@ThatClassyGaz said in 8bitdo not found on Rpi3:

It does work. Keep trying! I had the same issue with my FC30 Pro. As annoying as it sounds, just keep going through the 'back' and 'search' loop. Eventually it WILL find it. I had to try maybe 10 to 15 times before mine would pop up. :)

A more easy route to take is to first start bluetoothctl.

sudo bluetoothctl power on agent on scan on devices

Start the controllers with start+r.
Keep pressing the different buttons until it shows up and don't shut down.

Takes a minute or less.

You can also type devices a couple of times if you don't want to wait for bluetoothctl scanning to update.

After the controllers are recognized quit bluetoothctl and start Retropie-Setup now they will show from the start and you don't have to try 10-15 times.

Have you updated RetroPie-Setup-Script?
Changed CPU Governor to Performance in Retropie Setup?

And finally if that don't work have a look here

wrong romset for version of mame - check the documentation https://github.com/RetroPie/RetroPie-Setup/wiki/Managing-ROMs

There's a link in this thread that lists the titles that are playable.

https://retropie.org.uk/forum/topic/23/n64-compatability-chart

@Heightzx23 https://github.com/RetroPie/RetroPie-Setup/wiki/themes#white-screen-of-death

Yeah it might be a feature someday like PiPlay. You can also modify /etc/emulationstation/es_systems.cfg. For each system you want to comment out put a <!-- before <system>and <--after </system>. That will comment out that whole emulator from showing up in you list. Example below for the Apple II.

<!-- <system> <name>apple2</name> <fullname>Apple II</fullname> <path>/home/pi/RetroPie/roms/apple2</path> <extension>.sh .SH</extension> <command>/opt/retropie/supplementary/runcommand/runcommand.sh 0 _SYS_ apple2 %ROM%</command> <platform>apple2</platform> <theme>apple2</theme> </system> <--

Hi:

I have that setup, everything seems to work fine, i'm using ps3 controllers and they work well.

Only issue is when playing games like outrun, i would like to used analog stick instead of buttons for turning.

I have tried to iused "tab" key to change buttons but no luck. what cna I do to change buttons mapping inside games?

Regards and thank you for your time.

@pierpa86

solved... emulation station cant detect joypad with no buttons, you need to use joypad with at least 1 button for detect.

thanks Finhead,
but I resolved. the problem was in lair.m2v file ...it was no decrypt.
and daphne_log.txt file wasn't found because there was -nolog in lair.command file..
just a noobs error! :)
dak.

Wow. People weren't kidding about sselphs scraper. To say it was faster is an understatement. It scraped all my roms in about an hour. The other by comparison could take hours to go through a single large console library.

Looks like my limited success is becoming more and more limited. Now, without changing any settings in the config.txt file the signal lasts for 2-3 minutes, then goes black, then goes to no signal at all. The only change I have made is adding roms to the roms folders.

@opensourcefan the archive has never worked for me, but yeah I dont even know why its an option anymore. probably cause emulationstation development is dead so makes sense there are obsolete things in there still