Pi Zero Lagging with GBA emulation

luisito

@quicksilver I have been thinking about a full size pi, but other posts expect the pi 4 image until xmas at best. So I don’t know if I should buy a pi 3. 🧐

Does resolution affect overall performance? I am trying to display it on my computer monitor full HD at 27 inches. Will it run better or faster in those mini 3.5 inch displays?

I plugged in my USB to dump some ROMs, and the frame rate went to 5fps and it froze for a solid minute. I am disliking the zero a lot.

Efriim

Maybe disable video threading?
settings >> video >> videothreading = off
settings >> drivers >> video = glcore/gl (if available)
settings >> latency >> gpu stuff = off
settings >> framethrottle >> rewind/gsync = off

Initialize with runcommand, to set resolution = CEA 1-4

1ghz should be enough for gba I think???

how about reading from commandline, background processes, I guess you can do that with top, htop

dankcushions

@luisito retropie defaults to 640x480 for libretro emulators on pi 0/1, so resolution should not be an issue. also, the physical size of the screen is not a factor, since you can typically run low resolutions on large displays no problem.

luisito

@Efriim I have changed all the setting with the exception of runcommand because I can't figure out where it is (I tried the runcommand option from RetroPie but it doesn't show as option in the submenus).

With your proposed changes now I have managed to reach steady 32.7 FP, with the casual drop to 30 FPS.
However, the main RetroPie menu sometimes drop to 12 FPS.
If I access RetroArch within the game it pumps it to 60 FPS, but that is because the emulation gets paused.
Zero still hoovers at a steady 42C at max temperature and 37C when idle.

It definitely help by a lot, so thanks!! :D
Still looks funny and feels slow but now it is playable.

However, I still don't understand why the FPS are so low. A lot of people manage 60 FPS without a sweat with GBA games.

And now, I am not sure what I did, changed or broke, but it seems that Hotkey (Select) + Right Shoulder, doesn't save state anymore.

luisito

@dankcushions said in Pi Zero Lagging with GBA emulation:

for libretro emulators on pi 0/1, so resolution should not be an issue. also, the physical size of the screen is not a factor, since you can typically run low resolutions on large displays no problem.

Thanks! I was under the impression that the GPU would have to squish more out for larger screens to achieve the desired scale.

dankcushions

@luisito i think it sounds to me like you've changed some settings in your tweaking, or perhaps weren't running from stock retropie in the first place. i would personally start from a fresh retropie standard image, no overclocking, and then see what it's like from there. once you've changed settings it's almost impossible to diagnose

luisito

@dankcushions Sure, I will do that.
There is a new image right?
I will report after doing all that. Perhaps during the weekend if time allows 😁

Efriim

@luisito
Or you could upload your settings and I can run a diff on them to highlight all the changes.
Or delete the settings which should give you a new one, provided the overrides are also deleted.
network~\configs\all\retroarch.cfg
/opt/retropie/configs/all/retroarch.cfg

Were you able to try htop from ssh commandline?

upload large text files to pastebin.com
I will edit the post above about runcommand.

Since you got positive results if it wasn't just a fluke, you could try disabling a few more things
settings >> drivers >> audio = alsathread
settings >> video >> vertical sync = off
settings >> video >> frame delay = 0 (alternative to turning the vsync off, maybe try a quick compare of value 7 and 15 just to see, then turn off vsync)
settings >> latency >> run-ahead = off

and
settings >> user interface >> threaded tasks = off (Haven't had to use this before.)
settings >> user interface >> appearance >> icon shadows = off

dankcushions

@Efriim said in Pi Zero Lagging with GBA emulation:

Or delete the settings which should give you a new one, provided the overrides are also deleted

no, this will give you retroarch defaults which are not retropie defaults, and will give you a whole new set of problems.

i really wouldn't recommend changing any of the settings you are recommending. retropie will default to the right settings for all of these.

luisito

Thanks a lot! everybody. Things are improving so I think we are on the right track and your help is moving things forward.
Have a lot of responsibilities for the next 4 days.So I will post again next week.

But for the meantime I ran a very quick thop and hop, and the system is 97%m idle, nothing in the background eating power. Even the ram sits at 10% of maximum.

luisito

@dankcushions said in Pi Zero Lagging with GBA emulation:

no, this will give you retroarch defaults which are not retropie defaults, and will give you a whole new set of problems.

I was unaware of this. This is a revelation.

Solid One

Try gpsp's non-retroarch version. With this version, you'll probably have less lag on GBA games, since it consumes less resources than the default retroarch version.

I've tested this version on a Raspberry Pi 1 B+, and I remember playing some GBA games without lag. It was on 2015, and back then, if my memory serves, there was no lr-gpsp yet.

I don't know if it'll work on your Pi Zero, but assuming Pi Zero and Pi 1 has approximately the same hardware, there's the chance that it can work.