEFTSHIFT,back=KEY_5+KEY_1,start=KEY_6+KEY_2,back+start=KEY_SPACE+KEY_ESC" Player4_8Way="sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \ --silent \ --detach-kernel-driver \ --deadzone=4000 \ --deadzone-trigger 15% \ --force-feedback \ --mimic-xpad \ --trigger-as-button \ --ui-buttonmap lb=void,rb=void,tl=void,tr=void,guide=void,lt=void,rt=void \ --evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.4:1.0-event-joystick \ --device-name "Player_4" \ --evdev-absmap ABS_X=x1,ABS_Y=y1 \ --evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start \ --ui-axismap X1=KEY_F:KEY_R,Y1=KEY_G:KEY_D \ --ui-buttonmap a=KEY_A,b=KEY_S,x=KEY_Q,y=KEY_W,back=KEY_6+KEY_2,start=KEY_UNKNOWN,back+start=KEY_SPACE+KEY_ESC" ### Player1_Amiga and Player2_Amiga are for the UAE4ARM emulator and fixes the axes for Players 1 and 2 Player1_Amiga="sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \ --silent \ --detach-kernel-driver \ --deadzone=4000 \ --deadzone-trigger 15% \ --force-feedback \ --mimic-xpad \ --trigger-as-button \ --ui-buttonmap lb=void,rb=void,tl=void,tr=void,guide=void,lt=void,rt=void \ --evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.3:1.0-event-joystick \ --device-name "Amiga_Joystick_Player_1_xboxdrv" \ --evdev-absmap ABS_X=y1,ABS_Y=x1 \ --evdev-keymap BTN_TRIGGER=x,BTN_THUMB=y,BTN_THUMB2=a,BTN_PINKIE=b,BTN_BASE3=back,BTN_BASE6=start" Player2_Amiga="sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \ --silent \ --detach-kernel-driver \ --deadzone=4000 \ --deadzone-trigger 15% \ --force-feedback \ --mimic-xpad \ --trigger-as-button \ --ui-buttonmap lb=void,rb=void,tl=void,tr=void,guide=void,lt=void,rt=void \ --evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.1:1.0-event-joystick \ --device-name "Amiga_Joystick_Player_2_xboxdrv" \ --evdev-absmap ABS_X=y1,ABS_Y=x1 \ --evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start" ### Arcade Games that use 4 way restricted joysticks - 208 of 208 identified games RestrictedArcadeGames=""alibaba.zip"|"amidar.zip"|"armwrest.zip"|"astinvad.zip"|"atetris.zip"|"anteater.zip"|"armorcar.zip"|"astrob.zip"|"astrof.zip"|"bagman.zip"|"ballbomb.zip"|"barrier.zip"|"blkhole.zip"|"blasto.zip"|"blockade.zip"|"btime.zip"|"carjmbre.zip"|"carnival.zip"|"cavelon.zip"|"chameleo.zip"|"checkman.zip"|"chinhero.zip"|"circusc.zip"|"ckong.zip"|"commando.zip"|"congo.zip"|"dazzler.zip"|"devilfsh.zip"|"digdug.zip"|"digdug2.zip"|"digger.zip"|"disco.zip"|"dkong.zip"|"dkong3.zip"|"dkongjr.zip"|"docastle.zip"|"dommy.zip"|"dorodon.zip"|"frogger.zip"|"galaga.zip"|"galaxian.zip"|"galxwars.zip"|"guzzler.zip"|"invrvnge.zip"|"invinco.zip"|"jjack.zip"|"joust2.zip"|"jrpacman.zip"|"jumpcoas.zip"|"jungler.zip"|"kchamp.zip"|"kicker.zip"|"kingball.zip"|"ladybug.zip"|"lasso.zip"|"levers.zip"|"lnc.zip"|"locomotn.zip"|"logger.zip"|"lrescue.zip"|"lupin3.zip"|"mappy.zip"|"marvins.zip"|"mikie.zip"|"mmonkey.zip"|"monsterb.zip"|"moonal2.zip"|"moonqsr.zip"|"mrdo.zip"|"mrflea.zip"|"mrjong.zip"|"mrtnt.zip"|"mspacman.zip"|"mystston.zip"|"naughtyb.zip"|"netwars.zip"|"olibochu.zip"|"ozmawars.zip"|"pacnpal.zip"|"pacplus.zip"|"pengo.zip"|"perestro.zip"|"pickin.zip"|"pignewt.zip"|"pisces.zip"|"pleiads.zip"|"pooyan.zip"|"popflame.zip"|"puckman.zip"|"pacman.zip"|"pulsar.zip"|"qbert.zip"|"qbertqub.zip"|"qix.zip"|"radarscp.zip"|"retofinv.zip"|"rocnrope.zip"|"route16.zip"|"samurai.zip"|"tsamurai.zip"|"scregg.zip"|"sindbadm.zip"|"solarfox.zip"|"sonofphx.zip"|"invadpt2.zip"|"panic.zip"|"shollow.zip"|"spclaser.zip"|"sqbert.zip"|"streakng.zip"|"sbagman.zip"|"superpac.zip"|"superqix.zip"|"ssi.zip"|"swat.zip"|"tactcian.zip"|"tankbatt.zip"|"taxidrvr.zip"|"elecyoyo.zip"|"theend.zip"|"timelimt.zip"|"tomahawk.zip"|"todruaga.zip"|"tranqgun.zip"|"triplep.zip"|"tutankhm.zip"|"vanvan.zip"|"volfied.zip"|"vsgongf.zip"|"wiping.zip"|"warpwarp.zip"|"zigzag.zip"|"zzyzzyxx.zip"|"alphaho.zip"|"pacnchmp.zip"|"comotion.zip"|"copsnrob.zip"|"cosmicg.zip"|"cosmos.zip"|"crash.zip"|"crush.zip"|"redufo.zip"|"diamond.zip"|"dorunrun.zip"|"dominos.zip"|"drmicro.zip"|"drgnbstr.zip"|"dremshpr.zip"|"elvactr.zip"|"eyes.zip"|"firetrap.zip"|"40love.zip"|"galpanic.zip"|"gundealr.zip"|"hardhat.zip"|"headon.zip"|"headon2.zip"|"heiankyo.zip"|"hexa.zip"|"hustle.zip"|"intrepid.zip"|"ironhors.zip"|"karianx.zip"|"kungfum.zip"|"lvgirl94.zip"|"logicpro.zip"|"logicpr2.zip"|"msjiken.zip"|"kikcubic.zip"|"mineswpr.zip"|"mtrap.zip"|"dowild.zip"|"mrgoemon.zip"|"natodef.zip"|"rallyx.zip"|"nrallyx.zip"|"pepper2.zip"|"pettanp.zip"|"popeye.zip"|"punchout.zip"|"raiders5.zip"|"rampage.zip"|"reikaids.zip"|"robby.zip"|"rthunder.zip"|"sidetrac.zip"|"schaser.zip"|"spaceinv.zip"|"spacezap.zip"|"spectar.zip"|"springer.zip"|"stratvox.zip"|"sia2650.zip"|"spnchout.zip"|"tapper.zip"|"rbtapper.zip"|"targ.zip"|"telmahjn.zip"|"theglob.zip"|"thief.zip"|"timber.zip"|"toypop.zip"|"wwjgtin.zip"|"wndrmomo.zip"|"yamyam.zip"|"zerozone.zip"|"zookeep.zip"|"pairs.zip"|"higemaru.zip"|"elecyoy2.zip"|"arkangc.zip"|"arkanoid.zip"|"arkatayt.zip"|"arkatour.zip"|"arkbl2.zip"|"arkbl3.zip"|"arkbloc2.zip"|"arkblock.zip"|"arknid2j.zip"|"arknid2u.zip"|"arknoid2.zip"|"arknoidj.zip"|"arknoidu.zip"|"arknoiuo.zip"|"arkretrn.zip"|"tempest.zip"|"tempest1.zip"|"tempest2.zip"|"tempest3.zip"|"temptube.zip"" ### Kill xboxdrv xboxkill="sudo killall xboxdrv" ### Execute the driver with the configuration you need ### $1 is the name of the system emulation (eg mame-libretro), not the name of the emulator (eg not lr-mame2003), nor the name of the folder (eg not "arcade", not "mame-libretro", not "arcade-vertical" ### $1 - The system (eg: atari2600, nes, snes, megadrive, fba, etc). ### $2 - The emulator (eg: lr-stella, lr-fceumm, lr-picodrive, pifba, etc). ### $3 - The full path to the rom file. ### $4 - The full command line used to launch the emulator. ### This information can be obtained from /dev/shm/runcommand.info case $2 in lr-mame2003) case $rom in $RestrictedArcadeGames) # Configuration used only for these ROMs $xboxkill joycommand="$Player1_4Way & $Player2_4Way & $Player3_4Way & $Player4_4Way &" eval $joycommand ;; *) # Configuration for every other ROM in respect of this emulator $xboxkill joycommand="$Player1_8Way & $Player2_8Way & $Player3_8Way & $Player4_8Way &" eval $joycommand ;; esac ;; uae4arm) $xboxkill joycommand="$Player1_Amiga & $Player2_Amiga &" eval $joycommand ;; esac ### lr-fbalpha) ### case $rom in ### $RestrictedArcadeGames) # Configuration used only for these ROMs ### $xboxkill ### joycommand="$Player1_4Way & $Player2_4Way & $Player3_4Way & $Player4_4Way &" ### eval $joycommand ### ;; ### *) # Configuration for every other ROM in respect of this emulator ### $xboxkill ### joycommand="$Player1_8Way & $Player2_8Way & $Player3_8Way & $Player4_8Way &" ### eval $joycommand ### ;; ### esac ### ;; ### advmame-1.4) ### case $rom in ### $RestrictedArcadeGames) # Configuration used only for these ROMs ### $xboxkill ### joycommand="$Player1_4Way & $Player2_4Way & $Player3_4Way & $Player4_4Way &" ### eval $joycommand ### ;; ### *) # Configuration for every other ROM in respect of this emulator ### $xboxkill ### joycommand="$Player1_8Way & $Player2_8Way & $Player3_8Way & $Player4_8Way &" ### eval $joycommand ### ;; ### esac ### ;; -
@mediamogul any idea why the following is not accepting my dpad as buttons .. the dpad spits out nothing at all when I run evtest ? Also ... i'm not sure wing commander is seeing this remap at all. I should be configuring the game as keyboard not joystick right ?
#!/bin/bash sudo killall >/dev/null xboxdrv sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \ --evdev /dev/input/event3 \ --detach-kernel-driver \ --deadzone-trigger 15% \ --deadzone 4000 \ --device-name "donotroller" \ --calibration x1=-32767:0:32767,y1=-32767:0:32767,x2=-32767:0:32767,y2=-32767:0:32767 \ --trigger-as-button \ --dpad-as-button \ --evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_Z=x2,ABS_RZ=y2,ABS_RX=lt,ABS_RY=rt \ --evdev-keymap BTN_EAST=a,BTN_C=b,BTN_SOUTH=x,BTN_NORTH=y,BTN_WEST=lb,BTN_Z=rb,BTN_START=tl,BTN_SELECT=tr,BTN_THUMBL=guide,BTN_TL2=back,BTN_TR2=start \ --axismap -Y1=Y1,-Y2=Y2 \ --ui-axismap x1=KEY_LEFT:KEY_RIGHT,y1=KEY_UP:KEY_DOWN,x2=KEY_INSERT:KEY_DELETE,y2=KEY_EQUAL:KEY_MINUS \ --ui-buttonmap tl=KEY_RIGHTSHIFT,dd=KEY_M,du=KEY_G,dl=KEY_F,dr=KEY_B,lt=KEY_ENTER,rt=KEY_SPACE,a=KEY_L,b=KEY_E,x=KEY_X,y=KEY_Y,lb=KEY_T,rb=KEY_R,start=KEY_A,back=KEY_GRAVE \ -- \ /opt/retropie/emulators/dosbox/bin/dosbox -conf "/home/pi/RetroPie/roms/pc/wc/wc_3.conf" -
the dpad spits out nothing at all when I run evtest
I've never come across that. If it's not seen by evtest at all, then there might be no way to map it in xboxdrv. I revised your example above to include a common entry for
ABS_HAT0XandABS_HAT0Ythat might do the job. I also removed the last line, as it doesn't need to be there.#!/bin/bash sudo killall >/dev/null xboxdrv sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \ --evdev /dev/input/event3 \ --detach-kernel-driver \ --deadzone-trigger 15% \ --deadzone 4000 \ --device-name "donotroller" \ --calibration x1=-32767:0:32767,y1=-32767:0:32767,x2=-32767:0:32767,y2=-32767:0:32767 \ --trigger-as-button \ --dpad-as-button \ --evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_Z=x2,ABS_RZ=y2,ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y,ABS_RX=lt,ABS_RY=rt \ --evdev-keymap BTN_EAST=a,BTN_C=b,BTN_SOUTH=x,BTN_NORTH=y,BTN_WEST=lb,BTN_Z=rb,BTN_START=tl,BTN_SELECT=tr,BTN_THUMBL=guide,BTN_TL2=back,BTN_TR2=start \ --axismap -Y1=Y1,-Y2=Y2 \ --ui-axismap x1=KEY_LEFT:KEY_RIGHT,y1=KEY_UP:KEY_DOWN,x2=KEY_INSERT:KEY_DELETE,y2=KEY_EQUAL:KEY_MINUS \ --ui-buttonmap tl=KEY_RIGHTSHIFT,dd=KEY_M,du=KEY_G,dl=KEY_F,dr=KEY_B,lt=KEY_ENTER,rt=KEY_SPACE,a=KEY_L,b=KEY_E,x=KEY_X,y=KEY_Y,lb=KEY_T,rb=KEY_R,start=KEY_A,back=KEY_GRAVE \ & -
