Setting up 2nd arcade control messes up first one

Ohris

@mitu Btw it is 1 cable per joystick and they connect to their own board that I attached to the backside of the controller board. As do the buttons. All the buttons and other cables are connected the same on both boards (to the same connections that is).

Ohris

@mitu This is the problem I seem to have... the joysticks are build the wrong way? And I cannot fit to install the other one sideways so that the cable would be on the same side... this seem to be the reason why the other controller is like up is right etc.

Is there any software solution to my problem so I could fix the controls for the second controller? separate configurations for the joysticks?

See image.

mitu

@Ohris I'm not versed in how joystick should look - are these the ones that come with the cabinet or you got them separately ? Maybe someone with more experience with these controls' wiring can give you a hint.

Ohris

@mitu I bought these separately from amazon. the actualy unit on the metal plate is attached to a different direction to the other as you can see... so "up" is not up on the other one... :'(

Now im just thinking of if there is a way to configure the other player separately?

I can configure the 2nd player from retropie when I start the game and go to the menu... But that does not even save the configs when I exit the game and I have to do it every time. I can now configure it so that for example 2 player "Up" is actually Right on the joystick. That works but does not save unfortunately and its very tedious to do it every time and for every game.

mitu

@Ohris The core input remapping can be saved per-system - see here - so you can configure and save the mapping between gaming sessions.

EDIT: on the other hand, you can probably edit the gamepad's auto-configuration file (from /opt/retropie/configs/all/retroarch-joypads/) and add the stanzas for

input_player1_l_x_plus =
input_player1_l_x_minus =
input_player1_l_y_plus =
input_player1_l_y_minus =
input_player1_r_x_plus =
input_player1_r_x_minus =
input_player1_r_y_plus =
input_player1_r_y_minus =

input_player2_l_x_plus =
input_player2_l_x_minus =
input_player2_l_y_plus =
input_player2_l_y_minus =
input_player2_r_x_plus =
input_player2_r_x_minus =
input_player2_r_y_plus =
input_player2_r_y_minus =

completing the values accordingly, and they should be applied to all games. I think that if you create one core override, you can see those values in the file saved by RetroArch, under /opt/retropie/configs/all/retroarch/config/remaps/<core_name>.

Ohris

Will try these methods today.
I also sent a reclamation to the amazon seller to send me a replacement stick... Luckully I can also just buy one more its not that expensive... hopefully the next one will be built correctly.

grant2258

take restrictor off (the clear plastic bit) and twist the pcb so the plugs face the same way then put the restrictor back on job done.

instructions to remove the restrictor

https://www.google.com/search?client=firefox-b-d&q=how+to+remove+a+sanway+restroctor#kpvalbx=1

Ohris

@grant2258 Oh snap... Will for sure test this when I get home. Did not know this could be done and did not want to damage the stick so I did not try to blindly start disassembling it. But I will try to do this with the instructions you provided.

Hopefully this will fix my last mod problem... after that I only have issues with emulators and bios files. :D

Ohris

@grant2258 So the pcb should just rotate? or is it attached somehow after I take the restrictor off? I need to rotate the other one 90 degrees so that the joysticks are the same and then controls should be ok.

grant2258

the wiring plugs just need to face the same position the restrictor is on thing keeping the pcb its the same size on all 4 coreners to you can rotate the board any way you like. You just lift it up and put it back in

Ohris

@grant2258 Not sure if I understood correctly but I cannot rotate the metal plate (or I can but there is no room to do that on my board) that has the screw holes that attach to the wooden control board... I need to be able to rotate everything else though. Well once I get home i can see if I can do that.

grant2258

take the clear restrictor plate off the pcb can liffted out and rotated and put back no need to remove and screws or the metal plate it will be clear what to do when you get the restictor off. If you get stuck when doing just ask ill talk you through it

Ohris

@grant2258 Thanks again... sounds simple but in case I still cannot manage Il ask more :D
It should be fine as long as it really does lift away that easy... sounds simple enough.

Ohris

@grant2258 Thanks. I managed to rotate the joystick. It was as easy as you said. Now everything works perfectly.

grant2258

Great news well done!

Darren01274

I have same problem but not with all games, some games when I press player 1 fire button on a co-op game it works on the second player? checked the dragon encoders and all wired exactly the same on both encoders?