Guys, thankyou.....I had missed putting the bios zip file into the ROM directory, dont know how many times in reading I must have ignored it !!

Really appreciate your help, thankyou....works like a charm :-)

Pete

Something in the mame database has gotten corrupted. Clear out everything that is cached with
rm -rf ~/.sselph-scraper

Alright. After updating it, now everything works like a dream. :) Thank you. :D

@Hydro said in Ri3 - Killer Instinct 2 & SNK vs. CAPCOM Chaos Plus Not Woking On AdvMame 1.4 & 0.94.:

can't find any advmame-1.4 (0.106) - CHD v3 !

Yeah, quite honestly, I've never run into older CHD versions than whatever the currently available set version is at the time. It's likely due to them being so large that there's not any good reason to keep them available. At first thought, you might consider them valuable for use in lower-powered devices like the Raspberry Pi that require older versions of MAME to run at full speed, but the catch-22 is that the Raspberry Pi and devices like it aren't powerful enough to run the CHD-based games to begin with.

Two things of interest to add. First, in searching for more information on this issue, I discovered that the Daphne source was patched for use in RetroPie by forum/team member @shmoopty, and I thought it might help to tag his name in this posting. Second is a listing of the daphne_log_txt from just after running a game with this problem. Again I chose to use 'Us vs. Them' as an example. The lines that read MACH3 NOTE: CPU #1 queried 0x8000 even though nothing is available seem to be reporting the problem as this represents each time I pressed a button that would normally trigger a sound.

--DAPHNE version 1.0.13 --Command line is: /opt/retropie/emulators/daphne/daphne.bin uvt vldp -nohwaccel -framefile /home/pi/RetroPie/roms/daphne/uvt.daphne/uvt.txt -homedir /opt/retropie/emulators/daphne -fullscreen --CPU : UnknownCPU 0 MHz || Mem : 0 megs --OS : Linux 4.4 || Video : Unknown video --OpenGL: Compiled In --RGB2YUV Function: C --Line Blending Function: C --Audio Mixing Function: C Setting alternate home dir: /opt/retropie/emulators/daphne Set 640x480 at 16 bpp with flags: 20 Initializing sound system ... GI Sound chip initialized at 2000000 Hz GI Sound chip initialized at 2000000 Hz Joystick #0 was successfully opened Remapping input ... Loading compressed ROM image usvs.rm4...8192 bytes read. Loading compressed ROM image usvs.rm3...8192 bytes read. Loading compressed ROM image usvs.rm2...8192 bytes read. Loading compressed ROM image usvs.rm1...8192 bytes read. Loading compressed ROM image usvs.rm0...8192 bytes read. Loading compressed ROM image usvsdrom.1...8192 bytes read. Loading compressed ROM image usvsyrom.1...8192 bytes read. Loading compressed ROM image usvs.rm4...8192 bytes read. Loading compressed ROM image usvs.rm3...8192 bytes read. Loading compressed ROM image usvs.rm2...8192 bytes read. Loading compressed ROM image usvs.rm1...8192 bytes read. Loading compressed ROM image usvs.rm0...8192 bytes read. Loading compressed ROM image usvs.fg3...16384 bytes read. Loading compressed ROM image usvs.fg2...16384 bytes read. Loading compressed ROM image usvs.fg1...16384 bytes read. Loading compressed ROM image usvs.fg0...16384 bytes read. Loading compressed ROM image usvs.bg0...4096 bytes read. Loading compressed ROM image usvs.bg1...4096 bytes read. Framefile parse succeeded. Video/Audio directory is: /home/pi/RetroPie/roms/daphne/uvt.daphne/./ YUV overlay is done in software (ie unaccelerated). Loaded 4096 bytes from /opt/retropie/emulators/daphne/ram/uvt.gz Booting ROM ... MACH3 NOTE: CPU #1 queried 0x8000 even though nothing is available MACH3 NOTE: CPU #2 queried 0xA800 when no data was present MACH3 NOTE: CPU #1 queried 0x8000 even though nothing is available PR-8210 : reject received (ignored) Play Search to 1 received Search to 31 received MACH3 NOTE: CPU #1 queried 0x8000 even though nothing is available Play LDP : Stepping forward one frame Search to 40 received [blocking] MACH3 NOTE: CPU #1 queried 0x8000 even though nothing is available Search to 5976 received Play MACH3 NOTE: CPU #1 queried 0x8000 even though nothing is available MACH3 NOTE: CPU #1 queried 0x8000 even though nothing is available MACH3 NOTE: CPU #1 queried 0x8000 even though nothing is available MACH3 NOTE: CPU #1 queried 0x8000 even though nothing is available Saved 4096 bytes to uvt.gz Freeing memory used to store audio stream... Shutting down sound system... Shutting down video display...

Also, on that screen, if you plug in a known controller, it should exit (might need to hold a button down)

I got it, thanks for the help. As a note, if you open the .XML you want to clear and edit it by deleting its contents and saving, the scrape data clears from EmulationStation. But the system still looks for it, so upon exiting or shutting down, you will get a message saying "Cannot find Gamelist" probably as it tries to regenerate it. So yes, I exited ES back to the console and THEN deleted the .XML totally. Restarted, confirmed no scrape data in Arcade, then shut down, and confirmed no more message.

Post support questions in the help / support area.

Please post help/support requests in the Support forum.

PS. I have moved this thread to help/support

Excellent, I've just found out if i back it all up configs etc then run it through SD card formatter it will remove the partitions.

@Duhjoker said in 8bitdo FC30pro not working in emulators:

Why are my posts all in code squares ?

Because you used a four space indent which can be used for code blocks. http://commonmark.org/help/

@cujoac said in Back-Up for fresh install:

on't have to go through the trouble of re-coding my control settings and re-scrape my games. Let me know, I'm not sure w

Your main retroarch.cfg which can be found in:

/opt/retropie/configs/all/

Or if you have a windows computer just enter the following path into windows explorer and you should be into the config folder:

\RETROPIE\configs\all

I also would copy the config files of my controllers. They are located in the /retroarch-joypads/ folder which is located in the path I mentioned above. Saved me a ton of headache lol.

I like ice cream.

.7 amps, and it actually tried to boot... Amazing lol...

I second the ultimarc utrak works fine. Also, the dual tankstick works great too

@auswear WORKED LIKE A CHARM! Thanks so much!

@mediamogul said in How to activate Remote Control Setup GUI from PuTTY:

@Phoenix

Seek, and ye shall find:
https://github.com/retropie/retropie-setup/wiki/updating-retropie#making-a-backup-option-1

lol I didn't look for that one as I was more concerned about how to restart the emulationstation remote setup. That's a very handy little step, especially if it's a common issue ;)

Was totally my fault! I forgot I copied across an older config.txt file so it was missing:

# Enable audio (loads snd_bcm2835) dtparam=audio=on