@mediamogul thanks .. ill give that a try. One question about ,ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y.
I dont see dpad_x or dpad_y in the ui-buttonmap or ui-axismap. I thought (probably incorrectly) that the evdev lines were like definitions and the ui- lines were assignments. Is this the wrong way to think about this ?
Thanks
-
I dont see dpad_x or dpad_y in the ui-buttonmap or ui-axismap.
dpad_xanddpad_yare normally mapped in --ui-axismap. If the DPad of the original controller is digital, or--dpad-as-buttonis added, then they are mapped withdu,dd,dlanddrin--ui-buttonmap. -
@mediamogul Thanks for all the advice ... just so you know im not crazy ... im trying to configure this ... =) Its SO helpful having someone like you willing to give advice.
# DEFINITIONS -----------------------------------------------------------| XBOXDRV ASSIGNMENTS ----------------- # | # F L I G H T | # | # 01. Pitch and Yaw : arrow U, arrow D, arrow L, arrow R | (See Mouse Ctrl) # 02. Pitch and Yaw Left : Numpad 7,1 | (See Mouse Ctrl) # 03. Pitch and Yaw Right : Numpad 9,3 | (See Mouse Ctrl) # 04. Roll Left, right : Ins, Del | (See Mouse Ctrl) # 05. Double Yaw, Pitch, Roll Rates: Shift + Key | (See Mouse Ctrl) # 06. Engage Autoslide : Caps Lock(Hold) | # 07. Autoslide Toggle : / | # 08. Increase Throttle : += | (See Mouse Ctrl) # 09. Decrease Throttle : -_ | (See Mouse Ctrl) # 10. Zero Throttle : Backspace | # 11. Max Throttle : \ | # 12. Match Target Speed : Y | # 13. Afterburn : TAB | (See Mouse Ctrl) # 14. Afterburn Toggle : ~ | (See Mouse Ctrl) # 15. Autopilot : A | # 16. Jump (Excalibur Only) : J | # 17. Pause : Alt-P | # 18. Eject : Ctrl-E | # 19. Calibrate Stick : Alt-C | #------------------------------------------------------------------------| # | # C O M B A T | # | # 01. Select Next Target : T | y # 02. Select Next Turret on Current: R | a # 03. Lock Target (Toggle) : L | x # 04. Smart Targeting : CTRL-S | b # 05. Switch Guns : G | d_pad_y - # 06. Select Full Guns : F | d_pad_y + # 07. Auto-Tracking : CTRL-A | tl # 08. Configure Missile Array : M | # 09. Change Missile Type : ] | d_pad_x - # 10. Select Missile (toggle) : [ | d_pad_x + # 11. Select All Missiles (Salvo) : B | tr # 12. Fire Guns : SPACEBAR | rt # 13. Fire Missiles : ENTER | lt # 14. Drop Decoy : E | back #------------------------------------------------------------------------| # | # N A V I G A T I O N M A P | # | # 01. Display Map : N | # 02. Change Viewpoint : U Arrow, D Arrow, L Arrow, R Arrow | # 03. Zoom In/Out : [ , ] | # 04. Center View : C | # 05. Cycle through Targets : T | # 06. Starfield (toggle) : S | # 07. Grid (toggle) : G | # 08. Background (Toggle) : B | #------------------------------------------------------------------------| # | # V I D E O D I S P L A Y U N I T S | # | # 01. Cycle Through Displays : 0 | # 02. Shields VDU : S | # 03. Communications VDU : C | # 04. Damage VDU (toggle text/icon): D | # 05. Damage Repair : ] | # 06. Weapon VDU (w cockpit active): W | # 07. Power VDU/ Change System : P | # 08. Increase Current System : ] | # 09. Decrease Current System : [ | # 10. Set Current Sys To 100% : SHIFT - ] | # 11. Reset All Systemsto 25% : SHIFT - [ | # 12. Lock Current Sys (toggle) : CTRL - ] | # | #------------------------------------------------------------------------| # | # C A M E R A V I E W S | # | # 01. Front View : Invis Cockpit : F1 | # 02. Left, Right, Rear Turret View : F2, F3, F4 | # 03. Rear Turret in left VDU : Ctrl-F4 | # 04. Chase Cam : F5 | # 05. Object Cam : F6 | # 06. Missile Cam : F8 | # 07. Victim Cam : F9 | # 08. Track Cam : F10 | # 09. Disable Flight Ctrl in Cam : Ctrl-L | # 10. Zoom In, Out : [ , ] | # : | #------------------------------------------------------------------------| # | # M O U S E C O M M A N D S | # | # 01. Flight Cursor Control : Move Mouse | x1, y1 # 02. Select Hotspot : Left Click | lb # 03. Fire Active Gun : Left Click | lb # 04. Fire Active Missile : Both Click | rb # 05. Increase/Decrease Throttle : Up/Dwn + Right Click | x2, y2 # 06. Roll Left, Right : L/R + Right Click | # 07. Afterburn : Double Right Click and Hold | start #------------------------------------------------------------------------| # | # J O Y S T I C K C O M M A N D S | # | # 01. Flight Control : Move Joystick | # 02. Fire Active Gun : Trigger | # 03. Fire Active Missile : Trigger + B2 | # 04. Rotate Camera : B2 + Move Joystick | # 05. Increase/Decrease Throttle : Up/Down B2 | # 06. Roll Left/Right : L/R B2 | # 07. Afterburn : B2 Double Click | # | #------------------------------------------------------------------------| # | # O N T H E C A R R I E R | # | # 01. Activate Person/Obj : Move Cursor over | (See Mouse Ctrl) # 02. Use Objects : Click | (See Mouse Ctrl) # 03. Cancel Skip Scene : Esc | guide # 04. Cycle Hotspots : Tab, Shift Tab, Right Mouse | (See Mouse Ctrl) # 05. Talk : Click on Character | (See Mouse Ctrl) # 06. Use : Click Terminal or Door | (See Mouse Ctrl) # 07. Select Reply : Move Device Up/Dwn - Click | d_pad_y # 08. Option Screen : Click Main Terminal | (See Mouse Ctrl) # | #------------------------------------------------------------------------| # | # G A M E I N T E R F A C E | # | # 01. Exit Game : Alt-X | # 02. VGA : Alt-1 | # 03. VGA (triple buffer) : Alt-2 | # 04. SVGA : Alt-3 | # 05. SVGA (triple buffer) : Alt-4 | # 06. Calibrate Joystick : Alt-J | # 07. Music (toggle) : Alt-M | # 08. Sound (toggle: on carrier) : Ctrl-M | # 09. Scene transition (Toggle) : Alt-K | # 09. Change Music Vol : Alt Up/Dwn | # 10. Change Sound Vol : Ctrl Up/Dwn | # 11. Change Gamma Correction : Ctrl Left/Right | # | #------------------------------------------------------------------------|If anyone needs the PS4 controller map ... here is the one i made ...
PS4 Controller MapI am considering abandoning the ps4 controller idea for this and trying to configure this ...
-
@dunnieboy said in Guide: Advanced Controller Mappings:
I am considering abandoning the ps4 controller idea for this and trying to configure this ...
I have on of those lying around here somewhere. Let us know how it works out.
-
Ok So this is mostly working now ... just have to tweak some stuff -- running out of slots in the ps4 controller so I might transition to that thing up above.
Thanks SO much media mogul. One last question ... again ... how do I access the right stick i'd love to use it instead of the dpad for missile selections and use the dpad just for communication(KEY-C), up-arrow, down-arrow and select.
Here is the config for anyone that is trying to do this -
#!/bin/bash sudo killall >/dev/null xboxdrv sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \ --evdev=/dev/input/by-id/usb-Sony_Interactive_Entertainment_Wireless_Controller-if03-event-joystick\ --detach-kernel-driver \ --deadzone-trigger 15% \ --deadzone 4000 \ --device-name "donotroller" \ --calibration x1=-32767:0:32767,y1=-32767:0:32767,x2=-32767:0:32767,y2=-32767:0:32767 \ --trigger-as-button \ --dpad-as-button \ --evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_Z=x2,ABS_RZ=y2,ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y,ABS_RX=lt,ABS_RY=rt \ --evdev-keymap BTN_EAST=a,BTN_C=b,BTN_SOUTH=x,BTN_NORTH=y,BTN_WEST=lb,BTN_Z=rb,BTN_START=tl,BTN_SELECT=tr,BTN_THUMBL=guide,BTN_TL2=back,BTN_TR2=start \ --axismap -Y1=Y1,-Y2=Y2 \ --ui-axismap x1=REL_X:10,y1=REL_Y:10 \ --ui-buttonmap a=BTN_LEFT,b=BTN_RIGHT `# mouse buttons`\ --ui-buttonmap lb=KEY_KPPLUS,rb=KEY_KPMINUS `# BUMPERS - throttle`\ --ui-buttonmap lt=KEY_ENTER,rt=KEY_SPACE `# TRIGGERS - fire missiles, fire guns`\ --ui-buttonmap tl=KEY_F,tr=KEY_B `# STICK CLICKS - full guns, full_missiles`\ --ui-buttonmap x=KEY_T,guide=KEY_L,y=KEY_LEFTCTRL+KEY_S `# TARGETING - Next Target, Lock, Smart Target`\ --ui-buttonmap start=KEY_A,back=KEY_E `# Auto Pilot, Drop Decoy`\ --ui-buttonmap dd=KEY_G,du=KEY_M,dl=KEY_RIGHTBRACE,dr=KEY_LEFTBRACE `# DPAD GUN CTRL - Switch Guns, Configure Missiles, Change Missile Type, Select Missiles`\ --ui-buttonmap back+start=KEY_ESC `# SKIP SCENE` \ -- \ /opt/retropie/emulators/dosbox/bin/dosbox -conf "/home/pi/RetroPie/roms/pc/wc/wc_3.conf" -
how do I access the right stick i'd love to use it instead of the dpad
Using the keys currently assigned to your DPad, the right stick would be look like:
--ui-axismap x2=KEY_RIGHTBRACE:KEY_LEFTBRACE,y2=KEY_M:KEY_G -
@mediamogul Everything is working great ... I have all my wing commander games workign great with the PS4 controller.
Here is another one for you ... I am trying to use named cycle references on the right stick.
--ui-axismap x2=cycle-key-named:views:KEY_F1:KEY_F2:KEY_F3:KEY_F4,:cycle-key-ref:views,y2=cycle-key-named:cams:KEY_F7:KEY_F8:KEY:F9,:cycle-key-ref:cams `# RIGHT STICK L/R = VIEWS, U/D = CAMS`\Any chance you know what I am doing wrong ... its a little tricky because the documentation says to use a comma to seperate pos/neg direction and then uses a button identifier.
Thanks
-
I believe the cycle functions can only be used with
--ui-buttonmap. The two ends of an axis are separated by a colon and the keys to be cycled through are as well. If I had to guess, that would be causing a conflict. -
@mediamogul that makes sense. Another question ... is there a way to have a bash script read a file for a joystick name ?
I am putting all my xboxdrv stuff in each games .sh file. I'd love to use a variable that reads a .txt file for the controller id name.
That way instead of :
--evdev=/dev/input/by-id/usb-Sony_Interactive_Entertainment_Wireless_Controller-if03-event-joystick\i could use something like
--evdev=/dev/input/by-id/%MY_VAR%\and all the .sh files would read that file.
Thanks !
-
I suppose you could put the name as the first line of a text file and reference it as
$jsnamewith something like:jsname=`sed '1q;d' /path/to/text/file.txt`However, using that method, you'd still have to have that line in your script, so it's not any easier than just including the name to begin with. I really haven't explored this sort of thing before, so there's probably quite a few better ways and definitely more knowledgeable people to ask.
-
@mediamogul said in Guide: Advanced Controller Mappings:
`sed '1q;d'
Ok ... I got it working.
This file is in /roms/pc/stick_id
#!/bin/bash STICKID=usb-Sony_Interactive_Entertainment_Wireless_Controller-if03-event-joystickHere I am reading that variable and all of my .sh game files access that config file for the joystick id. Now I only need to change the id name in one place.
#!/bin/bash source ~/RetroPie/roms/pc/stick_id/stick_id.sh sudo killall >/dev/null xboxdrv sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \ --evdev /dev/input/by-id/$STICKID \ --silent \ --detach-kernel-driver \ --force-feedback \ --deadzone-trigger 15% \ --deadzone 4000 \ --device-name "donotroller" \ --calibration x1=-32767:0:32767,y1=-32767:0:32767,x2=-32767:0:32767,y2=-32767:0:32767 \ --trigger-as-button \ --evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_Z=x2,ABS_RZ=y2,ABS_RX=lt,ABS_RY=rt,ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y \ --evdev-keymap BTN_EAST=a,BTN_C=b,BTN_SOUTH=x,BTN_NORTH=y,BTN_WEST=lb,BTN_Z=rb,BTN_START=tl,BTN_SELECT=tr,BTN_THUMBL=guide,BTN_TL2=back,BTN_TR2=start \ --axismap -Y1=Y1,-Y2=Y2 \ --ui-axismap x1=REL_X:10,y1=REL_Y:10 \ --ui-buttonmap lb=BTN_LEFT,rb=BTN_RIGHT \ --ui-buttonmap guide=void,x=void,y=void,a=void,b=void,tl=void,tr=void,lt=void,rt=void,back=void \ --ui-axismap x2=void \ -- \ -
so i got time to see what other codes come up when i start up stragus
here is my mouse mapping for my 8bit do and the left button press
Event: time 1491315704.363115, type 1 (EV_KEY), code 272 (BTN_LEFT), value 1 Event: time 1491315704.363115, -------------- EV_SYN ------------ Event: time 1491315704.470595, type 1 (EV_KEY), code 272 (BTN_LEFT), value 0 Event: time 1491315704.470595, -------------- EV_SYN ------------here is the code for my Rii (it does the same thing where is works kinda)
Event: time 1491316054.713802, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001 Event: time 1491316054.713802, type 1 (EV_KEY), code 272 (BTN_LEFT), value 0 Event: time 1491316054.713802, -------------- EV_SYN ------------and here is the real mouse that works fine
Event: time 1490821100.299279, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001 Event: time 1490821100.299279, type 1 (EV_KEY), code 272 (BTN_LEFT), value 0 Event: time 1490821100.299279, -------------- EV_SYN ------------i have no clue on this. i think this might be one that just cant be used with a joypad
RPi3B+ / 200GB/ RetroPie v4.5.14, RPi4 Model B 4gb / 256gb / RetroPie 4.8.2
Maintainer of RetroPie-Extra .
Here is a discussion Pi5 testing page -
When you're using the mouse-mapped controller, is your real mouse still connected? It could be that it's pulling focus in some way.
-
i did think of that, so all my testing is one at a time with only that device plugged in.
RPi3B+ / 200GB/ RetroPie v4.5.14, RPi4 Model B 4gb / 256gb / RetroPie 4.8.2
Maintainer of RetroPie-Extra .
Here is a discussion Pi5 testing page -
The only thing left I can think of is that the software may not be seeing the virtual mouse as being a real mouse in a similar way that RetroArch won't see the virtual keyboard without a udev rule. I would try searching for a similar rule that can be applied to the virtual mouse and see if that might make a difference.
-
ok i'll poke around and see if i can find anything.
EDIT
found this, just will need more time to get a handle on it, way above my pay gradehttp://www.embeddedlinux.org.cn/EssentialLinuxDeviceDrivers/final/ch07lev1sec1.html
http://stackoverflow.com/questions/16482260/using-linux-virtual-mouse-driver
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.